Product ID: MPO12PL1M
In stock: 8
This MPO/MTP fiber optic cable houses 12 fibers and lets you interface between different networking devices of varying speeds. For example, you can set up a one-to-one connection between two 40Gbps switches or servers. Alternatively, you can connect a 40Gbps switch and break out the 40Gbps into six duplex 10Gbps LC connections on a patch panel or network cassette, which then fans out to individual 10Gbps devices.
The MTP connector provides twelve times the density of an SC connector and saves circuit card and rack space. Plus, the push-and-pull tabs optimize accessibility, by letting you install or remove the connectors with one hand without using additional tools.
The MTP to MTP cable is housed in a plenum-rated jacket and is ideal for installations where CMP fire rating is required.
Each OM3 fiber cable has been individually tested for insertion loss and return loss. The full test report is included in each cable bag.
The MPO12PL1M from StarTech.com is backed by a lifetime warranty.
Warranty Information | Warranty | Lifetime |
---|---|---|
Connector(s) | 1 - Connector A | MPO/MTP |
1 - Connector B | MPO/MTP | |
Hardware | Fire Rating | CMP Rated (Plenum) |
Fiber Size | 50/125 | |
Cable Type | Straight-Through | |
Packaging Information | Shipping (Package) Weight | 28 g [1.0 oz] |
Package Length | 22 cm [8.7 in] | |
Package Width | 20 cm [7.9 in] | |
Package Height | 10 mm [0.4 in] | |
Performance | Fiber Classification | OM3 |
Type | Multi Mode | |
Physical Characteristics | Color | Aqua |
Cable Length | 100 cm [39.4 in] | |
Product Length | 100 cm [39.4 in] | |
Product Width | 14 mm [0.6 in] | |
Product Height | 7 mm [0.3 in] | |
Weight of Product | 16 g [0.6 oz] | |
What's in the Box | 1 - Included in Package | fiber optic cable |
We are always ready to assist you with any questions you may have.
Live Chat (opens in new window)We are always ready to assist you with any questions you may have.
Live Chat (opens in new window)UPC and APC are fiber connector types. UPC (Ultra Physical Contact) connectors have a fiber connector end face that has been polished to a dome-shape. APC (Angled Physical Contact) connectors have a fiber connector end face that has been polished at an eight degree angle. When building fiber solutions, be sure to avoid mixing UPC and APC connectors. UPC and APC cannot mate with one another because causes the fiber cores don’t touch. This can cause a degraded connection or none at all.
StarTech.com fiber products use UPC connectors.
Check out our review guidelines.