2-poorts VGA video splitter - USB gevoed

Compacte USB-gevoede VGA-splitter waarmee u een videobron kunt verdelen naar twee afzonderlijke beeldschermen

Productcode: ST122LE

  • Ondersteuning voor resoluties tot 2048 x 1536 bij 60 Hz
  • Gevoed via USB
  • Onze meest compacte VGA-splitter
Uw prijs
€39,99 EUR excl. VAT
€48,39 EUR incl. VAT

Met deze 2-poort VGA Video Splitter kunt u vanaf een computer op twee monitoren tegelijk VGA-video weergeven.

De ST122LE VGA-splitter is ideaal voor gebruik in klaslokalen, beurzen of waar dan ook video van hoge kwaliteit op meerdere monitoren nodig is, en ondersteunt schermen tot 300 MHz bandbreedte en resoluties tot 2048x1536. Om de plaatsing van uw VGA-beeldschermen te vereenvoudigen is de splitter bovendien voorzien van een ingebouwde signaalversterker die het mogelijk maakt VGA-monitoren tot op 200 m afstand van uw systeem te plaatsen.

ST122LE Application Diagram

De ST122LE VGA-splitter ondersteunt eenvoudige plug-and-play installatie en u krijgt 2-jaar garantie en GRATIS levenslange technische ondersteuning door StarTech.com.

Toepassingen

  • Te gebruiken in winkels voor productpromotie om uw advertenties beter zichtbaar te maken
  • Toon aankomst- en vertrektijden of waarschuwingen op luchthavens en in bus- of treinstations
  • Vertoon pakkende multimediapresentaties in collegezalen en klaslokalen
  • Breng uw boodschap over via meerdere schermen op beurzen of bij informatiebalies
  • Snelle en gemakkelijke oplossing om een videosignaal op te splitsen in een gehoorzaal of gebedshuis

Het voordeel van StarTech.com

  • Via USB gevoede VGA-videosplitter, waarvoor geen externe voedingsadapter nodig is
  • Met meerdere schermen kunt u bij grote aantallen toeschouwers uw boodschap op effectieve en indrukwekkende wijze kenbaar maken
  • Geïntegreerde signaalversterker vergroot uw verbindingsbereik tot 60 meter

Partnernummers

  • Ingram Micro Netherlands 1595431
  • Tech Data - Netherlands 4428637
  • UPC 065030825856

Specificaties

Warranty Information Warranty 2 Years
Connector(en) Connector A 1 - VGA (15-polig, D-Sub met hoge dichtheid)
Connector B 2 - VGA (15-polig, D-Sub met hoge dichtheid)
Fysieke eigenschappen Gewicht product 100 g [3,5 oz]
Kleur Zwart
Type behuizing Kunststof
Gebruiksomgeving Bedrijfstemperatuur 0°C to 70°C (32°F to 158°F)
Opslagtemperatuur -20°C to 85°C (-4°F to 185°F)
Vochtigheid 0% - 95%
Hardware Poorten 2
Industriestandaarden DDC, DDC2, DDC2B, op video-uitgang 1
Prestaties Maximale kabellengte 60960
Maximale analoge resoluties 2048x1536
Bandbreedte 300MHz
MTBF 40,000 Hours
Verpakkingsinformatie Package Height 40 mm [1,6 in]
Package Length 21 cm [8,3 in]
Verzendgewicht (verpakt) 0,2 kg [0,5 lb]
Package Width 14,5 cm [5,7 in]
Voeding Inclusief voedingsadapter Gevoed via USB
Uitgangsspanning 5 DC
Uitgangsstroom 0.5A
Polariteit pin midden Positief
Stekkertype M
Wat wordt er meegeleverd Meegeleverd 1 - Video Splitter
1 - USB-naar-DC-voedingsadapter
1 - Handleiding

Accessoires

SVA5M3NEUA

Vervangende 5V DC voedingsadapter - 5 Volt, 3 Amp

Vervang uw zoekgeraakte of defecte voedingsadapter

Uw prijs
€19,99 EUR excl. VAT
€24,19 EUR incl. VAT
MXT101MMHQ

1,8m Coaxiale Hoge Resolutie VGA Video Monitorkabel - HD15 naar HD15 M/M

Sluit uw VGA-monitor aan met een verbinding van de hoogst mogelijke kwaliteit

Uw prijs
€8,99 EUR excl. VAT
€10,88 EUR incl. VAT
USB2TYPEM

USB naar 5,5 mm voedingskabel - type M connector - 91 cm

Voed uw 5 V gelijkstroomapparaten vanaf uw computer via een USB-poort

Uw prijs
€3,99 EUR excl. VAT
€4,83 EUR incl. VAT

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Voor uw aanschaf

This device outputs a VGA signal. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.

Target connection First conversion Second conversion (if required)
DVI-D VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. HDMI to DVI-D: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.
DVI-I VGA to DVI-I: https://www.startech.com/Cables/Audio-Video/Video-Adapter/DVIVGA/. N/A
HDMI

VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.

N/A
DisplayPort VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.

Note: You might need to use more than one converter as part of your solution; however, you should try to use the least number of converters and cables to connect your source and destination. If you have the option to convert to multiple target video connections, choose the option that requires the fewest number of conversions.

DVI-I and DVI-D

When you convert from VGA to DVI, you need to know if you are converting to a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you need, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.

You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.  

Note: Certain devices may have a DVI-I connection but only support DVI-D signaling. It is important to verify that your DVI-I device supports DVI-I signaling.

This device has a VGA input port.  If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.

Source connection

Conversion

DVI-I

DVI-I to VGA: https://www.startech.com/DVIVGAMFBK.

DVI-D

DVI-D to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=DVI-D&filter_AVOUTPUT=VGA.

HDMI

HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA.

DisplayPort

DisplayPort to VGA: https://www.startech.com/AV/Displayport-Converters/DP-VGA/.

DVI-I and DVI-D

When you convert from DVI to VGA, you need to know if you are converting from a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you have, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.

You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.  Some DVI-I connections only support DVI-D signaling.  In this case, you must use a DVI-D to VGA converter.

Troubleshooting

When you troubleshoot issues with a video splitter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video splitter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI splitter, you should use an HDMI source when you test the components.

To test your setup components, try the following:

  • Use the cable, video splitter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video splitter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video splitter from your setup and test to make sure that the video source and video destination work together without the video splitter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, splitter, and destination all need to support the resolution that you are using.

Video splitters take the output for monitor port 1 and mirror it to the remaining outputs. By default, the first output port is the master port that is mirrored to each additional monitor. Make sure that you use the first output port when you use the video splitter. The master port is labeled on the splitter boxes from StarTech.com. On the splitter cables from StarTech.com, the master port is the top port.

If you are having issues with a splitter interpreting the incorrect port as the master port, try the following:

  1. Unplug all of the video connections.

  2. If the splitter is powered, power cycle the splitter.

  3. Plug in all of the video connections again.

  4. Make sure that the first video connection plugged in is the one that you want to be the master port.

You might encounter resolution issues when you use a video splitter. This can occur because the information and resolution on one display are being copied and sent to each of the additional displays. You should make sure that all of the displays that you are using can support the output resolution. For more information, refer to the following FAQ: https://www.startech.com/faq/video_splitters_correct_port_usage

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven