Product Zoeken

Dual-bay 2.5” SATA SSD / HDD mobiel rack voor 3.5” Bay - trayless backplane - RAID

Voor het gemakkelijk aansluiten en hotswappen van twee 2,5 inch SATA harde schijven of SSD's met één 3,5 inch front bay

Productcode: HSB225S3R

  • SATA III (6 Gbps) drive interface, compatibel met SATA I, II en III
  • Verhoog uw schijfcapaciteit, prestatie of dataredundantie, met meerdere RAID-modi: RAID 0, RAID 1, spanning
  • Ondersteunt tot twee 2,5 inch SATA SSD's/HDD's
Uw prijs
€93,99 EUR excl. BTW
€113,73 EUR incl. BTW

Met dit HDD mobiele rack kunt u twee 2,5 inch SATA harde schijven of solid-state drives in één 3,5 inch front bay installeren. Dankzij de configureerbare RAID ondersteuning vormt het SATA drive rack een ideale dataopslag oplossing.

Verhoogde prestatie en dataredundantie

Configureer en positioneer uw schijven voor verhoogde schijfcapaciteit, prestatie of dataredundantie met geïntegreerde RAID functionaliteit. Met meerdere RAID opties, zoals RAID 0, RAID 1, spanning of JBOD, kunt u de dataopslagoplossing bouwen die het best voor u werkt.

Hot-swap uw SATA schijven

Deze SATA backplane is trayless en hot-swappable, waardoor u uw schijven, indien nodig, eenvoudig in het computersysteem kunt installeren en eruit kunt verwijderen, zonder dat u de behuizing telkens hoeft te openen. Het is een comfortabele manier om back-ups te maken voor dataherstel en -archivering.

Ontworpen voor duurzaamheid en probleemloos gebruik

De verwijderbare hard-drive bay/backplane heeft een duurzame aluminium constructie voor langdurige prestaties. De SATA backplane heeft ook LED's voor voeding en activiteit van de harde schijf, en schijfstatus, waardoor u de status van uw harde schijven en RAID array eenvoudig in de gaten kunt houden.

De HSB225S3R wordt gedekt door een 2-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.

Toepassingen

  • Ideaal voor IT-professionals zoals systeemintegrators en -beheerders die zoeken naar flexibel opslagbeheer
  • Zorg voor incrementele of off-site opslag back-up-capaciteit door hot-swappable schijven op uw server of desktopcomputer aan te sluiten
  • Bespaar tijd in drukke werkomgevingen waarin schijven regelmatig moeten worden vervangen

Partnernummers

  • Ingram Micro Netherlands 4018488
  • Tech Data - Netherlands 4782933
  • UPC 065030872454

Specificaties

Warranty Information Warranty 2 Years
Connector(en) 1 - Schijfaansluitingen 22 pin SATA Data + Power (7 + 15 pin) Receptacle
1 - Hostaansluitingen Molex (4-polig, PWM)
7 pin SATA Data Receptacle
Fysieke eigenschappen Kleur Zwart
Type behuizing Aluminium en kunststof
Max. schijfhoogte 9,5 mm [0,4 in]
Lengte product 14,0 cm [5,5 in]
Breedte product 10,1 cm [4,0 in]
Hoogte product 25,0 mm [1,0 in]
Gewicht product 220,0 g [7,8 oz]
Gebruiksomgeving Bedrijfstemperatuur 0⁰C to 55⁰C (32°F to 131°F)
Opslagtemperatuur -20⁰C to 55⁰C (-4°F to 131°F)
Vochtigheid 5% ~ 65%
Hardware Vergrendeling Nee
Ventilator(en) Nee
Interface SATA
Aantal stations 2
Schijfgrootte 2.5in
Schijftype SATA
Schijfinstallatie Verwijderbaar
Aantal 2,5 inch bays 2
Ondersteunde schijfhoogte(n) 5mm
7mm
9.5mm
Chipsetcode ASMedia - ASM1092R
Indicatoren 2 - LED-indicatoren Koppeling/activiteit/storing
Prestaties TRIM Support Ja
S.M.A.R.T. Support Ja
Type en snelheid SATA III (6 Gbps)
Port-multiplier Ja
RAID Ja
Ondersteunde RAID-niveaus RAID 0 (stripe)
Hot-swappable Ja
Ondersteunde RAID-niveaus RAID 1 (mirror)
Aantal plaatsingen 50.000
Ondersteunde RAID-niveaus BIG (span of lineair)
JBOD - (Just a Bunch of Disks)
Speciale opmerkingen / vereisten Notitie TRIM and SMART have limited support while in a RAID configuration. A SATA controller with Port Multiplier support is required, in addition to the product configured in JBOD mode, to provide full TRIM and SMART support.
Verpakkingsinformatie Verzendgewicht (verpakt) 345,0 g [12,2 oz]
Package Length 19,8 cm [7,8 in]
Package Width 15,0 cm [5,9 in]
Package Height 45,0 mm [1,8 in]
Wat wordt er meegeleverd 1 - Meegeleverd Mobiel hotswap frame
SATA-datakabel
SATA naar LP4 adapter
Installatie schroevenset
verkorte handleiding

Accessoires

LSATA6

15 cm Vergrendelbare SATA-kabel

Veilig vergrendelbare SATA-kabel voor nieuwe moederborden en SATA harde schijven

Uw prijs
€3,99 EUR excl. BTW
€4,83 EUR incl. BTW
BRACKETFDBK

3,5 inch Harde Schijf naar 5,25 inch Bay Montagebeugel Adapter

Installeer een 3,5 inch harde schijf in een enkele 5,25 inch bay

Uw prijs
€6,99 EUR excl. BTW
€8,46 EUR incl. BTW
LSATA12

30 cm Vergrendelbare SATA-kabel

Vergrendelbare SATA-aansluitingen voor een betrouwbare installatie van harde schijven

Uw prijs
€3,99 EUR excl. BTW
€4,83 EUR incl. BTW
LSATA18

45 cm Vergrendelbare SATA-kabel

SATA-kabel met vergrendelbare SATA-aansluitingen voor een betrouwbare installatie van harde schijven

Uw prijs
€4,99 EUR excl. BTW
€6,04 EUR incl. BTW
LSATA24

60 cm Vergrendelbare SATA-kabel

SATA hard drive cable, with latching SATA connectors, for securely fastened hard drive installations.

Uw prijs
€5,99 EUR excl. BTW
€7,25 EUR incl. BTW
Niet meer leverbaar
LSATARND12

30cm Ronde Vergrendelbare SATA Kabel

Sluit vergrendelbare SATA-schijven aan en zorg daarbij voor een optimale luchtstroom in de behuizing van een pc of server

Uw prijs
€3,99 EUR excl. BTW
€4,83 EUR incl. BTW
Niet meer leverbaar
LSATARND18

45cm Ronde Vergrendelbare SATA Kabel

Sluit vergrendelbare SATA-schijven aan en zorg daarbij voor een optimale luchtstroom in de behuizing van een pc of server

Uw prijs
€4,99 EUR excl. BTW
€6,04 EUR incl. BTW
Niet meer leverbaar
LSATARND24

60cm Ronde Vergrendelbare SATA Kabel

Sluit vergrendelbare SATA-schijven aan en zorg daarbij voor een optimale luchtstroom in de behuizing van een pc of server

Uw prijs
€5,99 EUR excl. BTW
€7,25 EUR incl. BTW
PYO2L

LP4 naar 2x LP4 Voedingskabel Y-adapter M/F

Sluit twee LP4-randapparaten (CD/DVD-ROM drives etc.) aan op een enkele LP4-connector

Uw prijs
€2,99 EUR excl. BTW
€3,62 EUR incl. BTW
PYO2LSATA

15 cm vastklikkende SATA voeding-Y-splitterkabeladapter - M/F

Voeg een extra SATA-stopcontact aan uw PC-voeding toe

Uw prijs
€5,99 EUR excl. BTW
€7,25 EUR incl. BTW
LP4SATAFM6IN

15cm SATA naar LP4 Verloopkabel Voeding - F/M

Sluit een IDE harde schijf aan op een SATA-voedingsconnector

Uw prijs
€3,99 EUR excl. BTW
€4,83 EUR incl. BTW

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Diagrammen

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Troubleshooting

When you troubleshoot issues with a hard drive rack, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • SATA and SAS cables
  • Hard drives
  • Hard drive rack

To test your setup components, try the following:

  • Use the cables, hard drives, and hard drive rack in another setup to see if the problem is with the components or the setup.
  • Use a different cable, hard drive, and hard drive rack in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard drive and hard drive rack, it is recommended that you do the following:

  • To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter.  Check to see if your hard drive is listed.
  • If the hard drive is listed with unallocated space, it needs to be formatted. Right-click unallocated and click New Simple Volume. Follow the on-screen instructions to complete the reformatting.

Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.

  • If the hard drive is listed as healthy but does not have a drive letter assigned to it, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.

Note: A formatted hard drive will not show up in Computer or My Computer until it has a drive letter assigned to it.

In order to rebuild a RAID array, you need to replace a physical drive with an identical drive on the same RAID controller. Although standard RAID levels are generally agreed upon throughout the industry, the implementation varies between manufacturers. RAID arrays are typically not accessible when they are moved to another controller, and data may be unrecoverable if the drives are out of order or have been formatted or accessed by another RAID controller.

If a RAID controller has failed, you should get the exact same model of RAID controller.  

Note: If a drive or drives were damaged, it is possible that the RAID array may be permanently unrecoverable.

RAID should not be considered a replacement for backing up your data. If critical data is going onto a RAID array, you should back up the data on another physical drive or logical set of drives.

Rebuild a RAID array

With the following RAID modes, recovery is possible using the same StarTech.com product. Refer to the following table for the appropriate method to use to recover your RAID array.

RAID mode Max # of failed drives Procedure
RAID 1 Only one drive is needed for recovery.
  1. Determine which drive is operational by using the RAID management utility (if available) or test each drive individually on a different hard drive controller (for example, a hard drive docking station or SATA controller).

  2. Replace the failed drive with an identical hard drive.

The array will rebuild and is accessible during the rebuilding process.

RAID 3 Single drive failure will rebuild.
  1. Determine which drive is defective by using the RAID management utility (if available) or with diagnosis LEDs on the controller or enclosure.

  2. Replace with an identical hard drive.

Note: Do not change the order of the drives.

  1. The array may be accessible during the rebuild, but you should let the controller rebuild without interruption so that performance is not compromised.

RAID 5 Single drive failure will rebuild.
  1. Determine which drive is defective by using the RAID management utility (if available) or with diagnosis LEDs on the controller or enclosure.

  2. Replace with an identical hard drive.

Note: Do not change the order of the drives.

  1. The array may be accessible during the rebuild, but you should let the controller rebuild without interruption so that performance is not compromised.

RAID 10 Only one drive in a mirrored set can fail.
  1. Determine which drive is defective by using the RAID management utility (if available) or with diagnosis LEDs on the controller or enclosure.

  2. Replace with an identical hard drive.

Note: Do not change the order of the drives.

  1. The array may be accessible during the rebuild, but you should let the controller rebuild without interruption so that performance is not compromised.

 

Voor uw aanschaf

Note: Not all StarTech.com devices support each of the RAID modes described below. For more information on the RAID modes that your device supports, refer to the manual or the StarTech.com product page.

Redundant Array of Independent Disks (RAID) is a virtual disk technology that combines multiple physical drives into one unit. RAID can create redundancy, improve performance, or do both.

RAID should not be considered a replacement for backing up your data. If critical data is going onto a RAID array, it should be backed up to another physical drive or logical set of drives.

The following are terms that are normally used in connection with RAID:

  • Striping: data is split between multiple disks.
  • Mirroring: data is mirrored between multiple disks.
  • Parity: also referred to as a checksum. Parity is a calculated value used to mathematically rebuild data.

Different RAID levels exist for different application requirements.

Refer to the following table for the list of RAID modes offered by some StarTech.com products:

RAID mode Description Operation Advantages Disadvantages Recovery
RAID 0 Striped disks Data is split evenly between two or more disks. Large size and the fastest speed. No redundancy. If one or more drives fails, this results in array failure.
RAID 1 Mirrored disks Two or more drives have identical data on them. A single drive failure will not result in data loss. Speed and size is limited by the slowest and smallest disk. Only one drive is needed for recovery.
RAID 3 Striped set with dedicated parity Data is split evenly between two or more disks, plus a dedicated drive for parity storage. High speeds for sequential read/write operations. Poor performance for multiple simultaneous instructions. A single drive failure will rebuild.
RAID 5 Striped disks with distributed parity Data is split evenly between three or more disks. Parity is split between disks. Large size, fast speed, and redundancy. The total array size is reduced by parity. A single drive failure will rebuild.
RAID 10 1+0; Striped set of Mirrored Subset Four or more drives are made into two mirrors that are striped. Larger size and higher speed than RAID-1, and more redundancy than RAID-0. No parity. Only one drive in a mirrored set can fail.
JBOD Just a Bunch Of Disks Any number of drives are accessed independently by the operating system. Software RAID modes can be used. Hardware RAID may have better performance. N/A
Big Spanning or Concatenation Data is written on one drive until it is full, and then the next drive(s) until it or they are full. Creates a very large and simple array.

No redundancy.

N/A
Clone RAID 1 + Spare

Two drives have identical data, plus one drive is used for rebuilding in case of a primary array failure.

Seamless operation when one drive fails in a RAID-1 array. Spare drive is not accessible to the user. Only one drive is needed for recovery.

 

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Wacht...
Terug naar boven