2-poorts PCI Express (PCIe x4) gigabit ethernet server netwerk- adapter kaart - Intel i350 NIC

Voeg twee Gigabit Ethernet-poorten toe aan een computer, server of werkstation via een PCI Express-slot

Productcode: ST2000SPEXI

  • Twee RJ-45 Ethernet-poorten met 10/100/1000 Mbit/s
  • Voldoet volledig aan IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE802.3ad (linkaggregatie) en ondersteunt IEEE 802.1Q VLAN tagging
  • Jumbo Frame ondersteuning tot 9k byte
Uw prijs
€219,99 EUR excl. BTW
€266,19 EUR incl. BTW

Dankzij de ST2000SPEXI PCI Express 2-poorts gigabitnetwerkkaart kunt u twee gigabit ethernetpoorten op een desktopcomputer aansluiten via een enkelvoudige, vierlaans (x4 of hoger) PCI Express-sleuf. Iedere poort is volledig compatibel met IEEE 802.3/u/ab-normen, voor 10/100/1000 Mbps auto-negotiation.

Deze 2-poorts GbE-netwerkkaart is gebaseerd op de krachtige Intel® I350 chipset, die verschillende geavanceerde driveropties biedt, zoals IEEE 802.3ad linkaggregatie/teamingondersteuning. Hierdoor kunt u uw systeem van extra bandbreedte voorzien. De ondersteuning voor Jumbo Frames, full-duplexgebruik en 802.1q VLAN tagging helpt tevens bij het creëren van een efficiënte netwerkconfiguratie.

Deze 2-poorts netwerkkaart is ook handig voor virtualisatietoepassingen (controleer uw VM-software voor de compatibiliteit van de chipset) of om een dual-homed hostconfiguratie op te zetten. Met deze kaart kunt u verschillende complexe netwerkscenario's opstellen om aan de behoeften van uw bedrijf te voldoen. Voor nog meer veelzijdigheid is de controllerkaart uitgerust met een standard-profile-steun, terwijl een low-profile-/halfhoge steun is meegeleverd voor installatie in kleine-vormfactorcomputers.

Gedekt door een 2-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.

Toepassingen

  • Ideaal voor VM-omgevingen met meerdere besturingssystemen die gedeelde of speciale NIC's vereisen
  • Zorgt voor redundantie in de connectiviteit om een ononderbroken netwerkverbinding zeker te stellen
  • Configureer een dual-homed proxy- of gatewaysysteem als extra beveiliging
  • Speciaal ontworpen voor desktop pc cliënten, servers en werkstations met weinig beschikbare PCI Express-sleuven

Het voordeel van StarTech.com

  • Verdubbel de netwerkbandbreedte naar een enkelvoudig systeem via linkaggregatie/teamingondersteuning
  • Optimaliseer het netwerkverkeer door ondersteuning van geavanceerde kenmerken zoals Jumbo Frames en VLAN tagging
  • Maximaliseer de netwerkefficiency van uw gevirtualiseerde server met speciale poorten

Partnernummers

  • Ingram Micro Netherlands 2536928
  • Tech Data - Netherlands 4428863
  • UPC 065030852739

Compatibility

  • Windows 8 logo
  • Windows Server 2012 logo
  • Linux logo
  • Windows 7 logo
  • Windows 10 logo
  • Windows Server 2016 logo
  • Windows 11 logo
  • Windows Server 2019 logo
Windows® 7, 8, 8.1, 10, 11
Windows Server® 2008 R2, 2012, 2012 R2, 2016, 2019
Linux 2.4.x tot 4.11.x Alleen LTS-versies

Specificaties

Warranty Information Warranty 2 Years
Connector(en) 1 - Type connector(en) PCI Express x4
2 - Externe poorten RJ-45
Fysieke eigenschappen Gewicht product 80 g [2.8 oz]
Kleur Black
Type behuizing Steel
Lengte product 67 mm [2.6 in]
Breedte product 19 mm [0.7 in]
Hoogte product 12.1 cm [4.8 in]
Gebruiksomgeving Bedrijfstemperatuur 0°C to 50°C (32°F to 122°F)
Opslagtemperatuur -20°C to 60°C (-4°F to 140°F)
Vochtigheid 5% - 85% rel. luchtvochtigheid
Hardware Poorten 2
Interface RJ45 (Gigabit Ethernet)
Bus type PCI Express
Kaarttype Standard Profile (LP bracket incl.)
Poorttype Integrated on Card
Industriestandaarden IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
PCI Express basisspecificatie 2.1
Chipsetcode Intel - I350-AM2
Indicatoren 2 - LED-indicatoren 10/100/1000 Mbps Indicator
Koppeling/Activiteit
Prestaties Maximale overdrachtsnelheid 2000 Mbps (full-duplex), 1000 Mbps (half-duplex)
Compatibele netwerken 10/100/1000 Mbps
Auto MDIX Yes
Full duplex ondersteuning Yes
Jumbo Frame Support 9K max.
Promiscuous Mode Yes
MTBF 432.400 uur
Ondersteunde protocollen IEEE 802.3ad (link aggregation), IEEE 1588 (time sync) / 802.1AS, IEEE 802.1q (VLAN tagging)
Software Besturingssystemen Windows® 7, 8, 8.1, 10, 11
Windows Server® 2008 R2, 2012, 2012 R2, 2016, 2019
Linux 2.4.x tot 4.11.x Alleen LTS-versies
Speciale opmerkingen / vereisten Systeem- en kabelvereisten Beschikbare PCI Express x4 of hoger (x8, x16) sleuf
Verpakkingsinformatie Package Height 29 mm [1.1 in]
Package Length 14.4 cm [5.7 in]
Verzendgewicht (verpakt) 165 g [5.8 oz]
Package Width 17.2 cm [6.8 in]
Wat wordt er meegeleverd 1 - Meegeleverd 2-poorts netwerkkaart
Low-profile bracket
Driver-CD
Handleiding

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Drivers:

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Open the appropriate folder for your operating system.
  3. Right-click on either Windows 32bit.exe or Windows 64bit.exe as appropriate for your operating system. 
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. Your computer will automatically complete the driver installation and your device should be ready to use.

Troubleshooting

When you troubleshoot issues with a network adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Ethernet cables
  • Network devices
  • Computer system

To test your setup components, try the following:

  • Use the Ethernet cables, network devices, and computer system in another setup to see if the problem is with the components or the setup.
  • Use different Ethernet cables, network devices, and a different computer system in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.
  • Use short cables when you are testing.

When you test the Ethernet cables, network devices, and computer system, it is recommended that you do the following:

Sometimes an on-board network interface card (NIC) conflicts with a new NIC.  In these cases it is best to disable the on-board NIC.

The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible.  To do this, consult your motherboard manual.

You can also disable any NIC in Windows.  Here is how you do this:

First click Start, or, in Windows 10 and 8, hold down the Windows key and press X.  Then click Control Panel.

Windows 10

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows 8

  1. Click Network and Sharing Center.
  2. On the left, click Change adapter settings.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows 7

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows Vista

  1. Click Network and Sharing Center.
  2. On the left, click Manage network connections.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows XP

  1. Click Network Connections.
  2. Right-click the NIC that you would like to disable and select Disable.

If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings.  You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed.

Note: You must log in as the local administrator before you continue.

To open Device Manager:

  • Press Windows key + R.
  • Type devmgmt.msc.
  • Click OK.
  1. Open the Networking adapters section.
  2. Right-click the network adapter that you want to change and select Properties.
  3. Click the Advanced tab.
  4. Scroll down to Speed & Duplex. By default, it is set to Auto-Negotiate. Select any of the speeds that you see in the list.
  5. Click OK and restart your computer.

Hoe gaat u te werk

StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met:

  1. The BIOS must support PXE.
  2. The BIOS must see the card.
  3. The environment must have drivers for the chipset used in the card.
  4. If using a USB networking card, the environment must have support for USB devices as well.

Virtual local area network (VLAN) tagging requires that the network interface card (NIC) and the router or switch that you use support protocol IEEE 802.1q.

Depending on the NIC, you can set your VLAN ID in Device Manager.  Not all NICs that support VLAN tagging have this option.

Setting your VLAN ID in Device Manager

Note: Log in as the local administrator before continuing.

To open Device Manager:

  • Press Windows key + R
  • Type devmgmt.msc
  • Click OK.
  1. In Device Manager, open Network adapters.
  2. Right-click on the NIC and choose Properties.
  3. Click the Advanced tab.
  4. Scroll down to VLAN ID.
  5. Set the ID that you would like the NIC to have and click OK.

Setting up your VLAN Tagging and Setting a VLAN ID

How you perform this task depends on your router or switch.  Consult the manual or manufacturer of your router or switch for more details.

In your router or switch, you can VLAN tag a device by the VLAN ID if you set one previously, or by the MAC address of the computer.  Your router or switch will list all IP devices by MAC address.

For most operating systems, network interface card (NIC) teaming requires that the NIC and the router or switch support the protocol IEEE 802.1ax or IEEE 802.3ad. 

Windows Server 2012, however, has native support for NIC teaming, so the NIC and the router or switch do not need to support the protocols. To configure NIC teaming in Windows Server 2012 do the following:

  1. Click Start.
  2. Click Server Management.
  3. Click NIC Teaming enabled.
  4. Set up the NIC team as you would like.

If you view the Networking Connections section in the window, you can see the NIC team in the list as well as the Ethernet and wireless adapter cards.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Wacht...
Terug naar boven