Product ID: SATSASBP125
In stock: CA: 17 | US: 571
Now it’s easy to increase the storage capabilities of your server or PC while protecting data integrity. This one-bay mobile rack backplane lets you install and easily remove a 2.5in SAS or SATA HDD or SDD in a 3.5in external expansion bay on your desktop PC or server. It’s ideal for system integrators and administrators looking for flexible management of data storage.
The backplane provides an easy, convenient way to install and swap drives between desktops or servers. It supports both SAS and SATA 2.5in drives ranging from 5 to 15mm in height. To maximize the performance of your hard drives, the mobile rack supports SAS II and SATA III for transfer speeds up to 6 Gbps when paired with a compatible controller.
The backplane can be mounted either vertically or horizontally, for error-free tray insertion and maximum compatibility with servers or desktop computers.You can lock the removable steel tray in place, providing an enhanced level of drive protection. The Non-Scratch SATA (NSS) connector provides a high 50,000+ insertion rating, your assurance of long-lasting performance of both the drive and the bay.
Many fast-paced work environments require drives to be removed regularly. This convenient backplane lets you hot swap between systems quickly, without shutting down.
The included drive tray is interchangeable, working with both the single-bay backplane and the 4-bay backplane (SATSASBP425) so you can hot swap between systems for easy file access.
Engineered with high-quality metal, the robust metal housing delivers reliable performance. The venting helps to ensure proper air flow to assist with heat dissipation.
The SATSASBP125 single-bay backplane is backed by a StarTech.com 2-year warranty and free lifetime technical support.
|Warranty Information||Warranty||2 Years|
|Connector(s)||Drive Connectors||1 - SATA Data & Power Combo (7+15 pin)|
|Host Connectors||1 - SATA Data & Power Combo (7+15 pin)|
|Environmental||Operating Temperature||-20°C to 70°C (-4°F to 158°F)|
|Storage Temperature||-40°C to 85°C (-40°F to 185°F)|
|Humidity||0% to 95% (non-condensing) at 25°C|
|Front Door Key Lock||Yes|
|Number of Drives||1|
|Compatible Drive Types||SAS & SATA|
|Number of 2.5 inch bays||1|
|Supported Drive Height(s)||5mm|
|Indicators||LED Indicators||1 - Drive power and activity|
|Packaging Information||Shipping (Package) Weight||1.3 lb [0.6 kg]|
|Package Length||7.8 in [19.8 cm]|
|Package Width||5.9 in [15.1 cm]|
|Package Height||1.7 in [43 mm]|
|Performance||Maximum Data Transfer Rate||6 Gbps|
|Type and Rate||SATA III (6 Gbps)|
|Max Drive Capacity||Tested with hard drives up to 2TB at 7200 RPM|
|Hot Swap Capability||Yes|
|Noise Level||20 bBA|
|Physical Characteristics||Weight of Product||15.5 oz [440 g]|
|Color||Black & Silver|
|Material||Aluminum and Steel|
|Max Drive Height||15.0|
|Product Length||5.6 in [14.1 cm]|
|Product Width||4.0 in [101 mm]|
|Product Height||1.0 in [2.5 cm]|
|Software||OS Compatibility||OS independent; No software or drivers required|
|Special Notes / Requirements||Note||Flammability rating: UL94 - V0|
|What's in the Box||Included in Package||1 - 1-Bay 2.5in SATA/SAS Hard Drive Backplane|
|2 - Drive bay keys|
|1 - 2.5” HDD/SSD Drive Tray|
|1 - SATA cable|
|1 - Drive mounting screw kit|
|1 - Backplane mounting screw kit|
|1 - Quick install guide|
Hot swap with ease by installing four SSDs/HDDs into one 5.25in bay
In stock: CA: 29 | US: 11
Exchange drives with ease with this extra drive tray for SATSASBP425 and SATSASBP125 series backplanes
In stock: CA: 22 | US: 193
Yes, this mobile rack does support hot-swapping of SATA drives. To use this feature, it is required that the SATA port is set to Advanced Host Controller Interface (AHCI) mode and hot-swapping is enabled. On most motherboards, this is performed within the Basic Input/Output System (BIOS) or the Unified Extensible Firmware Interface (UEFI). If you are using a SATA controller card, consult the motherboard manufacturer's technical documentation for the correct steps to accomplish this.
Although mobile racks can enable a Serial Attached SCSI (SAS) drive to connect using a standard Serial ATA (SATA) connector, the hard drive controller must be SAS compatible to properly support SAS drives. SAS controllers can work with SAS and SATA drives, but most SAS drives will only work with a SAS controller.
For further information about SAS and SATA interoperability, refer to the following FAQ: http://www.startech.com/faq/hard_drive_controllers_sas_drive_compatibility.