Niet meer leverbaar

2-poort ExpressCard eSATA Controller/Adapter-kaart

Voeg 2 eSATA-poorten toe via de ExpressCard-slot van uw laptop

Productcode: ECESATA22

  • Twee externe SATA (eSATA)-poorten
  • Ondersteuning voor FIS en command-based port-multiplier technologie
  • Past in 34mm en 54mm ExpressCard-slots

Deze 2-poort eSATA ExpressCard-adapter stelt laptop-gebruikers in staat het hoge prestatieniveau te beleven van eSATA-opslagmedia met overdrachtsnelheden tot 3 Gbit/s, evenals port-multiplier functionaliteit met command-based switching voor het aansluiten van meerdere externe harde schijven op een PC of Mac-notebook via een enkele eSATA-aansluiting.

De eSATA-controller beschikt over een native PCI Express-chipset, die zorgt voor een verbeterde compatibiliteit, betrouwbaarheid en prestatie van externe opslagmedia.

Toepassingen

  • Breid een laptop uit met eSATA-connectiviteit voor het aansluiten van externe opslagmedia met hoge snelheid
  • Upgrade van het aansluiten van externe opslagmedia via USB 2.0 naar het snellere eSATA

Het voordeel van StarTech.com

  • Port-multiplier technologie ondersteunt meervoudige externe schijfstations via een enkele eSATA-kabel bij snelheden tot 3.0 Gbit/s
  • In 34mm en 54mm ExpressCard-slots passende, kleine vormfactor voor veelzijdigheid en mobiliteit
  • De native PCI Express-chipset in plaats van een bridge-chip zorgt voor een snelle, betrouwbare en kosteneffectieve SATA-oplossing

Partnernummers

  • UPC 065030824101

Compatibility

  • Windows 8 logo
  • Linux logo
  • Mac OS X Yosemite (10.10) logo
  • Windows 10 logo
  • Mac OS X Mavericks (10.9) logo
  • Mac OS X El Capitan (10.11) logo
Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012
Mac OS X® 10.6 to 10.11
Linux 3.5.x to 4.4.x LTS Versions only

Specificaties

Warranty Information Warranty Lifetime
Connector(en) Type connector(en) 1 - ExpressCard (34mm)
Externe poorten 2 - eSATA (7-polig, data)
Fysieke eigenschappen Lengte product 11,2 cm [4,4 in]
Breedte product 34 mm [1,3 in]
Hoogte product 2,1 cm [0,8 in]
Gewicht product 40 g [1,4 oz]
Hardware Poorten 2
Interface eSATA
Bus type ExpressCard
Kaarttype 34mm ExpressCard
Chipsetcode Silicon Image - SiI3132
Prestaties Type en snelheid SATA II (3 Gbps)
Port-multiplier Ja
RAID Nee
Software Besturingssystemen Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012
Mac OS X® 10.6 to 10.11
Linux 3.5.x to 4.4.x LTS Versions only
Verpakkingsinformatie Package Length 17,2 cm [6,8 in]
Package Width 7,2 cm [2,8 in]
Package Height 185 mm [7,3 in]
Verzendgewicht (verpakt) 0,1 kg [0,2 lb]
Wat wordt er meegeleverd Meegeleverd 1 - eSATA ExpressCard-controllerkaart
1 - Driver-CD
1 - Handleiding

Accessoires

ESATAPLATE1

1 poorts SATA naar eSATA slotplaatje

Verander een standaard SATA-moederbordaansluiting in een externe eSATA-poort

Uw prijs
€5,99 EUR excl. VAT
€7,25 EUR incl. VAT
SATA2ESATA6

6 ft Shielded eSATA to SATA Cable

Sluit eSATA-apparaten aan op een standaard SATA-poort

Uw prijs
€9,99 EUR excl. VAT
€12,09 EUR incl. VAT
ESATA3

90cm Afgeschermde Externe eSATA Kabel M/M

Sluit uw externe SATA-opslagapparaten aan op uw laptop of desktopcomputer.

Uw prijs
€7,99 EUR excl. VAT
€9,67 EUR incl. VAT
ESATA6

1.8m afgeschermde externe eSATA kabel - M/M

Sluit uw externe SATA-opslagapparaten aan op uw laptop of desktopcomputer.

Uw prijs
€10,99 EUR excl. VAT
€13,30 EUR incl. VAT

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Drivers:

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Hoe gaat u te werk

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your expansion card, complete the following:

  1. In the upper-left screen, click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your expansion card is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command + R with the System Information page open.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

In order to use a hard drive plugged into a hard drive controller card as your operating system, you need to install the operating system onto the hard drive while it is plugged into the expansion card. To do this, complete the following:

Note: Not all hard drive controller cards have drivers that allow you to install the operating system onto the hard drive. All of the hard drive controllers that display this FAQ include this capability.

Before you begin, consult the documentation that came with the motherboard to make sure that the motherboard or BIOS supports booting from an expansion card.

  1. Back up any data on the hard drive.
  2. Make a copy of the drivers from the website onto a floppy disc, CD, DVD, or USB flash drive. The drivers that you download depends on the operating system that you want to install.
  3. Install the hard drive controller card onto your motherboard.
  4. Plug the hard drive into the controller card.
  5. Turn on your computer and open the operating system install wizard.
  6. Before you select the hard drive that you want to install the operating system onto, select the option to install third-party drivers.
  7. Point the driver installer to the floppy disc, CD, DVD, or USB flash drive.
  8. Install the drivers.
  9. Select the hard drive on the hard drive controller card as the location where you want to install the operating system.
  10. Complete the on-screen instructions to finish installing the operating system.

Installatie

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.
  3. Right-click SCSI and RAID Controllers, which will have a “!” or “?” next to it to indicate a driver issue.
  4. Click Update Driver.
  5. Click Browse my computer for driver software.
  6. Select the Let me pick from a list of device drivers on my computer option.
  7. On the Select your device’s type from the list below screen, click Show All Devices, and click Next.

Note: The Select your device’s type from the list below screen does not appear on all systems. If you do not see this screen, skip this step.

  1. Select the Have Disk option.
  2. Browse to the extracted folder from Step 2.
  3. Open the Windows folder.
  4. Open the Manual Drivers folder.
  5. Open the folders as appropriate for your system type and hardware.

Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  1. Click the SI3132.inf file. Click OK, and then click Next. Additional device listings will appear in Device Manager.
  2. Complete steps 4 to 11 for each of the new device listings.

Troubleshooting

When you troubleshoot issues with a hard drive controller card, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • IDE, SATA, and eSATA cables

  • Hard drives

  • Hard drive controller card

To test your setup components, try the following:

  • Use the IDE, SATA, or eSATA cable, hard drive, and hard drive controller card in another setup to see if the problem is with the components or the setup.

  • Use a different IDE, SATA, or eSATA cable, hard drive, and hard drive controller card in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the hard drive and hard drive controller card, it is recommended that you do the following:

  1. To open the Device Manager, press the Windows key + R, type devmgmt.msc, and press Enter. Check the IDE ATA/ATAPI controllers (for IDE) section, or the Storage controllers (for SATA) section.

  2. Do one of the following:

Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.

  1. To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter. Check to see if your hard drive is listed.

  2. If the hard drive is listed as healthy but does not have a drive letter, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.

Note: A formatted hard drive does not show up in Computer or My Computer until it has a drive letter assigned to it.

Voor uw aanschaf

Although you can adapt a Serial Attached SCSI (SAS) drive to connect to a standard SATA controller card, the card must support SAS commands in order to communicate with SAS drives. SAS drives have a different command set that is not present on SATA controllers.

This SATA controller card only supports standard SATA drives.

This device does not support the ATA Packet Interface (ATAPI) protocol. ATAPI is required for optical drives, including CD-ROM drives, DVD-ROM drives, and Blu-ray players. Because this device does not support ATAPI, optical drives are also not supported over any IDE, SATA, or eSATA connections.

For a list of products that do support ATAPI, refer to the following FAQ: https://www.startech.com/faq/hard_drive_controllers_atapi_support.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven