Industrial 8 Port Gigabit PoE+ Switch w/2 SFP MSA Slots - 30W - Layer/L2 Switch Hardened GbE Managed - Rugged High Power Gigabit Ethernet Network Switch IP-30/-40 C to 75 C

Add up to 10 different GbE devices to your network, using 8 RJ45 (PoE+) and 2 fiber-optic connections, with intelligent Layer 2 management

Product ID: IES101GP2SFW

2.3 stars (3 reviews) |
  • POWER OVER ETHERNET: Industrial 8 Port Gigabit PoE+ Switch w/2 SFP Ports; 30W per 4 PoE ports to IEEE 802.3af & IEEE 802.3at for cameras, sensors etc. w/Cat5e or higher cable Total power budget 200W
  • FLAT DESIGN: Compact housing allows for front access and easy installation and troubleshooting; DIN rail or wall mounting options available as all hardware is included
  • FULL LAYER 2 MANAGEMENT CAPABILITIES: Through built in web-based GUI/Telnet/SSH; Switch can be managed to configure features like Ports/VLAN/Link Aggregation/SNMP/QoS/Spanning Tree among others
Your price
¥59,477 JPY excl.
¥65,425 JPY incl.

Easily deploy or scale your network with this Gigabit Ethernet switch, by adding eight copper Gigabit Ethernet ports (PoE+) and two fiber-optic SFP slots. This IP30 industrial network switch provides intelligent Layer 2 management. Its rugged, compact design and wall-mount option with front access make it ideal for demanding applications, even where space is limited.

Expand your network

This versatile switch adapts to your network needs by providing two open SFP slots and eight RJ45 Ethernet ports (PoE+), providing both fiber and copper connections in a single network device.  The MSA compliant SFP ports are compatible with 100/1000Mbps networks. The network switch enables you to connect up to eight RJ45 PoE+ devices, so different users can share files and devices, such as printers and scanners, over a LAN connection.

Supports PoE+ for flexible use

Dual power input (terminal block and DC plug) provides flexible power options. The switch gives you the freedom to place your equipment in locations where power outlets are not available, with support for Power over Ethernet Plus. The network switch provides abundant PoE power, with up to 30 watts for each PoE port (200W budget).

Wall-mountable with front access

Wall-mount the compact Gigabit switch to provide convenient front access to ports and indicators. It’s ideal for a wide range of applications, including tight installation areas with significant electromagnetic interference, such as control cabinets and panels. The network switch is also DIN-rail mountable.

Efficient Layer 2 management

The switch delivers efficient and stable performance, with Layer 2 management capabilities. This lets you control packet traffic on a busy network, and customize your settings to achieve optimal network performance, offering improved efficiency and reliability.

Rugged IP30 industrial design

This rugged network switch features an IP30-rated metal housing and extended temperature range of -40°C to 75°C, which makes it ideal for a wide range of operating conditions. The sturdy metal enclosure offers durability, even in harsh industrial environments.

Reliable connection for seamless network performance

With support for 10/100/1000Mbps transfer speeds, this managed switch supports full/half-duplex auto-negotiation, jumbo frames and auto MDI/MDIX operation. This lets you connect your network devices quickly and easily, with little to no configuration required.

The IES101GP2SFW is backed by a 2-year warranty and free lifetime technical support.


  • Install in a server rack or cabinet, or wall mount in a convenient location
  • An ideal solution for many network applications including IP surveillance, wireless LAN, building/home automation network and Internet of things (IoT)
  • Add small workgroups to expand your existing network in a business or home office
  • Works well in industrial, non-climate controlled environments, such as warehouses

Partner Numbers

  • SB C&S S6A1010670
  • SYNNEX Japan ZU201H9
  • UPC 065030871198


Warranty Information Warranty 2 Years
Connector(s) 8 - Connector Type(s) RJ-45 (PoE+)
2 - Connector Type(s) SFP Slot
1 - Connector Type(s) Terminal Block (3 Wire)
Environmental Operating Temperature -40°C to 75°C (-40°F to 167°F)
Storage Temperature -40°C to 90°C (-40°F to 194°F)
Humidity 5~95% RH (Non-Condensing)
Hardware Ports 10
Interface RJ45 (Gigabit Ethernet)
Fiber Ethernet
Industry Standards IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T
IEEE 802.3z 1000Base-SX/LX
IEEE 802.3az Energy-Efficient Ethernet, IEEE 802.3x Flow Control, IEEE 802.1q VLAN Tagging, IEEE 802.1p QoS, IEEE 802.1x Port-Based Network Access Control, IEEE802.3ad Link Aggregation, IEEE 802.1d Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree Protocol
Indicators 1 - LED Indicators Power
8 - LED Indicators PoE Active (yellow)
Link/Activity (green)
2 - LED Indicators 100Mbps Link/Activity (yellow)
1000Mbps Link/Activity (green)
Packaging Information Shipping (Package) Weight 0.9 kg [2.1 lb]
Package Length 30 cm [11.8 in]
Package Width 17 cm [6.7 in]
Package Height 90 mm [3.5 in]
Performance Maximum Data Transfer Rate 2 Gbps (Full-Duplex)
Maximum Cable Length 100 m [328.0 ft]
Buffer Size 512 KB
Flow Control IEEE 802.3x pause frame for full-duplex, back pressure for half-duplex
Surge Protection 6kV ESD, 6kV EFT
Compatible Networks 10/100/1000 Mbps
Auto MDIX Yes
Full Duplex Support Yes
Jumbo Frame Support 9K max.
Switching Architecture Store-and-Forward
MTBF > 100,000 hrs @ 25 degrees C
Supported Protocols IEEE 802.3ad Port Trunk with LACP, IEEE 802.1D Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree Protocol, IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1p Class of Service, RFC 3810 MLD version 2, RFC 792 ICMP, RFC 2068 HTTP, RFC 1112 IGMP version 1, RFC 2236 IGMP version 2, RFC 3376 IGMP version 3, RFC 2710 MLD version 1, IEEE 802.1Q VLAN Tagging, IEEE 802.1x Port Authentication Network Control, bIEEE 802.1ab LLDP, RFC 768 UDP, RFC 793 TFTP, RFC 791 IP
Physical Characteristics Color Black
Material Steel
Product Length 13.4 cm [5.3 in]
Product Width 17.8 cm [7.0 in]
Product Height 2.5 cm [1.0 in]
Weight of Product 618 g [21.8 oz]
Power Power Source Terminal Block
Input Voltage 48 ~ 56V DC
Input Current 1A minimum
Plug Type M
Special Notes / Requirements Patents and Licenses The following patents are licensed for this product. This list might not be all inclusive.
• United States Patent No. 5,406,260 (expired)
• United States Patent No. 6,650,622
• United States Patent No. 7,457,250
• United States Patent No. 8,155,012
• United States Patent No. 8,902,760
• United States Patent No. 8,942,107
• United States Patent No. 9,019,838
• United States Patent No. 9,049,019
• United States Patent Application No. 14/695,456
• United States Patent Application No. 14/726,940
Note 8 ports support IEEE 802.3at Power over Ethernet Plus (PoE+) and IEEE 802.3af Power over Ethernet (PoE)
Supports PoE Powered Device alive check, scheduled power recycling, and time-based PoE schedule
PoE power up to 30W per PoE+ port (200W budget) and remote PoE power control
A power adapter is not included with this switch.
What's in the Box 1 - Included in Package network switch
terminal block connector
DIN rail
quick-start guide
4 - Included in Package screw anchors
attaching pins
locking pins
3 - Included in Package DIN-rail screws
8 - Included in Package RJ45 dust caps
2 - Included in Package SFP dust caps


Your price
¥8,046 JPY excl.
¥8,851 JPY incl.
Your price
¥8,917 JPY excl.
¥9,809 JPY incl.
Your price
¥6,603 JPY excl.
¥7,263 JPY incl.


Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)




Product Support

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Frequently Asked Questions


This device's default static IP address is

  1. Make sure that the IES101GP2SFW is on the same network as your computer.
  2. In an Internet browser, enter the IP address of the unit. The default IP address is
  3. In the user name field, enter the user name. The default user name is admin.
  4. In the password field, enter the password. The default password is admin.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
*Product appearance and specifications are subject to change without notice.

Customer Reviews

(3 reviews)
2.3 out of 5 stars
  • 5 (1)
  • 4 (0)
  • 3 (0)
  • 2 (0)
  • 1 (2)
Tell us what you think of this product.
Need a little help getting started?

Check out our review guidelines.

1 - 3 of 3 Reviews
(1 Stars)

Product ships with no power supply

By: CDR2222 - 03/01/2018
We bought this switch for one of our Customers. When we went to install, we noticed that there was no power supply included. We called Startech who informed us that we would have to get a power supply from a 3rd party and did not have any specific recommendations. This ended up delaying our project and we ended up getting a different network switch that included a power supply. For 20+ years purchasing network switches, I have never come across a product that did not ship with a power supply. To this date we still have no power supply for this switch and it is basically just sitting on the shelf.
| Helpful?
Brian, Customer Support on 3/3/2018 12:54:33 PM
Thanks for sharing your feedback with us. We sincerely apologize for the confusion surrounding how to power this network switch. This model is designed for industrial settings with terminal block power available. As a result, we do not include a power adapter with the product. It can also be powered by a 48V DC power adapter that supplies 1 to 5A of current. This type of power adapter can be purchased online or from many electronics stores. We hope this helps.
(5 Stars)

been reliable as a rock

By: homelabs - 09/01/2019
bought this a year ago now for use at home. been running almost 24/7 and not had a single issue with it. The only additional thing I would recommend is that the Web Interface is brought up to date a little more as it currently looks a little dated.
| Helpful?
(1 Stars)

Lead AV

By: Trenton777 - 04/10/2020
no power supply included. startech does not make a power supply that works with this unit. their advice "look at the specs and go find one from a third party" Don't buy this unless you want a headache too.
| Helpful?
Matt, Customer Support on 4/17/2020 4:27:34 PM
We always try to ensure our customers have exceptional experiences with us and our products and we apologize for any confusion when purchasing our IES101GP2SFW. This switch does not come with a power adapter as it is designed to be used with Terminal Block power, but also because there are a wide range of power requirements for different users and it would raise the cost far more if we were to include a power adapter that provided the full 200W that the switch is able to provide than if you are to purchase a power adapter separately that only provides the amount of power that you need to use as many customers may only be providing power to 2-4 of the ports. The switch supports a 48-56V power adapter and as long as you know the wattage required by all of your devices, you should be able to find a third-party power supply that fits within that voltage range. However, if you require assistance verifying the specifics of the power supply you need we'd be happy to help calculate this for you. Our Technical Advisors are available 24 hours a day, 5 days a week at
Back to top