Product ID: PCI1PECPDV
The PCI1PECPDV PCI Dual Voltage EPP/ECP Parallel Adapter Card adds an IEEE 1284 port to your PC using either a PCI 5V or PCI-X 3.3v slot, with support for data transfer speeds of up to 1.5 Mbps – up to 3 times faster than built-in parallel ports.
The adapter card supports a broad range of operating systems including Windows®, DOS® and Linux® for easy installation into mixed environments. Plus, IRQ sharing and plug and play capabilities guarantee convenient, hassle-free connections to any parallel peripheral.
This PCI Parallel adapter card is a complete dual profile solution, providing both a standard bracket and a low profile/half-height bracket for adapting to slimline or small form-factor system applications.
Backed by a StarTech.com lifetime warranty and free lifetime technical support.
|Connector(s)||Connector Type(s)||1 - PCI / PCI-X (Universal 3.3 & 5V, 32-bit)|
|External Ports||1 - DB-25 (25 pin, D-Sub)|
|Bus Type||PCI / PCI-X (5 / 3.3V)|
|Card Type||Standard Profile (LP bracket incl.)|
|Port Style||Integrated on Card|
|Chipset ID||PLX/Oxford - OX16PCI952|
|Packaging Information||Package Length||14.8 cm [5.8 in]|
|Package Width||5.8 cm [2.3 in]|
|Package Height||195 mm [7.7 in]|
|Shipping (Package) Weight||0.1 kg [0.3 lb]|
|Performance||Maximum Data Transfer Rate||1.5 Mbps|
|Physical Characteristics||Product Length||12 cm [4.7 in]|
|Product Width||20 mm [0.8 in]|
|Product Height||12 cm [4.7 in]|
|Weight of Product||60 g [2.1 oz]|
|Software||OS Compatibility||Windows® 8 (32/64), 7 (32/64), Vista (32/64), XP (32/64), 2000, ME, 98SE, 95
Windows Server® 2012, 2008 R2
Linux 2.4.x and up
|What's in the Box||Included in Package||1 - PCI Parallel Card|
|1 - Low Profile Bracket|
|1 - Driver CD|
|1 - Instruction Manual|
Convert a DB9 male port to a DB25 female port
In stock: 52
Convert a DB9 male port to a DB25 male port
In stock: 42
Transfer files via serial connection
In stock: 798
Transfer files via serial connection
In stock: 1260
To confirm that Windows detects your expansion card, complete the following:
Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
When you troubleshoot issues with a parallel device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the parallel cable, parallel port, and parallel device in another setup to see if the problem is with the components or the setup.
Use a different parallel cable, parallel port, and parallel device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the parallel ports and parallel device, it is recommended that you do the following:
Press the Windows key + R, type devmgmt.msc, and press Enter. Check to see if the parallel ports and parallel device is listed under Ports (COM & LPT).
Make sure that the LPT port number is the correct number for the parallel device and that the software being used to connect the computer to the parallel device uses the correct LPT port number.
If you do not see the LPT port number in Device Manager please see this FAQ for PCI/PCIe expansion cards: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#pci-pcie-cannot-boot-os-or-detect-windows
or this FAQ for USB devices: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#usb-cannot-detect-windows
If the device is listed with an error, follow the instructions on the website to reinstall the drivers.
Note: Some parallel devices only work if the LPT port number is between a certain range, usually LPT1 or LPT2.