Product ID: ST12MHDLAN4K
This HDMI® over IP extender gives you the flexibility to locate digital signage displays where you need them. Using your local network to extend a 4K HDMI signal, you can seamlessly distribute video to multiple displays from multiple source devices, making it easy to position your displays, or create a video wall.
You can add additional receivers (sold separately) to distribute your HDMI signal to multiple locations. You can also create a video wall and combine your video source across multiple displays.
The IP receiver also features RS-232 extension which enables you to add a remote serial-operated device.
In a point-to-multipoint setup, you can connect the HDMI over IP kit through a Gigabit LAN portal. You can also connect one or several sources (transmitters) to multiple displays (receivers) over your network, using a Gigabit Ethernet switch with IGMP.
For further scalability, you can combine up to 16 total extender kits. The extender also features a separate 3.5 mm audio source that enables you to switch between the native HDMI audio and a separate 3.5 mm audio source, so you can distribute a single audio source to multiple remote locations over IP.
For smaller-scale applications, you can use the extender kit as a point-to-point video extender by connecting the transmitter and receiver units directly over Cat5 or Cat6 cabling up to 330 feet (100 meters). In this configuration, two independent 3.5 mm audio source can also be extended to separate 3.5 mm speaker systems.
This HDMI over IP kit delivers astonishing 4K UHD video to your remote 4K displays. With support for 4K, you can achieve an output resolution of up to 3840 x 2160p at 30Hz, which enables you to extend a 4K video source to multiple remote locations -- perfect for distribution throughout large buildings such as schools, hospitals, shopping centers or areas. The extender also works at lower resolutions such as 1080p or 720p.
This HDMI distribution kit features an easy-to-use video control software app to manage your IP video distribution. The app is simple to set up, with automatic hardware detection, and lets you switch video sources for each remote display. You can also create and manage a video wall, for an impressive digital signage presentation.
The software is available on iOS for your iPhone or iPad, Android™ for your smartphone or tablet, and Google Chrome™ browser.
The HDMI over IP extender kit includes optional slot shelf mounting hardware for a tidy installation. Plus, because the extender uses standard non-proprietary CAT5e or CAT6 cable, it eliminates both the expense and hassle of running specialized cables.
Download the StarTech.com Video Control software.
Note: For best performance, a managed network switch with IGMP is recommended for more than one transmitter, or more than four receivers, Non-managed network switches will also limit the performance of other devices on your network. Support for Jumboframes must be enabled to distribute 4K video.
The ST12MHDLAN4K is This product is TAA compliant and backed by a Startech.com 2-year warranty with free lifetime technical support.
|Warranty Information||Warranty||2 Years|
|Connector(s)||1 - Connector A||HDMI (19 pin)|
|1 - Connector B||HDMI (19 pin)|
|1 - Connector A||RJ-45|
|1 - Connector B||RJ-45|
|2 - Connector A||RJ-11|
|2 - Connector B||RJ-11|
|4 - Connector A||3.5 mm Mini-Jack (3 Position)|
|4 - Connector B||3.5 mm Mini-Jack (3 Position)|
|Environmental||Operating Temperature||0°C to 40°C (32°F to 104°F)|
|Storage Temperature||-10°C to 60°C (14°F to 140°F)|
|Humidity||0% - 80 %|
|Cabling||Cat 5e UTP or better|
|Indicators||1 - LED Indicators||Link OK / POWER - Transmitter|
|Reset - Transmitter|
|Link OK / POWER - Receiver|
|Reset - Receiver|
|Packaging Information||Shipping (Package) Weight||5,1 lb [2,3 kg]|
|Package Length||14,6 in [37 cm]|
|Package Width||9,3 in [23,5 cm]|
|Package Height||3,0 in [76 mm]|
|Performance||Max Distance||100 m / 330 ft|
|Maximum Digital Resolutions||4K @ 30Hz|
|Supported Resolutions||3840x2160 (4K) @ 30Hz
1920x1200 @ 60Hz
|Wide Screen Supported||Yes|
|Audio Specifications||Stereo Sound|
|Product Length||5,1 in [13 cm]|
|Product Width||4,6 in [11,7 cm]|
|Product Height||1,2 in [30 mm]|
|Weight of Product||20,9 oz [592 g]|
|Power||Power Source||AC Adapter Included|
|Input Voltage||100 - 240 AC|
|Input Current||0.6 A|
|Output Voltage||12V DC|
|Output Current||1.5 A|
|Center Tip Polarity||Positive|
|Power Consumption (In Watts)||18|
|Special Notes / Requirements||Note||The ST12MHDLAN4K will only work with ST12MHDLAN4R receivers|
|Bandwidth requirement at 4k 30hz resolution is between 480Mbps and 850Mbps (per transmitter and receiver pair)|
|Latency at 4K 30hz resolution is 200ms between transmitter and receiver|
|What's in the Box||1 - Included in Package||HDMI over IP transmitter|
|HDMI over IP receiver|
|2 - Included in Package||universal power adapters (NA, EU, UK, ANZ)|
|RJ11 to RS232 adapters|
|1 - Included in Package||plastic screwdriver|
Use this 4K receiver with your HDMI extender over IP kit (ST12MHDLAN4K) to scale the extender to additional displays for your video wall or other digital signage applications
Easily connect an iPod or other MP3 player to your stereo
Connect your Computer or Audio Player to an RCA Audio Device
Connect your computer or audio player to an RCA audio device
There are a few things you'll want to take care of before you deploy your new video extender in your setup.
It’s important to make sure you have everything you will need ahead of time. These items are listed below.
It’s also important to test everything in a simplified setup ahead of time to make sure everything works and that you understand how it works.
In order to set up your video extender, complete the following:
Note: Not all video extenders require external power, or require external power on both ends. Refer to the manual for more information.
Now that you have set up your video extender, you can check that everything is working. You should be able to see your video source's output on the display connected to the video receiver.
If at this point you have further questions regarding a Startech.com video extender, contact our technical support team for further assistance.
To get the highest quality signal from your source to your display when you use an HDMI extender, do the following:
Make sure that the HDMI versions of the source, extender, and destination are compatible. For example, if you require 3D support, make sure that all of the devices can support 3D over HDMI.
Use the least amount of adapters, splitters, or converters as possible. Each device that you use in your setup creates additional points of potential failure and creates more steps for an HDCP key to hop through, which may cause issues with older displays. For more information on HDCP, refer to the following FAQ: http://www.startech.com/faq/video_signal_converters_HDCP.
Use an HDMI extender that exceeds the requirements of the setup. For example, if you need to extend the signal 200 feet, it is best to use an extender capable of more than 200 feet.
Make sure that all of the CAT 5/6 runs are as straight as possible, with the least amount of coiling.
Make sure that all of the patches, wall jacks, and cables use the highest possible CAT specification, (for example, CAT 6), and were tested to conform to the standard.
Use patches, wall jacks, and cables with the same pin configuration. For more information on T568A versus T568B wiring, refer to the following FAQ: http://www.startech.com/faq/network_cables_a_vs_b_pinout.
Keep the cabling away from sources of high noise.
Make sure that you use adequate electrical grounding in your setup.
When you troubleshoot issues with a video extender, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Video and Ethernet cables
Video source (such as a DVD player or computer)
Video destination (such as a monitor or projector)
Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI extender, you should use an HDMI source when you test the components.
To test your setup components, try the following:
Use the cable, video extender, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different cable, video extender, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
Remove the video extender from your setup and test to make sure that the video source and video destination work together without the video extender.
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, extender, and destination all need to support the resolution that you are using.
The ST12MHDLAN app is available for iOS, Android, and Google Chrome. To download and install the app navigate to the StarTech.com website. You will find a download link for each platform on the ST12MHDLAN product page under the Overview tab. The device on which you install the application will be referred to as the control device.
The control device must be on the same network as your ST12MHDLAN transmitters and receivers. The transmitters and receivers have a default IP address in the range of 169.254.x.x with a subnet mask of 255.255.0.0. If you need to change the IP address to fit your network infrastructure, make sure you keep all devices on the same network. For example, you can change your transmitter to 192.168.1.100 and your receiver to 192.168.1.101. There are links in the description to assist you in changing your control device's IP address.
The app will automatically discover any transmitters and receivers that are on the same network as the control device. These devices will be shown in the Devices tab.
You can manually force the control device to search for any transmitters and receivers by pressing the Refresh button in the Devices tab.
You can access the Menu from any tab within the app.
The menu includes a helpful guide to the app as well as the ability to search a specific IP address for a transmitter or receiver. The Menu also allows you to turn on Demo Mode which populates the app with virtual devices, allowing you to test configurations as if actual devices were connected.
The Menu also includes Device Administration which you can use to reboot all of your connected devices or reset the connected devices to factory defaults.
On the Devices tab you can adjust the individual settings for each transmitter and receiver. Simply tap on a device’s name to load that device’s settings. On the Settings page you can change the name of the device, the IP address and subnet, view error history, and other advanced settings.
The second tab of the ST12MHDLAN app is the Switches tab. This tab allows you to define which video source is being sent to each video receiver. You can change the video source quickly and easily by selecting a different source in this tab.
The final tab in the ST12MHDLAN app is titled Walls and allows you to customize your video walls and digital signage.
To create a new video wall, complete the following:
a)Tap Bezel Compensation.
b)Measure your display with and without the bezel, and enter the measurements as indicated in the diagram above.
As you add more video walls to the Walls tab you can easily modify or delete them by tapping on each entry.
You can manage your video wall in one of two ways:
If at this point you have questions about the ST12MHDLAN review the other videos in this series. If you would like to learn more about video extenders in general review our video series on that subject.
This device supports up to 4Kx2K resolutions @30 Hz with a color depth of 8 bits. If you are running a 4K resolution at a refresh rate higher than 30 Hz or a color depth higher than 8 bits, your display will appear blank.
To resolve this issue, you need to lower the resolution, refresh rate, or color depth, by completing any of the following:
Note: Depending on the type of smartphone you are using and the version of the Android OS you are running, the text you see in step 4 might differ from Manage network settings.
To change your IP address so that you can access a specific device, complete steps 1 to 6, then tap DHCP to access the Internet again.
Note: If you are changing your IP address to access a specific device, repeat steps 1 to 3, and then click the DHCP tab to access the Internet again.
You should only use video converters and extenders if it is absolutely necessary to do so. In many cases, most video converters and extenders are not necessary if you purchase the correct cable.
The following table lists the maximum length of cable for common video standards.
|Video standard||Maximum length|
|DisplayPort||50 ft. (15.2m)|
|HDMI||50 ft. (15.2m)|
|DVI||50 ft. (15.2m)|
|VGA||200 ft. (71m)|
Note: StarTech.com offers cables longer than what is listed above, including active cables, which typically include built-in active signal boosters that allow for longer cables. Active cables are specifically designed to exceed the suggested maximum lengths and are tested at the listed specifications (for example, the maximum listed resolution).
Video adapters passively adapt a cable from one connector type to another. Video adapters do not change the signal type, or change the video standard.
Examples of common applications for adapters include the following:
DVI-I to VGA
RCA to BNC
Mini DisplayPort to DisplayPort
Couplers (female to female, or male to male)
Note: You can use a coupler to extend a cable for a short distance. However, each coupler that you use can introduce signal loss, which degrades the signal quality.
Video converters actively process and change the signal type from one video standard and convert it to another standard. They are typically used to convert digital to analog and vice versa, but can be used to convert a digital signal to another digital video standard (for example, HDMI to DisplayPort).
Video converters work over short distances from the source to the destination: up to 15 feet or 3 meters.
Video extenders convert an input signal to a higher voltage for transmission over longer distances and then convert the input signal back to the original video standard. The input and the output signal will match on a video extender, as the same video standard is maintained end-to-end. If a cable is extended with adapters or converters, the signal quality degrades.
Note: For more information on using a video adapter or converter with a video extender, see the following FAQ: http://www.startech.com/faq/video_signal_converters_convert_then_extend.
If you need to use a video extender with a video adapter or converter, you should position the adapter or converter as close to the video source as possible. For example, if you need to take a VGA signal from a computer and send it 200 feet to an HDMI® projector, you should convert the signal from VGA to HDMI and use an HDMI extender.
Note: For more information on when to use cables or extenders, see the following FAQ: http://www.startech.com/faq/video_signal_converters_when_to_convert.
StarTech.com offers HDMI over IP video extenders that let you extend HDMI signals over your network to create a video wall. They allow you to catch the attention of your audience with impressive digital signage. And with some of our video extenders, you can also extend USB.
This video extender works with a free mobile application that makes it easy to create and manage a video wall. The app is simple to set up with automatic hardware detection. It allows you to switch video sources for each remote display and manage your video distribution. The software is available on iOS, Android, and Google Chrome.
Video over IP devices extend video and audio differently than point-to-point video extenders. Point-to-point video extenders transmit your video and audio wirelessly or using cables separate from your network. Video over IP devices convert your video and audio to IP packets so that the data can be transferred over your existing network. This allows you to take advantage of your network infrastructure, and allows for greater control and scalability.
The maximum distance you can transmit is determined by your network infrastructure. Transmitters and receivers can be up to 100m apart from a network switch or router. The ST12MHDLAN allows for a maximum of 16 transmitters, depending on your network’s bandwidth. The maximum number of receivers depends on your network’s bandwidth.
Video signals sent through the video extender consume bandwidth on your network. To calculate the average bandwidth for a 1080p 60Hz video, use the following equation. Add the number of transmitters to the number of receivers, then multiply the result by 45 Mbps. For example, when you use one transmitter and four receivers, the average bandwidth is 225Mbps. For best performance, make sure that your hardware supports more bandwidth than is required. StarTech.com recommends at least a Gigabit network for use with the ST12MHDLAN.
The ST12MHDLAN requires that the transmitters and receivers are connected to a switch or router that supports Internet Group Management Protocol or IGMP. IGMP allows devices on the same network to communicate more efficiently. IGMP support can be confirmed with your hardware manufacturer.
If at this point you have questions about the ST12MHDLAN review the other videos in this series which will include installation, use of the software, and general troubleshooting. If you would like to learn more about video extenders in general review our video series on that subject.
Yes, this video extender works with set-top boxes, provided the set-top box meets the following requirements:
Internet Group Management Protocol (IGMP) is a communications protocol used by hosts and routers. With IGMP, specific network devices are identified to receive network traffic, as opposed to network traffic being sent to every device connected to the network.
IGMP is required for this product because the total amount of network traffic across the network needs to be reduced to avoid impacting the other connected devices. Without IGMP, the video extender would send the video signal to each of the devices on your network.
Due to a wide variety of network factors, video latency cannot be accurately predicted.
This device outputs HDMI video signals. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.
When you consider whether to convert an HDMI video signal to another connection type, it is important to know if the media that is being converted from the HDMI video connection is protected by High-bandwidth Digital Content Protection (HDCP). If the media is protected by HDCP, you cannot convert to analog video connections because they do not support HDCP. You may experience this issue when you use devices like Blu-ray players, DVD players, and certain gaming consoles.
|VGA||HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA.|
|DisplayPort||HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.|
This device has an HDMI input port. If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.
DVI to HDMI video converters: https://www.startech.com/Cables/Audio-Video/Video-Adapter/HDMI-Cable-Adapters/.
DVI to HDMI video cables: https://www.startech.com/Cables/Audio-Video/HDMI/HDMI-to-DVI/.
DisplayPort to HDMI passive converters: https://www.startech.com/AV/Displayport-Converters/DP-HDMI/?filter_CONVERTTYPE=Passive.
DisplayPort to HDMI active converters: https://www.startech.com/AV/Displayport-Converters/DP-HDMI/?filter_CONVERTTYPE=Active.
The converter that you require depends on the type of DisplayPort video source that you are using. For more information about converting DisplayPort video signals, refer to the following FAQ: https://www.startech.com/faq/DisplayPort_Converter_DP_Multi_Mode.
Check out our review guidelines.