Productcode: USB32000SPT
Met de USB32000SPT USB 3.0 naar 2-poorts gigabit Ethernet-adapter kunt u twee gigabit Ethernet-poorten toevoegen aan uw laptop of Ultrabook™-computer via één USB 3.0 poort. De adapter is uitgerust met een geïntegreerde USB 3.0 pass-through-poort, waardoor uw USB-poort beschikbaar blijft voor externe opslagapparaten of andere randapparatuur. Elke RJ45-poort ondersteunt 10/100/1000 Mbps Ethernet en voldoet volledig aan de IEEE 802/u/ab standaards.
Deze 2-poorts USB LAN-adapter is een veelzijdige oplossing voor het tegelijkertijd aansluiten van twee aparte fysieke netwerken, waardoor de 5 Gbps snelheid van USB 3.0 optimaal wordt benut voor een speciale gigabit-bandbreedte voor elke poort. De dubbele USB NIC kan ook prima worden gebruikt als speciale fysieke netwerkinterfaces naar virtuele machineconfiguraties. Een geweldige oplossing voor IT-beheerders die dual-homed of multi-homed hostsystemen nodig hebben.
De USB 3.0 NIC ondersteunt IPv4/IPv6 packet Checksum Offload Engine (COE) en TCP Large Send Offload om de belasting van uw CPU te verlagen, alsmede Jumbo Frames, full-duplex bediening met 802.3x datastroomregeling en VLAN tagging voor een efficiënte en met vele functies uitgeruste USB-netwerkadapter.
Gedekt door een StarTech.com 2-jarige garantie en gratis levenslange technische ondersteuning.
Warranty Information | Warranty | 2 Years |
---|---|---|
Connector(en) | 1 - Type connector(en) | USB Type-A (9-polig) USB 3.0 (5 Gbps) |
2 - Type connector(en) | RJ-45 | |
1 - Type connector(en) | USB Type-A (9-polig) USB 3.0 (5 Gbps) | |
Fysieke eigenschappen | Form Factor | Aangesloten kabel |
Gewicht product | 59 g [2,1 oz] | |
Kleur | Zwart | |
Type behuizing | Kunststof | |
Kabellengte | 20,3 cm [8,0 in] | |
Lengte product | 75 mm [3,0 in] | |
Breedte product | 60 mm [2,4 in] | |
Hoogte product | 16 mm [0,6 in] | |
Gebruiksomgeving | Bedrijfstemperatuur | 0°C to 50°C (32°F to 122°F) |
Opslagtemperatuur | -20°C to 60°C (-4°F to 140°F) | |
Vochtigheid | 5% - 85% rel. luchtvochtigheid | |
Hardware | Poorten | 2 |
Interface | RJ45 (gigabit Ethernet) | |
Bus type | USB 3.0 | |
Industriestandaarden | IEEE802.3i IEEE 802.3u IEEE 802.3ab IEEE 802.3az IEEE 802.1q (ondersteunt VLAN Tagging) | |
Chipsetcode | ASIX - AX88179 VIA/VLI - VL811 |
|
Indicatoren | 1 - LED-indicatoren | Gigabit koppeling/activiteit (geel) |
2 - LED-indicatoren | 10/100 Link/Activiteit (groen) | |
Prestaties | Maximale overdrachtsnelheid | 5 Gbps (USB 3.0) 2 Gbps (Ethernet; full-duplex) |
Max. afstand | 100 m / 330 ft | |
Type en snelheid | USB 3.0 - 5 Gbit/s | |
Compatibele netwerken | 10/100/1000 Mbps | |
Auto MDIX | Ja | |
Full duplex ondersteuning | Ja | |
Jumbo Frame Support | 4K max. | |
Software | Besturingssystemen | Windows® XP, Vista, 7, 8, 8.1, 10 Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016, 2019 Mac OS® 10.6 tot 10.15 - VLAN Tagging wordt momenteel niet ondersteund in het Mac-besturingssysteem Linux kernel 2.6.25 tot 4.11.x Alleen LTS-versies |
Speciale opmerkingen / vereisten | Systeem- en kabelvereisten | Vrije USB-poort |
Verpakkingsinformatie | Package Height | 31 mm [1,2 in] |
Package Length | 14,1 cm [5,6 in] | |
Verzendgewicht (verpakt) | 154 g [5,4 oz] | |
Package Width | 17,1 cm [6,7 in] | |
Voeding | Inclusief voedingsadapter | Gevoed via USB |
Wat wordt er meegeleverd | 1 - Meegeleverd | USB 3.0 dubbele netwerkadapter |
Driver-CD | ||
Handleiding |
Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).
To install the driver:
Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).
Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.
Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).
To install the driver:
Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).
Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).
Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).
Note: The Select your device’s type from the list below screen does not appear on all systems. If you do not see this screen, skip this step.
Note: To view your system type, click Start. Right-click Computer, and then click Properties.
Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).
Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).
Note: The Hardware Type screen does not appear on all systems. If you do not see this screen, skip this step.
Note: To view your system type, click Start. Right-click Computer, and then click Properties.
Download the latest drivers from the StarTech.com website at www.startech.com/Support. The part number and product ID are on the product packaging.
Note: Mac OS X usually saves the files to the Downloads folder that is associated with your user account and is located on the drive where Mac OS X is installed (for example, Macintosh HD\Users\your_name\Downloads).
When you troubleshoot issues with a network adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
When you test your cables, it is recommended that you do the following:
When you test the Ethernet cables, network devices, and computer system, it is recommended that you do the following:
If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings. You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed.
Note: You must log in as the local administrator before you continue.
To open Device Manager:
If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power.
The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
Windows 10 / 8
Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.
Windows 7 / Vista
Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.
Windows XP
Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.
StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met:
To confirm that Windows detects your USB device, complete the following:
Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.