6 ft DisplayPort to VGA Cable - M/M

Connect your VGA monitor to a DisplayPort-equipped computer using a single cable

Product ID: DP2VGAMM6

0 stars (0 reviews) |
  • No software or drivers required
  • All-in-one cable design
  • Supports PC resolutions up to 1920x1200 (HDTV - 1080p)
Your price
€46.99 EUR
VAT not included in the price

In stock: 93

Where to buy StarTech.com products
Where to buy

The DP2VGAMM6 6ft DisplayPort to VGA (M-M) Cable lets you connect a VGA capable display to a DisplayPort video card/source. The cable provides a connection distance of 6 feet and features a male VGA connector and a male DisplayPort connector.

The DisplayPort to VGA adapter cable supports high bandwidth video transmissions, easily delivering monitor resolutions up to 1920x1200 or HDTV resolutions up to 1080p - allowing you to take full advantage of your VGA display, while using a cutting edge DisplayPort video source.

Backed by a StarTech.com 3-year warranty and free lifetime technical support.

Applications

  • Keep your existing VGA display to use with newer DisplayPort monitors
  • The DisplayPort to VGA cable allows for an easy and hassle free connection to any VGA monitor or projector

The StarTech.com Advantage

  • All-in-one cable design for ease of use and optimal cable management
  • Resolution support of up to 1920x1200 and HDTV resolutions up to 1080p for optimal viewing experience
  • No software or additional driver installation allows for an easy and hassle-free connection to your VGA display

Partner Numbers

  • ALSO DEUTSCHLAND GMBH 2764256
  • CMS Distribution V215639
  • Esprinet DP2VGAMM6
  • Esprinet Italy DP2VGAMM6
  • Exertis 0010011482
  • Exertis IE STCDP2VGAMM6
  • Ingram Austria V931181
  • Ingram DK V931181
  • Ingram Finland V931181
  • Ingram Germany V931181
  • Ingram IE V931181
  • Ingram Micro Belgium 1617453
  • Ingram Micro España V931181
  • Ingram Micro France V931181
  • Ingram Micro Italy V931181
  • Ingram Micro Netherlands 1617453
  • Ingram Micro Sweden V931181
  • Ingram Micro UK V931181
  • Ingram Switzerland V931181
  • Tech Data - Belgium 4428376
  • Tech Data - France 4428376
  • Tech Data - Italy 4428376
  • Tech Data - Netherlands 4428376
  • UPC 065030840255

Specifications

Warranty Information Warranty 3 Years
Connector(s) Connector A 1 - DisplayPort (20 pin)
Connector B 1 - VGA (15 pin, High Density D-Sub)
Environmental Operating Temperature 0°C to 45°C (32°F to 113°F)
Storage Temperature -10°C to 70°C (14°F to 158°F)
Humidity 10%-85%RH
Hardware Active or Passive Adapter Active
AV Input DisplayPort - 1.2
AV Output VGA
Audio No
Connector Plating Gold
Cable Jacket Material PVC - Polyvinyl Chloride
Packaging Information Package Height 22 mm [0.9 in]
Package Length 22 cm [8.7 in]
Shipping (Package) Weight 0.1 kg [0.2 lb]
Package Width 20 cm [7.9 in]
Performance Audio Specifications VGA - No Audio Support
Maximum Cable Length 1828.8
Maximum Digital Resolutions 1920x1200 / 1080p
Physical Characteristics Product Height 0 cm [0.0 in]
Weight of Product 104 g [3.7 oz]
Product Width 0 mm [0.0 in]
Color Black
Cable Length 1828 mm [72.0 in]
Product Length 182.8 cm [72.0 in]
What's in the Box Included in Package 1 - 6 ft DisplayPort to VGA Cable - M/M

Accessories

MXT101HQ3

3 ft Coax High Resolution VGA Monitor Extension Cable - HD15 M/F

Connect your VGA monitor with the highest quality connection available

Your price
€9.99 EUR

In stock: 41

Where to buy StarTech.com products
MXT101HQ

6 ft Coax High Resolution VGA Monitor Extension Cable - HD15 M/F

Extend your VGA monitor connections by 6ft

Your price
€8.99 EUR

In stock: 311

Where to buy StarTech.com products
MXT101HQ10

10 ft Coax High Resolution VGA Monitor Extension Cable - HD15 M/F

Extend your VGA monitor connections by 10ft

Your price
€14.99 EUR

In stock: 118

Where to buy StarTech.com products
MXT101HQ_25

25 ft Coax High Resolution VGA Monitor Extension Cable - HD15 M/F

Extend your VGA monitor connections by 25ft

Your price
€23.99 EUR

In stock: 23

Where to buy StarTech.com products
Your price
€34.99 EUR

In stock: 13

Where to buy StarTech.com products
GC1515MFRA2

Right Angle VGA to VGA Cable Adapter Type 2 - M/F

Add space for your VGA port and connect a VGA cable even in tight installation spaces

Your price
€6.99 EUR

In stock: 138

Where to buy StarTech.com products
GC15HSF

Slimline VGA HD15 Gender Changer - F/F

Convert a VGA male connector into a VGA female connector

Your price
€3.99 EUR

In stock: 1388

Where to buy StarTech.com products
MXT101HQ_50

50 ft Coax High Resolution VGA Monitor Extension Cable - HD15 M/F

Extend your VGA monitor connection without losing video signal quality

Your price
€46.99 EUR

In stock: 59

Where to buy StarTech.com products
MXT101HQ_100

100 ft Coax High Resolution VGA Monitor Extension Cable - HD15 M/F

Extend your VGA monitor connections by 100ft

Your price
€83.99 EUR

In stock: 19

Where to buy StarTech.com products
VGASPL1VV

1 ft VGA to 2x VGA Video Splitter Cable – M/F

Mirror the output from a VGA source to two VGA monitors

Your price
€14.99 EUR

Check reseller availability

Where to buy StarTech.com products
MXT101

6ft VGA Monitor Extension Cable - HD15 M/F

Extend your VGA monitor connections by 6ft

Your price
€4.99 EUR

In stock: 17

Where to buy StarTech.com products
MXT105

15 ft VGA Monitor Extension Cable - HD15 M/F

Extend your VGA monitor connections by 15ft

Your price
€7.99 EUR

In stock: 65

Where to buy StarTech.com products
MXT10110

10 ft VGA Monitor Extension Cable - HD15 M/F

Extend your VGA monitor connections by 10ft

Your price
€4.99 EUR

In stock: 139

Where to buy StarTech.com products

Drivers/Downloads

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Datasheet

Product Support

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Frequently Asked Questions

Installation

This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).

Troubleshooting

  1. If using a display with VGA input, use the On-Screen Display menu to perform an auto-adjust of the image.
  2. Adjust the resolution to be the exact resolution and refresh rate recommended by the display manufacturer.

Check that the device is not being used in reverse.

The display does not support the resolution set within Display Settings. Adjust the resolution to be the exact resolution and refresh rate recommended by the display manufacturer.

When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

This is likely a High-bandwidth Digital Content Protection (HDCP) issue. If you are converting a video signal from a device that can play copyright-protected content, HDCP will block the conversion to an analog signal (for example, VGA) or to any video capture cards.

You will likely run into this issue when you use devices like Blu-ray players, DVD players, and certain gaming consoles. For more information on HDCP and gaming consoles, refer to the following FAQ: https://www.startech.com/faq/video_capture_cards_video_game_console_compatibility.

Some video cards also output an HDCP signal full time. In this case there should be an option for your video card to disable this feature. You might need to contact the manufacturer of your video card for more information.

Adhering to HDCP is required for converting all digital signals to analog signals or to video capture cards. Unfortunately, there is nothing you can do in these situations other than convert to a digital display.

How To

To arrange extended displays on Windows 10, complete the following. 

  1. Press the Windows key+R, type desk.cpl, and press Enter. 
  2. Under the ‘Multiple Displays’ selection, select ‘Extend Desktop To This Display.’  
  3. Press ‘Identify’ to determine what number each display is assigned to. 
  4. Drag and drop each display accordingly to the physical layout on your desk.  
  5. Click the Apply button. 

To arrange extended displays on macOS, complete the following. 

  1. Navigate to the Apple Menu > System Preferences, click Displays, then click Arrangement
  2. Make sure that the ‘Mirror Displays’ checkbox is not selected. 
  3. Click on each display to determine what number each display is assigned to. 
  4. Drag and drop each display accordingly to the physical layout on your desk.  

Before You Buy

Unfortunately no, this device has an intended source and an intended destination.  Refer to the title of the webpage for this order.

When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.

If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.

Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.

Passive Adapters

Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.

Active Adapters

Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.

If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.

Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters.  For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.

Surface Dock

If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).

Note: This issue does not apply to the Surface Pro 3 Docking Station.

The DisplayPort to VGA adapter only converts from DisplayPort to VGA, which means that the DisplayPort connection must be the source and the VGA connection must be the destination.

Note: DisplayPort to VGA adapters are active, and can be used with any version of DisplayPort.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
*Product appearance and specifications are subject to change without notice.

Customer Reviews

(0 reviews)
0 out of 5 stars
  • 5 (0)
  • 4 (0)
  • 3 (0)
  • 2 (0)
  • 1 (0)
Tell us what you think of this product.
Need a little help getting started?

Check out our review guidelines.

Feedback Back to top