Product ID: DVIVGAFMBK
In stock: 1828
The DVIVGAFMBK DVI-A to VGA Display Adapter (F/M) is used to convert a DVI male connector to a VGA male connector.
The DVI to VGA adapter is constructed of high quality materials, to ensure dependability, and is backed by StarTech.com's lifetime warranty.
Please Note: This product is intended for connections between DVI-I devices, passing an analog signal, to VGA devices. If your device uses a DVI-D connector, please refer StarTech.com's DVI to VGA Converter DVI2VGACON.
|Connector(s)||1 - Connector A||VGA (15 pin, High Density D-Sub)|
|1 - Connector B||DVI-I (29 pin)|
|Hardware||Active or Passive Adapter||Passive|
|Cable Jacket Material||PVC - Polyvinyl Chloride|
|Packaging Information||Package Height||1.6 cm [0.6 in]|
|Package Length||12.5 cm [4.9 in]|
|Shipping (Package) Weight||36.0 g [1.3 oz]|
|Package Width||9.0 cm [3.5 in]|
|Physical Characteristics||Weight of Product||34.0 g [1.2 oz]|
|Product Length||5.3 cm [2.1 in]|
|Product Width||4.1 cm [1.6 in]|
|Product Height||1.5 cm [0.6 in]|
|What's in the Box||1 - Included in Package||DVI to VGA Cable Adapter - Black - F/M|
This is a passive video signal converter.
A passive video signal converter changes the type of connection that is being used but does not change the signal that passes through the converter. Because the video signal is not modified, passive converters tend to be smaller, simpler, and less expensive than active video signal converters. Examples of passive converters include DVI-I to VGA, HDMI to DVI, and DisplayPort to Mini-DisplayPort converters.
An active video signal converter modifies both the type of connection that is being used and the signal that passes through the converter. Because this type of conversion can be complex, active converters tend to be larger than passive video signal converters and sometimes require additional power. Examples of active converters include DVI-D to VGA, HDMI to DisplayPort, and VGA to HDMI converters.
For more information about passive and active DisplayPort video signal converters, refer to the following FAQ: https://www.startech.com/faq/DisplayPort_Converter_DP_Multi_Mode.
For more information about which type of video signal converter you should use when you convert video signals with an MST hub, refer to the following FAQ: https://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.
Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types:
Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).
Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.
DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.