Niet meer leverbaar

VGA UTP Video Verlenger Repeater via Cat5

Voeg 1 of 2 schermen toe aan uw VGA via CAT5 verlenging

Productcode: ST121EXTEU

  • Fungeert als repeater en voegt 250 meter toe aan de totale verlenging die er met de ST121UTPEU en ST1214TEU kan worden bereikt
  • Verlengt het videosignaal met maximaal 150 m
  • Maakt extra schermlocaties mogelijk op basis van bestaande Cat5-bekabeling

Met de ST121EXTEU VGA via Cat5 UTP Video Verlenger Repeater kunt u uw VGA-signaal verlengen via Cat5-bekabeling of beter. Dit apparaat is speciaal ontworpen voor gebruik met het ST121 VGA Video via Cat5 verlengsysteem van StarTech.com, dat bestaat uit een zender (ST1214TEU of ST121UTPEU) en een ST121REU ontvanger.

De ST121EXTEU VGA Verlenger Repeater verlengt de bereikbare afstand tussen zender en ontvanger naar in totaal 300 meter en beschikt bovendien over een VGA-uitgang, zodat u ook in het midden tussen de zender en de ontvanger nog een scherm kunt aansluiten.

Voor nog meer veelzijdigheid kunnen er maximaal drie ST121EXTEU repeaters worden gebruikt tussen de zender en de ontvanger, zodat er niet alleen bij elke repeater monitoren kunnen worden aangesloten, maar ook de totale afstand nog verder wordt verlengd met 150 meter per gebruikte repeater.

Met 2-jaar garantie en gratis levenslange technische ondersteuning door StarTech.com

Toepassingen

  • Plaats de weergaveapparatuur op een toepasselijke locatie, terwijl het systeem zelf in een schone en veilige omgeving wordt geplaatst
  • Ideaal voor narrowcasting-toepassingen in het onderwijs en de financiële en zakelijke sector
  • Verleng uw beeldscherm in ruwe industriële locaties
  • Ideaal voor videoconferencing bij vergaderingen en in kantoren
  • Kies een optimale locatie voor uw demonstratie op beurzen en in conferentiezalen

Het voordeel van StarTech.com

  • Verlenging via Cat5 stelt u in staat gebruik te maken van bestaande infrastructuur met Cat5-bekabeling of beter
  • Verlengt de afstand voor het aansluiten van VGA-beeldschermen met maximaal 150 meter voor de nodige flexibiliteit bij de plaatsing van uw apparatuur

Partnernummers

  • UPC 065030840552

Specificaties

Warranty Information Warranty 2 Years
Connector(en) 2 - Aansluitingen externe eenheid RJ-45
VGA (15-polig, D-Sub met hoge dichtheid)
Fysieke eigenschappen Kleur Zwart
Type behuizing Aluminium
Lengte product 10,3 cm [4,1 in]
Breedte product 64,0 mm [2,5 in]
Hoogte product 20,6 mm [0,8 in]
Gewicht product 204 g [7,2 oz]
Hardware Poorten 1
Bekabeling Cat5 UTP
Op elkaar aansluitbaar Ja
Prestaties Maximale kabellengte 152,4 m [500,0 ft]
Max. afstand 150 m / 500 ft
Maximale analoge resoluties 1024 x 768 @ 500 feet (150m)
Verpakkingsinformatie Package Length 22 cm [8,7 in]
Package Width 10,4 cm [4,1 in]
Package Height 98 mm [3,9 in]
Verzendgewicht (verpakt) 630,0 g [22,2 oz]
Voeding Inclusief voedingsadapter Inclusief wisselstroomadapter
Ingangsspanning 230 AC
Uitgangsspanning 9V DC
Uitgangsstroom 0.6A
Polariteit pin midden Positief
Stekkertype M
Wat wordt er meegeleverd 1 - Meegeleverd EXTERNE EENHEID VGA VERLENGER
9V AC 500mA ADAPTERS
Handleiding

Accessoires

Niet meer leverbaar
ST121REU

VGA via Cat5 Video Verlenger Ontvanger

Ontvang en zend een VGA-verlengsignaal vanaf een video-extender uit de ST121-serie

Uw prijs
€116,99 EUR excl. BTW
€141,56 EUR incl. BTW
SVA9M2NEUA

DC voedingsadapter - 9V, 2A

Vervang uw zoekgeraakte of defecte voedingsadapter

Uw prijs
€21,99 EUR excl. BTW
€26,61 EUR incl. BTW

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

There are a few things you'll want to take care of before you deploy your new video extender in your setup.

It’s important to make sure you have everything you will need ahead of time. These items are listed below.

  • Transmitter
  • Receiver
  • Video source
  • Display
  • Video cables
  • (Optional) Ethernet or fiber cables
  • (Optional) Power adapter(s)

It’s also important to test everything in a simplified setup ahead of time to make sure everything works and that you understand how it works. 

In order to set up your video extender, complete the following:

  1. Position your video transmitter near your video source.
  2. Connect the video output from your video source to the video transmitter.
  3. (Optional) Connect the power adapter to the video transmitter.

Note: Not all video extenders require external power, or require external power on both ends.  Refer to the manual for more information.

  1. Position your video receiver near your display.
  2. Connect the video output from your video receiver to your display.
  3. (Optional) Connect the power adapter to the video receiver.
  4. If using a wired video extender, connect your network cabling between the video transmitter and the video receiver.
  5. (Optional) If you are extending anything else supported by your video extender connect those devices to the transmitter and receiver.
  6. (Optional) If you are using a wireless extender, there may be a sync button you need to press to pair the transmitter and receiver.

Now that you have set up your video extender, you can check that everything is working.  You should be able to see your video source's output on the display connected to the video receiver.

If at this point you have further questions regarding a Startech.com video extender, contact our technical support team for further assistance. 

Voor uw aanschaf

You should only use video converters and extenders if it is absolutely necessary to do so. In many cases, most video converters and extenders are not necessary if you purchase the correct cable.

The following table lists the maximum length of cable for common video standards.

Video standard Maximum length
DisplayPort 50 ft. (15.2m)
HDMI 50 ft. (15.2m)
DVI 50 ft. (15.2m)
VGA 200 ft. (71m)

Note: StarTech.com offers cables longer than what is listed above, including active cables, which typically include built-in active signal boosters that allow for longer cables. Active cables are specifically designed to exceed the suggested maximum lengths and are tested at the listed specifications (for example, the maximum listed resolution).

Video adapters

Video adapters passively adapt a cable from one connector type to another. Video adapters do not change the signal type, or change the video standard.

Examples of common applications for adapters include the following:

  • DVI-I to VGA

  • RCA to BNC

  • Mini DisplayPort to DisplayPort

  • Couplers (female to female, or male to male)

Note: You can use a coupler to extend a cable for a short distance. However, each coupler that you use can introduce signal loss, which degrades the signal quality.

Video converters

Video converters actively process and change the signal type from one video standard and convert it to another standard. They are typically used to convert digital to analog and vice versa, but can be used to convert a digital signal to another digital video standard (for example, HDMI to DisplayPort).

Video converters work over short distances from the source to the destination: up to 15 feet or 3 meters.

Video extenders

Video extenders convert an input signal to a higher voltage for transmission over longer distances and then convert the input signal back to the original video standard. The input and the output signal will match on a video extender, as the same video standard is maintained end-to-end. If a cable is extended with adapters or converters, the signal quality degrades.

Note: For more information on using a video adapter or converter with a video extender, see the following FAQ: http://www.startech.com/faq/video_signal_converters_convert_then_extend.

If you need to use a video extender with a video adapter or converter, you should position the adapter or converter as close to the video source as possible. For example, if you need to take a VGA signal from a computer and send it 200 feet to an HDMI® projector, you should convert the signal from VGA to HDMI and use an HDMI extender.

Note: For more information on when to use cables or extenders, see the following FAQ: http://www.startech.com/faq/video_signal_converters_when_to_convert.

This device outputs a VGA signal. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.

Target connection First conversion Second conversion (if required)
DVI-D VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. HDMI to DVI-D: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.
DVI-I VGA to DVI-I: https://www.startech.com/Cables/Audio-Video/Video-Adapter/DVIVGA/. N/A
HDMI

VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.

N/A
DisplayPort VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.

Note: You might need to use more than one converter as part of your solution; however, you should try to use the least number of converters and cables to connect your source and destination. If you have the option to convert to multiple target video connections, choose the option that requires the fewest number of conversions.

DVI-I and DVI-D

When you convert from VGA to DVI, you need to know if you are converting to a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you need, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.

You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.  

Note: Certain devices may have a DVI-I connection but only support DVI-D signaling. It is important to verify that your DVI-I device supports DVI-I signaling.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven
Wacht...