Niet meer leverbaar

HDMI Over Single Cat 5e/6 extender met Power Over Cable, Ethernet en IR - 100 m

Verleng HDMI®, IR en Ethernet tot 100 m over CAT5e/6 met Power over kabel naar ontvanger

Productcode: ST121HDT4P

  • Power Over Cable, kan dienen als één voeding voor de zender en ontvanger
  • Verbazingwekkende beeldkwaliteit met ondersteuning van UHD 4K resoluties tot 90 m
  • Ondersteunt HD 1080p resoluties tot 100 m

Met de ST121HDT4P HDMI® over CAT5e/6 video-extenderset kunt u HDMI-video en -audio uitbreiden tot 100 meter met één Cat5e/6-kabel. Voor nog meer veelzijdigheid kan zowel de zender als de ontvanger worden gevoed door dezelfde voeding met een Power Over Cable (POC).

Met deze veelzijdige HDMI-extender kunt u ook infrarood voor een IR-afstandsbediening uitbreiden, en 2 Ethernet LAN-verbindingen via dezelfde Cat5e/6-kabel.

Nu de A/V-sector snel 4K als de nieuwe high-resolution videostandaard heeft aangenomen, kan videoweergave op grote afstand een uitdaging zijn, vooral gezien de 4K afstandsbeperkingen van standaard HDMI-kabels. U zult versteld staan hoe deze HDBase-T extenderkit uw 4K videosignaal kan weergeven tot 90 m vanaf uw videobron.

De extenderset is ook neerwaarts compatibel met 1080p op 100 m afstand, zodat u deze extenderset comfortabel kunt gebruiken voor geweldige weergave van elke videobron.

De HDMI over Cat6-video-extenderset bevat zowel de lokale zender- als externe ontvangerunits, perfect voor punt-naar-punt digitale reclametoepassingen die hoogwaardige HDMI-video vereisen.

Voor extra afstand kunnen tot 10 m lange HDMI-kabels worden gebruikt op het lokale en externe uiteinde.

Gedekt door een StarTech.com 2-jarige garantie en gratis levenslange technische ondersteuning.

Toepassingen

  • Breid HDMI uit op plaatsen met een beperkt aantal stopcontacten, waarbij slechts één voedingsadapter vereist is voor de zender, met Power Over Cable
  • Plaats de weergaveapparatuur op een passende locatie, terwijl het systeem zelf in een schone en veilige omgeving wordt geplaatst
  • Kies een optimale locatie voor uw demonstratie op beurzen en in conferentiezalen
  • Ideaal voor videoconferencing bij vergaderingen en in kantoren

Partnernummers

  • Ingram Micro Netherlands 2485496
  • UPC 065030850964

Specificaties

Warranty Information Warranty 2 Years
Connector(en) 1 - Type connector(en) HDMI (19-polig)
3 - Type connector(en) RJ-45
2 - Type connector(en) IrDA (infrarood, SIR/FIR)
1 - Connector A HDMI (19-polig)
2 - Connector A IrDA (infrarood, SIR/FIR)
3 - Connector A RJ-45
Fysieke eigenschappen Kleur Zwart
Type behuizing Aluminium en kunststof
Lengte product 20.5 cm [8.1 in]
Breedte product 14.5 cm [5.7 in]
Hoogte product 7.3 cm [2.9 in]
Gewicht product 790 g [27.9 oz]
Hardware AV-ingang HDMI
AV-uitgang HDMI
Poorten 1
Bekabeling Cat5e UTP of beter
Audio Ja
Op elkaar aansluitbaar Nee
Prestaties Maximale kabellengte 100 m [328.0 ft]
Max. afstand 100 m / 330 ft
Maximale digitale resoluties 4K
Ondersteunde resoluties 3840x2160 (4K)
2560x1600
1920x1200
1920x1080 (1080p)
1280x720 (720p)
Ondersteuning breedbeeld: Ja
Audiospecificaties 7.1 surround sound
Algemene specificaties Maximale 1080p afstand: 100 m
Maximale 4K afstand: 90 m
Verpakkingsinformatie Package Height 73 mm [2.9 in]
Package Length 20.5 cm [8.1 in]
Package Width 14.5 cm [5.7 in]
Verzendgewicht (verpakt) 790 g [27.9 oz]
Voeding Inclusief voedingsadapter Inclusief wisselstroomadapter
Ingangsspanning 100 - 240 AC
Ingangsstroom 2A
Uitgangsspanning 48 DC
Uitgangsstroom 0.5A
Polariteit pin midden Positief
Stekkertype M
Vermogensopname 24
Wat wordt er meegeleverd 1 - Meegeleverd HDMI-extenderzenderunit
HDMI-extenderontvangerunit
Handleiding
Universele voedingsadapter (US/UK/EU)
2 - Meegeleverd IR-extenderkabels

Accessoires

Niet meer leverbaar
HDMIMM10

10 ft High Speed HDMI Cable - HDMI- M/M

Provides a high speed connection between HDMI®-enabled devices

Uw prijs
€16,99 EUR excl. BTW
€20,56 EUR incl. BTW
Uw prijs
€28,99 EUR excl. BTW
€35,08 EUR incl. BTW
Uw prijs
€28,99 EUR excl. BTW
€35,08 EUR incl. BTW
Niet meer leverbaar
HDMIMM6

6 ft High Speed HDMI Cable – Ultra HD 4k x 2k HDMI Cable – HDMI to HDMI M/M

Create Ultra HD connections between your High Speed HDMI®-equipped devices

Uw prijs
€10,99 EUR excl. BTW
€13,30 EUR incl. BTW

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

There are a few things you'll want to take care of before you deploy your new video extender in your setup.

It’s important to make sure you have everything you will need ahead of time. These items are listed below.

  • Transmitter
  • Receiver
  • Video source
  • Display
  • Video cables
  • (Optional) Ethernet or fiber cables
  • (Optional) Power adapter(s)

It’s also important to test everything in a simplified setup ahead of time to make sure everything works and that you understand how it works. 

In order to set up your video extender, complete the following:

  1. Position your video transmitter near your video source.
  2. Connect the video output from your video source to the video transmitter.
  3. (Optional) Connect the power adapter to the video transmitter.

Note: Not all video extenders require external power, or require external power on both ends.  Refer to the manual for more information.

  1. Position your video receiver near your display.
  2. Connect the video output from your video receiver to your display.
  3. (Optional) Connect the power adapter to the video receiver.
  4. If using a wired video extender, connect your network cabling between the video transmitter and the video receiver.
  5. (Optional) If you are extending anything else supported by your video extender connect those devices to the transmitter and receiver.
  6. (Optional) If you are using a wireless extender, there may be a sync button you need to press to pair the transmitter and receiver.

Now that you have set up your video extender, you can check that everything is working.  You should be able to see your video source's output on the display connected to the video receiver.

If at this point you have further questions regarding a Startech.com video extender, contact our technical support team for further assistance. 

To get the highest quality signal from your source to your display when you use an HDMI extender, do the following:

  • Make sure that the HDMI versions of the source, extender, and destination are compatible. For example, if you require 3D support, make sure that all of the devices can support 3D over HDMI.

  • Use the least amount of adapters, splitters, or converters as possible. Each device that you use in your setup creates additional points of potential failure and creates more steps for an HDCP key to hop through, which may cause issues with older displays. For more information on HDCP, refer to the following FAQ: http://www.startech.com/faq/video_signal_converters_HDCP.

  • Use an HDMI extender that exceeds the requirements of the setup. For example, if you need to extend the signal 200 feet, it is best to use an extender capable of more than 200 feet.

  • Make sure that all of the CAT 5/6 runs are as straight as possible, with the least amount of coiling.

  • Make sure that all of the patches, wall jacks, and cables use the highest possible CAT specification, (for example, CAT 6), and were tested to conform to the standard.

  • Use patches, wall jacks, and cables with the same pin configuration. For more information on T568A versus T568B wiring, refer to the following FAQ: http://www.startech.com/faq/network_cables_a_vs_b_pinout.

  • Keep the cabling away from sources of high noise.

  • Make sure that you use adequate electrical grounding in your setup.

Troubleshooting

When you troubleshoot issues with a video extender, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video and Ethernet cables

  • Video extender

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI extender, you should use an HDMI source when you test the components.

To test your setup components, try the following:

  • Use the cable, video extender, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video extender, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video extender from your setup and test to make sure that the video source and video destination work together without the video extender.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, extender, and destination all need to support the resolution that you are using.

Voor uw aanschaf

You should only use video converters and extenders if it is absolutely necessary to do so. In many cases, most video converters and extenders are not necessary if you purchase the correct cable.

The following table lists the maximum length of cable for common video standards.

Video standard Maximum length
DisplayPort 50 ft. (15.2m)
HDMI 50 ft. (15.2m)
DVI 50 ft. (15.2m)
VGA 200 ft. (71m)

Note: StarTech.com offers cables longer than what is listed above, including active cables, which typically include built-in active signal boosters that allow for longer cables. Active cables are specifically designed to exceed the suggested maximum lengths and are tested at the listed specifications (for example, the maximum listed resolution).

Video adapters

Video adapters passively adapt a cable from one connector type to another. Video adapters do not change the signal type, or change the video standard.

Examples of common applications for adapters include the following:

  • DVI-I to VGA

  • RCA to BNC

  • Mini DisplayPort to DisplayPort

  • Couplers (female to female, or male to male)

Note: You can use a coupler to extend a cable for a short distance. However, each coupler that you use can introduce signal loss, which degrades the signal quality.

Video converters

Video converters actively process and change the signal type from one video standard and convert it to another standard. They are typically used to convert digital to analog and vice versa, but can be used to convert a digital signal to another digital video standard (for example, HDMI to DisplayPort).

Video converters work over short distances from the source to the destination: up to 15 feet or 3 meters.

Video extenders

Video extenders convert an input signal to a higher voltage for transmission over longer distances and then convert the input signal back to the original video standard. The input and the output signal will match on a video extender, as the same video standard is maintained end-to-end. If a cable is extended with adapters or converters, the signal quality degrades.

Note: For more information on using a video adapter or converter with a video extender, see the following FAQ: http://www.startech.com/faq/video_signal_converters_convert_then_extend.

If you need to use a video extender with a video adapter or converter, you should position the adapter or converter as close to the video source as possible. For example, if you need to take a VGA signal from a computer and send it 200 feet to an HDMI® projector, you should convert the signal from VGA to HDMI and use an HDMI extender.

Note: For more information on when to use cables or extenders, see the following FAQ: http://www.startech.com/faq/video_signal_converters_when_to_convert.

Yes, this video extender works with set-top boxes, provided the set-top box meets the following requirements:

  • The set-top box must be High-bandwidth Digital Content Protection (HDCP) compliant.
  • The set-top box must support devices being connected between the video source and display. If the set-top box requires a direct cable connection between the video source and display, it won't work with this video extender.

No, this device is designed to be a point-to-point solution using networking cabling only. 

This device outputs HDMI video signals. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.

HDCP

When you consider whether to convert an HDMI video signal to another connection type, it is important to know if the media that is being converted from the HDMI video connection is protected by High-bandwidth Digital Content Protection (HDCP). If the media is protected by HDCP, you cannot convert to analog video connections because they do not support HDCP. You may experience this issue when you use devices like Blu-ray players, DVD players, and certain gaming consoles.

Target connection Conversion
VGA HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA.
DVI

HDMI to DVI: https://www.startech.com/Cables/Audio-Video/HDMI/HDMI-to-DVI/.

DisplayPort HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.

 

This device has an HDMI input port.  If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.

Source Connection

Conversion

VGA

VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.

DVI

DVI to HDMI video converters: https://www.startech.com/Cables/Audio-Video/Video-Adapter/HDMI-Cable-Adapters/.

DVI to HDMI video cables: https://www.startech.com/Cables/Audio-Video/HDMI/HDMI-to-DVI/.

DisplayPort

DisplayPort to HDMI passive converters: https://www.startech.com/AV/Displayport-Converters/DP-HDMI/?filter_CONVERTTYPE=Passive.

DisplayPort to HDMI active converters: https://www.startech.com/AV/Displayport-Converters/DP-HDMI/?filter_CONVERTTYPE=Active.

DisplayPort Passive and Active Conversions

The converter that you require depends on the type of DisplayPort video source that you are using. For more information about converting DisplayPort video signals, refer to the following FAQ: https://www.startech.com/faq/DisplayPort_Converter_DP_Multi_Mode.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Wacht...
Terug naar boven