4K HDMI extender met compacte transmitter - HDBaseT - UHD 4K

HDBaseT extender set | 7.1 audio | inclusief montage materiaal | tot 70 m

Productcode: ST121HDBTDK

  • Eenvoudige en veelzijdige installatie met een compacte, USB-gevoede zender met een geïntegreerde HDMI-kabel
  • Verbazingwekkende beeldkwaliteit met ondersteuning voor UHD-resoluties tot 4K
  • Eenvoudige integratie met bestaande CAT5 / CAT6 / CAT7-infrastructuur
Uw prijs
€502,99 EUR excl. BTW
€608,62 EUR incl. BTW

Deze 4K HDMI-extender maakt gebruik van HDBaseT om uw HDMI A/V-signaal naar een verder gelegen plaats verzenden die tot 70 m  verwijderd is.

Eenvoudige en nette installatie

De zender in deze HDMI HDBaseT-extenderset heeft een kleine footprint en een ingebouwde HDMI-kabel die rechtstreeks op uw bron wordt aangesloten voor minder rommel. Deze extenderset wordt gevoed via een USB-poort op uw bronapparaat, waardoor het gemakkelijker te installeren is in gebieden met een beperkt aantal stopcontacten. Voor de ontvanger is montagemateriaal inbegrepen voor een onopvallende, professionele installatie.

Ontvang 4K-video over 40 m afstand

Deze HDMI over CAT6-extender behoudt uw UHD 4K-beeldkwaliteit, zelfs op 70 meter afstand van uw videobron. Omdat de extender achterwaarts compatibel is met 1080p en lagere resoluties op 70 meter afstand, kunt u deze extender comfortabel gebruiken om elke videobron er fantastisch uit te laten zien. De extender ondersteunt ook 7.1-audio om ervoor te zorgen dat alle audiokanalen worden vastgelegd.

Naadloze integratie in uw bestaande infrastructuur

De kit breidt HDMI uit via een enkele kabel, in tegenstelling tot sommige HDMI-extenders die twee kabels nodig hebben, waardoor mogelijke faalpunten worden verminderd en uw bekabelingskosten worden verlaagd. De HDMI-over-CAT6-extender is ideaal voor digital signage en maakt gebruik van standaard CAT5e-, CAT6- of CAT7-kabels om HDMI-video uit te breiden via de Ethernet-infrastructuur die zich al in uw gebouw bevindt.

De ST121HDBTDK wordt gedekt door een 2-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.

Toepassingen

  • Verzend een HDBaseT-signaal naar een projector in een vergaderruimte of klaslokaal
  • Distribueer digital signage in grote gebouwen zoals winkelcentra, stadions, scholen en ziekenhuizen
  • Voorzie uw zender van stroom via de USB-poort van uw videobron

Partnernummers

  • Ingram Micro Netherlands 000000000003383765
  • Tech Data - Netherlands 4462440
  • UPC 065030864916

Specificaties

Warranty Information Warranty 2 Years
AV-ingang HDMI
AV-uitgang HDMI
1 - Connector A HDMI (19-polig)
1 - Connector B HDMI (19-polig)
1 - Connector A RJ-45
1 - Connector B RJ-45
Connector(en) 1 - Connectoren lokale eenheid HDMI (19-polig)
1 - Aansluitingen externe eenheid HDMI (19-polig)
1 - Connectoren lokale eenheid RJ-45
1 - Aansluitingen externe eenheid RJ-45
Fysieke eigenschappen Type behuizing Staal
Lengte product 80 mm [3.1 in]
Breedte product 68 mm [2.7 in]
Hoogte product 25 mm [1.0 in]
Gewicht product 252 g [8.9 oz]
Gebruiksomgeving Bedrijfstemperatuur 0°C to 40°C (32°F to 104°F)
Opslagtemperatuur -10°C to 60°C (14°F to 140°F)
Vochtigheid 0 - 80% rel. vochtigheid, niet-condenserend
Hardware Poorten 1
Bekabeling Cat5e UTP of beter
Audio Ja
Rack-monteerbaar Ja
Op elkaar aansluitbaar Nee
Indicatoren 1 - LED-indicatoren Status-LED (ontvanger)
Prestaties Max. afstand 70 m / 230 ft
Maximale digitale resoluties 4096 x 2160 (4K) @ 30 Hz
Ondersteuning breedbeeld: Ja
Audiospecificaties 7.1 surround sound
Verpakkingsinformatie Package Height 74 mm [2.9 in]
Package Length 29.3 cm [11.5 in]
Verzendgewicht (verpakt) 1.6 kg [3.5 lb]
Package Width 19.6 cm [7.7 in]
Voeding Inclusief voedingsadapter Inclusief wisselstroomadapter
Ingangsspanning 100 - 240 AC
Ingangsstroom 0.6 A
Uitgangsspanning 12V DC
Uitgangsstroom 1.5 A
Polariteit pin midden Positief
Stekkertype M
Vermogensopname 18
Wat wordt er meegeleverd 1 - Meegeleverd HDBaseT zender
HDBaseT ontvanger
USB-voedingskabel (zender) (1310 mm)
universele voedingsadapter (ontvanger) (NA, EU, GB, ANZ)
montageset (ontvanger)
schroevenset voor montage
set rubberen pootjes (ontvanger)
Verkorte handleiding

Accessoires

IM12D1500P

12V DC 1,5A Universele voedingsadapter

Vervang uw 12 V DC (1,5 A) voedingskabel door een betrouwbare verbinding

Uw prijs
€22,99 EUR excl. BTW
€27,82 EUR incl. BTW
HDMM6

1,8m High Speed HDMI-kabel – Ultra HD 4k x 2k HDMI-kabel – HDMI naar HDMI M/M

Maak Ultra HD-verbindingen tussen uw High Speed HDMI®-apparaten

Uw prijs
€10,99 EUR excl. BTW
€13,30 EUR incl. BTW
SVA12M2NEUA

DC power adapter - 12V, 2A - voedingsadapter

Vervang uw zoekgeraakte of defecte voedingsadapter

Uw prijs
€25,99 EUR excl. BTW
€31,45 EUR incl. BTW
SVA12M5NA

DC power adapter - 12V, 5A - voedingsadapter

Vervang uw zoekgeraakte of defecte voedingsadapter

Uw prijs
€65,99 EUR excl. BTW
€79,85 EUR incl. BTW

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

There are a few things you'll want to take care of before you deploy your new video extender in your setup.

It’s important to make sure you have everything you will need ahead of time. These items are listed below.

  • Transmitter
  • Receiver
  • Video source
  • Display
  • Video cables
  • (Optional) Ethernet or fiber cables
  • (Optional) Power adapter(s)

It’s also important to test everything in a simplified setup ahead of time to make sure everything works and that you understand how it works. 

In order to set up your video extender, complete the following:

  1. Position your video transmitter near your video source.
  2. Connect the video output from your video source to the video transmitter.
  3. (Optional) Connect the power adapter to the video transmitter.

Note: Not all video extenders require external power, or require external power on both ends.  Refer to the manual for more information.

  1. Position your video receiver near your display.
  2. Connect the video output from your video receiver to your display.
  3. (Optional) Connect the power adapter to the video receiver.
  4. If using a wired video extender, connect your network cabling between the video transmitter and the video receiver.
  5. (Optional) If you are extending anything else supported by your video extender connect those devices to the transmitter and receiver.
  6. (Optional) If you are using a wireless extender, there may be a sync button you need to press to pair the transmitter and receiver.

Now that you have set up your video extender, you can check that everything is working.  You should be able to see your video source's output on the display connected to the video receiver.

If at this point you have further questions regarding a Startech.com video extender, contact our technical support team for further assistance. 

To get the highest quality signal from your source to your display when you use an HDMI extender, do the following:

  • Make sure that the HDMI versions of the source, extender, and destination are compatible. For example, if you require 3D support, make sure that all of the devices can support 3D over HDMI.

  • Use the least amount of adapters, splitters, or converters as possible. Each device that you use in your setup creates additional points of potential failure and creates more steps for an HDCP key to hop through, which may cause issues with older displays. For more information on HDCP, refer to the following FAQ: http://www.startech.com/faq/video_signal_converters_HDCP.

  • Use an HDMI extender that exceeds the requirements of the setup. For example, if you need to extend the signal 200 feet, it is best to use an extender capable of more than 200 feet.

  • Make sure that all of the CAT 5/6 runs are as straight as possible, with the least amount of coiling.

  • Make sure that all of the patches, wall jacks, and cables use the highest possible CAT specification, (for example, CAT 6), and were tested to conform to the standard.

  • Use patches, wall jacks, and cables with the same pin configuration. For more information on T568A versus T568B wiring, refer to the following FAQ: http://www.startech.com/faq/network_cables_a_vs_b_pinout.

  • Keep the cabling away from sources of high noise.

  • Make sure that you use adequate electrical grounding in your setup.

Troubleshooting

When you troubleshoot issues with a video extender, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video and Ethernet cables

  • Video extender

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI extender, you should use an HDMI source when you test the components.

To test your setup components, try the following:

  • Use the cable, video extender, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video extender, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video extender from your setup and test to make sure that the video source and video destination work together without the video extender.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, extender, and destination all need to support the resolution that you are using.

This device supports up to 4Kx2K resolutions @30 Hz with a color depth of 8 bits. If you are running a 4K resolution at a refresh rate higher than 30 Hz or a color depth higher than 8 bits, your display will appear blank.

To resolve this issue, you need to lower the resolution, refresh rate, or color depth, by completing any of the following:

  • Connect a display to OUT 1 that is only capable of 4K at 30 Hz with a color depth no higher than 8 bits.  
  • Connect the least capable display to OUT 1.
  • Connect an additional display to your video source (for example, a video card in a computer) and use this display to reconfigure the display connected to OUT 1 to run at 30 Hz and 8 bits color depth (or lower).

Voor uw aanschaf

If you need to use a video extender with a video adapter or converter, you should position the adapter or converter as close to the video source as possible. For example, if you need to take a VGA signal from a computer and send it 200 feet to an HDMI® projector, you should convert the signal from VGA to HDMI and use an HDMI extender.

Note: For more information on when to use cables or extenders, see the following FAQ: http://www.startech.com/faq/video_signal_converters_when_to_convert.

Yes, this video extender works with set-top boxes, provided the set-top box meets the following requirements:

  • The set-top box must be High-bandwidth Digital Content Protection (HDCP) compliant.
  • The set-top box must support devices being connected between the video source and display. If the set-top box requires a direct cable connection between the video source and display, it won't work with this video extender.

No, this device is designed to be a point-to-point solution using networking cabling only. 

This device outputs HDMI video signals. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.

HDCP

When you consider whether to convert an HDMI video signal to another connection type, it is important to know if the media that is being converted from the HDMI video connection is protected by High-bandwidth Digital Content Protection (HDCP). If the media is protected by HDCP, you cannot convert to analog video connections because they do not support HDCP. You may experience this issue when you use devices like Blu-ray players, DVD players, and certain gaming consoles.

Target connection Conversion
VGA HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA.
DVI

HDMI to DVI: https://www.startech.com/Cables/Audio-Video/HDMI/HDMI-to-DVI/.

DisplayPort HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.

 

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven
Wacht...