4 Bay USB 3.0 eSATA to SATA Standalone 1:3 HDD Hard Drive Duplicator Dock

Duplicate one SATA Hard Drive onto three Hard Drives simultaneously

Product ID: SATDOCK4U3RE

0 stars (0 reviews) |
  • Sector-by-Sector drive duplication, including the HPA
  • Integrated LCD display for duplication progress and options menu
  • SuperSpeed USB 3.0 compliant host interface with supported data transfer rates of up to 5 Gbps
Your price
$765.99CAD

In stock: CA: 3 | US: 290

Where to buy StarTech.com products
Where to buy

The SATDOCK4U3RE USB 3.0 and eSATA 1-to-3 Hard Drive Duplicator docking station enables you to duplicate/clone a single SATA hard drive to up to three other SATA drives simultaneously, as a standalone device. The duplicator can also function as a regular 4-bay hard drive docking station, by connecting to a host computer system. Large capacity drives (tested with up to 4TB 3.5" and 1TB 2.5" drives per bay) can be used to greatly enhance your computer's storage/backup capabilities.

Able to perform 1:3 sector duplication, including HPA, from a single SATA drive onto three others simultaneously (at a rate of up to 72 MBps), the duplicator/docking station can save you time and effort. As an external HDD dock, it can be connected to your host computer through USB 3.0 or eSATA, providing data transfer speeds up to 5 Gbps or 3Gbps respectively, from the hard drives to your computer system.

Features Quick and Secure Erase functions and support for IDE hard drives using the included SATA to IDE hard drive adapter (SAT2IDEADP). This drive eraser ensures data is purged (a secure erase) which is required by government agencies and organizations who have strict guidelines on deleting data.  Purging is a very secure method of erasing data from your storage device which complies with the NIST 800-88 Rev. 1 media sanitation standard established by the National Institute of Standards and Technology.

Applications

  • Creating multiple exact replicas of a source drive onto a new drive for large deployment of identical computer systems
  • Law enforcement and forensic technicians who need one or more exact copies of the original hard drive for testing or investigation
  • SMB, OEM, System Integrators, IT and service technicians requiring quick access to bare external hard drive contents, or the ability to clone data for data / disk recovery.

The StarTech.com Advantage

  • Create 3 exact copies of a source SATA drive simultaneously, without having to connect to a computer
  • Access up to 4 SATA hard drives simultaneously over a single USB 3.0 or eSATA connection
  • Dual, variable speed fans allows you to adjust the amount of cooling for any kind of environment or drive type

Partner Numbers

  • Ingram Micro Canada 83763P
  • Tech Data Canada 0672A8
  • SYNNEX Canada 4728669
  • D&H Canada SATDOCK4U3RECA
  • ASI Distribution Canada 115126
  • UPC 065030843881

Compatibility

  • OS Independent logo
OS independent; No software or drivers required

Specifications

Warranty Information Warranty 2 Years
Connector(s) Drive Connectors 4 - SATA Data & Power Combo (7+15 pin)
Host Connectors 1 - eSATA (7 pin, Data)
1 - USB Type-B (9 pin) USB 3.0
Environmental Operating Temperature 5°C to 80°C (41°F to 176°F)
Storage Temperature -40°C to 70°C (-40°F to 158°F)
Humidity 8%~90% RH
Hardware Number of Drives 4
Drive Size 2.5in & 3.5in
Compatible Drive Types SATA
Fans 2 - 60 mm
Chipset ID JMicron - JMB394
JMicron - JMS539
Indicators LED Indicators 4 - Drive Power/Activity
Packaging Information Package Length 13.5 in [34.3 cm]
Package Width 6.7 in [17 cm]
Package Height 8.5 in [215 mm]
Shipping (Package) Weight 6.0 lb [2.7 kg]
Performance Maximum Data Transfer Rate 3Gbps
Type and Rate USB 3.0 - 5 Gbit/s
SATA II (3 Gbps)
Port Multiplier Yes
Duplication Modes Sector by Sector (Whole Drive)
Erase Modes Quick Erase
Max Drive Capacity Currently tested with up to 4TB 5400 RPM 3.5" hard drives per bay (16TB total) and 1TB 5400 RPM 2.5" hard drives (4TB total)
Duplication Speed 4.2GBpm
Erase Modes Secure Erase (NIST SP 800-88 Rev 1 - Purge)
Insertion Rating 15,000 cycles per bay
Physical Characteristics Color Black
Material Plastic
Product Length 11.2 in [28.4 cm]
Product Width 6.8 in [172 mm]
Product Height 3.8 in [9.6 cm]
Weight of Product 38.2 oz [1084 g]
Power Power Source AC Adapter Included
Input Voltage 100 - 240 AC
Input Current 2.0 A
Output Voltage 12V DC
Output Current 6.5 A
Power Consumption (In Watts) 78
Software OS Compatibility OS independent; No software or drivers required
What's in the Box Included in Package 1 - SATA Duplicator Dock
1 - SATA to IDE Adapter
1 - eSATA Cable
1 - USB 3.0 Cable
1 - 44-Pin to 40-Pin IDE Cable
1 - Package of Mounting Screws
1 - 40-pin IDE Cable
1 - SP4 to LP4 Power Cable
1 - Universal Power Adapter (NA/JP, UK, EU, ANZ)
1 - Instruction Manual

Accessories

SAT2IDEADP

SATA to 2.5in or 3.5in IDE Hard Drive Adapter for HDD Docks

Use your 2.5in or 3.5in IDE hard drives in a SATA HDD Docking Station

Your price
$43.99CAD

In stock: CA: 24 | US: 1598

Where to buy StarTech.com products
HDDSLEV25

2.5in Silicone Laptop Hard Drive Protector Sleeve with Connector Cap

Provide protection against shocks/impacts to a 2.5in hard drive

Your price
$13.99CAD

In stock: CA: 33 | US: 207

Where to buy StarTech.com products
HDDSLEV35

3.5in Silicone Hard Drive Protector Sleeve with Connector Cap

Provide protection against shocks/impacts to a 3.5in hard drive

Your price
$16.99CAD

In stock: CA: 42 | US: 95

Where to buy StarTech.com products
HDDCASE25BK

2.5in Anti-Static Hard Drive Protector Case - Black (3pk)

Provides safe handling and anti-static protection for most 2.5in hard drives

Your price
$29.99CAD

In stock: CA: 22 | US: 22

Where to buy StarTech.com products
USB3SAB6BK

6 ft Black SuperSpeed USB 3.0 Cable A to B - M/M

Connect to your external solutions and transfer data at 10x the speed of USB 2.0

Your price
$17.99CAD

Check reseller availability

Where to buy StarTech.com products
USB3SAB3BK

3 ft Black SuperSpeed USB 3.0 Cable A to B - M/M

Connect to your external solutions and transfer data at 10x the speed of USB 2.0

Your price
$15.99CAD

Check reseller availability

Where to buy StarTech.com products
USB3SAB10BK

10 ft Black SuperSpeed USB 3.0 Cable A to B - M/M

Connect to your external solutions and transfer data at 10x the speed of USB 2.0

Your price
$31.99CAD

Check reseller availability

Where to buy StarTech.com products
ESATA3

3 ft Shielded External eSATA Cable M/M

Connect your external SATA storage devices to your Laptop or desktop.

Your price
$15.99CAD

In stock: CA: 73 | US: 1029

Where to buy StarTech.com products
ESATA6

6 ft Shielded External eSATA Cable M/M

Connect your external SATA storage devices to your Laptop or desktop.

Your price
$22.99CAD

In stock: CA: 38 | US: 1111

Where to buy StarTech.com products
ECESATA254F

2 Port Flush Mount ExpressCard 54mm eSATA II Controller Adapter Card

Add 2 flush mounted eSATA ports to a laptop through an ExpressCard/54 slot

Your price
$46.99CAD

In stock: CA: 27 | US: 0

Where to buy StarTech.com products
SVA12DN4NEUA

DC Power Adapter - 12V, 6.5A

Replace your lost or failed power adapter

Your price
$69.99CAD

In stock: CA: 2 | US: 440

Where to buy StarTech.com products

Drivers/Downloads

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Manual(s):

Datasheet

Product Support

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Frequently Asked Questions

Before You Buy

To determine if your hard drive will work in this device, on the product page, click the Technical Specifications tab, and do the following:

  • Make sure that the device supports the storage size of your hard drive. If the storage size of your hard drive is larger than what the device was tested with, the hard drive will likely still work with the enclosure.
  • Confirm that your hard drive uses the same interface type as the device. For example, IDE, SATA, or M.2.
  • Make sure that the device supports the physical size of your hard drive, such as 2.5 inches or 3.5 inches.
  • Verify that the power consumption of your hard drive doesn’t exceed the power output of the device. If you’re using multiple hard drives, make sure that the combined power consumption of all of the hard drives doesn’t exceed the power output of the docking station.

StarTech.com duplicators were not designed to recover failing or damaged drives. If the duplicator encounters a corrupt or unreadable sector, the duplication halts and fails.  If the source drive has bad sectors, use the Read Error Skip feature if your model of duplicator has it; however, if there are too many errors, it may still halt and fail even with this feature. If this happens, you will need third-party recovery software or custom-built recovery hardware to copy from a failing or damaged drive.

Software-level encryption on the drive poses no issue to StarTech.com duplicators, as the duplicators copy encrypted data sector by sector over to the new drive.

Hardware-level encryption or BIOS level hard drive locks cause the duplication to halt and fail, as the drive is unable to read or write the sectors that are encrypted.

Duplication of Hidden Protected Area (HPA) Partitions or Extended Industry Standard Architecture (EISA) cause the duplicator to halt and fail, as the drive cannot read and write the protected partitions on the drive.

Note: Our UNIDUPDOCK, SATDOCK22RE and SATDOCK4U3RE do include the ability to copy HPA partitions, but the duplication is still dependent on how the HPA partition is written to the hard drive, whether or not it is encrypted and how it is encrypted.

Solid-state drives (SSDs) use SATA connectors to access power and transfer data. Any duplicator that can copy to or from SATA hard drives will work with a StarTech.com duplicator.

Note: If you use a dock to duplicate SSDs, keep in mind that the StarTech.com disk duplicators execute a sector by sector read and write. SSDs are rated by a number of reads and writes. Repeated duplication and sector by sector reads and writes of SSDs can reduce the life cycle of the drive.

Some old hard drives (often low capacity as well) may not work because they use an old IDE standard not supported by the duplicator.  Use a newer drive to determine if the duplicator works or if the drive is not compatible.

Quick and secure erase functions

Quick erase and secure erase are functions the duplicators call on the hard drives themselves. How they work depends on the manufacturer of the hard drive.

Department of Defense erase function

A Department of Defense (DoD) erase is a function performed by the duplicator where it does three passes. The first pass writes all 0s. The second pass writes all 1s. The third pass writes 0s and 1s randomly.

Note: Not all duplicators will feature all of these erase modes. It is important to review the product manual to confirm the available erase modes.

StarTech.com hard drive and flash drive duplicators perform a sector by sector copy, which means that the target drive must be the exact same size (down to the sector) or larger than the hard drive or flash drive that is being copied. During a sector by sector copy, each individual sector is copied over to the target drive, regardless of whether or not any data is present. A 500 GB hard drive with 50 GB of data on it will take the same amount of time to copy as a 500 GB hard drive with 450 GB of data on it.

If you have two hard drives or flash drives that are listed as the same size but are different makes or models, you need to check how large both drives are down to the sector to ensure that the target drive is the exact same size or larger.

Troubleshooting

You do not need to format your target hard drive before you begin to duplicate it, because the target hard drive is automatically overwritten during the duplication process.

StarTech.com hard drive duplicators only read from the source drive and only write to the target drives while in standalone duplication mode .  A duplication that fails or halts will not cause a problem with the source drive.

You can use this device to duplicate an internal hard drive with the stand alone duplicator function if you remove the hard drive from the computer and connect it directly to this device.

This docking station allows the hard drive to enforce its own power state, as opposed to enforcing a power state that keeps the hard drive active at all times. Since most newer hard drives have low-power energy conservation modes, this will cause the hard drive to enter an idle state if it is not used for a certain amount of time. 

 

  1. The drive may be damaged. Test with a known-working drive, or test the drive directly to a PC.
  2. The operating system on the computer may not support reading and writing to the file system on the docked hard drive or SSD.  Remember, Windows cannot read Mac or Linux file systems. Also, macOS can read but not write to NTFS drives.
  3. If the drives came from a RAID (Redundant Array of Independent Disks), they would not be accessible in our docking stations.
  4. If the drive uses 4Kn sectors, check the technical specifications of the docking station, and ensure it can read 4Kn drives.

When you troubleshoot issues with a hard drive dock or duplicator, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • IDE, SATA, and eSATA cables
  • Hard drives
  • Hard drive dock or duplicator

To test your setup components, try the following:

  • Use the cables, hard drives, and hard drive dock or duplicator in another setup to see if the problem is with the components or the setup.
  • Use a different cable, hard drive, and hard drive dock or duplicator in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard drive and hard drive dock or duplicator, it is recommended that you do the following:

Note: For a hard drive duplicator you may need to switch the device to PC mode (if available).

  1. To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter. Check to see if your hard drive is listed.
  2. Do one of the following:
  • If the hard drive is listed with unallocated space, the hard drive needs to be reformatted. Right-click unallocated and click New Simple Volume. Follow the on-screen instructions to complete the reformatting.​

Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive. 

  • If the hard drive is listed as healthy but does not have a drive letter, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.

Note: A formatted hard drive will not show up in Computer or My Computer until it has a drive letter assigned to it.

The hard drive duplicator copies the exact partition from the source drive to the target drive. Since it is required that you use a target drive that is equal or larger in size than the source drive a portion of the target drive appears as free space. You can append free space to the live partition on the target drive so that the full size of the drive can be utilized.

Note: A partition cannot be extended on an operating system drive that is in use. You must extend the partition when it not being used by the operating system, and ideally when it is still connected to the duplicator.

Extend a partition on a computer running Windows

Note: Do not extend a System Reserved partition. Only extend the primary partition, which is typically the largest in size and formatted with NTFS or FAT32.

After you have successfully duplicated a drive and the target drive is still connected to your computer system (for example, through the duplicator), complete the following:

  1. Press the Windows key + R.
  2. Type compmgmt.msc and click Ok.
  3. In Computer Management, on the left side of the screen, click Disk Management.
  4. Find the target drive. It will most likely be at the bottom of the list, have a partition that is the same size as the source drive, and have an unallocated area on the drive.
  5. On the target drive, right-click the last partition on the right side of the screen and click Extend Volume.
  6. In the Extend Volume wizard, click Next. By default, the remaining drive area is the amount of space used.
  7. Click Next > Finish.

The primary partition on the drive now uses the entire drive area.

You can use the SATDOCK4U3RE to skip bad sectors on a hard drive. For more information, visit the following FAQ: http://www.startech.com/ca/faq/hard_drive_duplicators_failing_drives.

To use the SATDOCK4U3RE to skip bad sectors, you need to enable Read Error Skip. By default, Read Error Skip is disabled.

To enable Read Error Skip, complete the following:

  1. Turn on the SATDOCK4U3RE.

  2. Press ENT four times to enable Duplicator mode.

  3. Press ESC to open the menu.

  4. Press UP to open the Advanced Setup menu.

  5.  Press ENT twice to open the ReadErr Skip menu.

  6. Select Enable and then press ENT twice.

  7. Wait a few seconds for the unit to exit the menu.

Ensure there is no USB cable connecting the duplicator to a computer.

How To

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

It is not possible to duplicate from a larger drive to a smaller one.  The capacity of the target drive must be equal to or greater than that of the source drive.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
*Product appearance and specifications are subject to change without notice.

Customer Reviews

(0 reviews)
0 out of 5 stars
  • 5 (0)
  • 4 (0)
  • 3 (0)
  • 2 (0)
  • 1 (0)
Tell us what you think of this product.
Need a little help getting started?

Check out our review guidelines.

Feedback Back to top