Product ID: SATSASBAY425
The SATSASBAY425 Removable SAS and SATA Backplane/Mobile Rack offers a convenient and efficient way to maximize the storage density of your PC or Server when drive bay space is limited.
The backplane can house up to four 2.5" SAS or SATA removable hard drives (HDD) or solid state drives (SSD) (9.5mm, 12.5mm, or 14.8mm thick) in a single 5.25in drive bay, while supporting high speed data transfer rates up to 6 Gbps - a compact, RAID-compatible storage solution.
To maximize performance and utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with a compatible controller.
To help dissipate operating heat, the SAS/SATA backplane features a sturdy aluminum casing that also helps to protect drives and valuable data from in-transit damage.
|Warranty Information||Warranty||2 Years|
|Connector(s)||4 - Drive Connectors||SATA Data & Power Combo (7+15 pin)|
|1 - Host Connectors||LP4 (4 pin; Large Drive Power)|
|4 - Host Connectors||SATA (7 pin, Data)|
|Environmental||Operating Temperature||-10°C to 70°C (14°F to 158°F)|
|Storage Temperature||-20°C to 75°C (-4°F to 167°F)|
|Hardware||Number of Drives||4|
|Compatible Drive Types||SAS & SATA|
|2 - Fans||40 mm|
|Fan Bearing Type||Sleeve Bearing|
|Indicators||4 - LED Indicators||Green (Solid - Power, Blinking - Activity)|
|Packaging Information||Package Length||9.4 in [23.8 cm]|
|Package Width||2.6 in [67 mm]|
|Package Height||6.7 in [17.1 cm]|
|Shipping (Package) Weight||2.4 lb [1.1 kg]|
|Performance||Hot Swap Capability||Yes|
|Insertion Rating||25, 000 Cycles|
|Air Flow Rate||7.81 CFM|
|Noise Level||29.07 dBA|
|Max Drive Height||0.6 in [15 mm]|
|Product Length||6.9 in [17.5 cm]|
|Product Width||5.7 in [14.6 cm]|
|Product Height||1.7 in [42 mm]|
|Weight of Product||27.9 oz [790 g]|
|What's in the Box||1 - Included in Package||4 Drive Backplane|
|4 - Included in Package||24in SATA cables|
|1 - Included in Package||Screw Kit|
Power up to 3 devices using a SATA power connector from the computer power supply
In stock: CA: 313 | US: 6767
Power an IDE hard drive from a SATA Power connection.
In stock: CA: 45 | US: 0
Connect and position SATA drives easily - designed for larger cases
In stock: CA: 31 | US: 372
This high quality SATA cable is designed for connecting SATA drives even in tight spaces.
In stock: CA: 0 | US: 1420
SATA hard drive cable, with latching SATA connectors, for securely fastened hard drive installations.
In stock: CA: 339 | US: 16
Latching SATA connectors, for securely fastened hard drive installations.
In stock: CA: 226 | US: 1317
Power up to two 4-pin LP4hard drives or devices, and a floppy drive, from a single SATA power supply connector
In stock: CA: 16 | US: 48
When you troubleshoot issues with a hard drive rack, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
When you test the hard drive and hard drive rack, it is recommended that you do the following:
Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.
Note: A formatted hard drive will not show up in Computer or My Computer until it has a drive letter assigned to it.
Check out our review guidelines.