Niet meer leverbaar

Composite en S-Video naar DVI-D Video converter met scaler

Converteer een composiet of S-videosignaal voor een DVI-monitor en pas het formaat aan

Productcode: VID2DVIDTV

  • Compatible with input from broadcast formats worldwide, including NTSC and PAL
  • Adjust picture brightness, contrast, color, and RGB levels
  • Includes a plastic bracket for wall mounts or side panel installation

This Composite video/S-Video to DVI-D Video Converter/Scaler lets you convert from composite/s-video/YCbCr/RGB resolutions and video formats to DVI-D, automatically detecting the video source input resolution and allowing you to customize the output resolution and refresh rate through an easy to use on-screen-display menu.

Great for home theatre peripherals like DVD players, the Composite video/S-Video to DVI-D Video Converter/Scaler lets you connect non-DVI/HDTV enabled equipment to DVI or HDTV display devices like flat panel monitors, DVI projectors and plasma screen TVs.


  • Home Theatre
  • Display video feeds from DVD players, VCRs and more on DVI monitors, plasma displays, DVI input projectors and HDTVs
  • Conference Room
  • Medical
  • Educational
  • Security

Het voordeel van

  • Convert video signals into DVI output for computer displays or HDTVs
  • Pure hardware design, no software or drivers required
  • Automatically detects the input resolution of the signal while allowing you to customize the output resolution and refresh rate using the on-screen-display menu and front panel buttons


  • Ingram Micro Netherlands 1595162
  • UPC 065030812016


Warranty Information Warranty 2 Years
Connector(en) 1 - Connector A S-Video (4-polig, Mini-DIN)
Composiet video (1 x RCA)
1 - Connector B DVI-I (29-polig)
Fysieke eigenschappen Kleur Zwart
Lengte product 14,6 cm [5,7 in]
Breedte product 77 mm [3,0 in]
Hoogte product 3 cm [1,2 in]
Gewicht product 280 g [9,9 oz]
Hardware Active or Passive Adapter Actief
AV-ingang S-Video
AV-uitgang DVI
Audio Nee
Prestaties Ondersteunde resoluties HDTV Output(50/60Hz)
1080i, 720p, 576p, 480p
PC Output (RGBHV, Progressive Scan)
1280 x 1024, 1280 x 768, 1024 x 768, 800 x 600, 640 x 480
Signaalniveau's Input Signal Levels: Video @ 1V p-p, 75 ohm
Y @ 1 V p-p, 75 ohm
Color @ 0.7V p-p, 75 ohm
Speciale opmerkingen / vereisten Notitie Multiple refresh rates supported on PC output - See product manual for full list
Verpakkingsinformatie Package Length 28,3 cm [11,1 in]
Package Width 72 mm [2,8 in]
Package Height 18,6 cm [7,3 in]
Verzendgewicht (verpakt) 1,1 kg [2,4 lb]
Voeding Inclusief voedingsadapter Inclusief wisselstroomadapter
Ingangsspanning 100 - 240 AC
Uitgangsspanning 5 DC
Uitgangsstroom 2.6A
Polariteit pin midden Positief
Vermogensopname 13
Wat wordt er meegeleverd 1 - Meegeleverd Video to DVI/HDTV Scaler
Plastic Bracket
3 foot (1 meter) Composite RCA cable
6 foot (1.8 meter) DVI-D DVI cable M-M
YCbCr RCA to 8 pin DIN adapter
Wall-mount power adapter
User’s manual



1, 8 m HDMI naar DVI-D kabel - M/M

Sluit een apparaat met HDMI®-uitgang aan op een DVI-D-beeldscherm, of een apparaat met DVI-D-uitgang op een HDMI-beeldscherm

Uw prijs
€11,99 EUR excl. BTW
€14,51 EUR incl. BTW

15 ft HDMI® to DVI-D Cable - M/M

Connect an HDMI®-enabled output device to a DVI-D display, or a DVI-D output device to an HDMI-capable display

Uw prijs
€26,99 EUR excl. BTW
€32,66 EUR incl. BTW
Niet meer leverbaar
Uw prijs
€29,99 EUR excl. BTW
€36,29 EUR incl. BTW

Vervangende 5V DC voedingsadapter - 5 Volt, 3 Amp

Vervang uw zoekgeraakte of defecte voedingsadapter

Uw prijs
€21,99 EUR excl. BTW
€26,61 EUR incl. BTW


Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)




Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)


This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).


When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video adapter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

To test your setup components, try the following:

  • Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.

Try the following:

  1. Check that the monitor’s video port works with another source.
  2. Check that the cables between the source and the destination work with other equipment.
  3. Check whether the video adapter works with another source and another destination.

The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue.  You may need to connect another monitor or restart the computer or source to accomplish this.

Voor uw aanschaf

Unfortunately no, this device has an intended source and an intended destination.  Refer to the title of the webpage for this order.

This is an active video signal converter.  

A passive video signal converter changes the type of connection that is being used but does not change the signal that passes through the converter. Because the video signal is not modified, passive converters tend to be smaller, simpler, and less expensive than active video signal converters. Examples of passive converters include DVI-I to VGA, HDMI to DVI, and DisplayPort to Mini-DisplayPort converters.

An active video signal converter modifies both the type of connection that is being used and the signal that passes through the converter. Because this type of conversion can be complex, active converters tend to be larger than passive video signal converters and sometimes require additional power. Examples of active converters include DVI-D to VGA, HDMI to DisplayPort, and VGA to HDMI converters.

For more information about passive and active DisplayPort video signal converters, refer to the following FAQ:

For more information about which type of video signal converter you should use when you convert video signals with an MST hub, refer to the following FAQ:

Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types: 

Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).

Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.

DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven