16-poorts USB naar serieel adapter hub

Verander een USB-poort in 16 RS232 seriële poorten in een industrieel rack monteerbaar chassis - en lus meerdere hubs door voor een schaalbare oplossing

Productcode: ICUSB23216FD

  • Voeg 16 RS232 seriële poortinterfaces toe via één USB-poort
  • Sluit meerdere hubs op elkaar aan met de doorlus functionaliteit
  • 921.6 Kbps baudsnelheid per poort
Uw prijs
€606,99 EUR excl. VAT
€734,46 EUR incl. VAT

Hier is een eenvoudige en voordelige manier om RS232 seriële capaciteiten aan uw industriële omgeving toe te voegen. Deze 16-poorts USB naar seriële adapterhub heeft een stevig rack mountable chassis en ondersteunt doorlussen / daisy chaining, zodat u meerdere hubs op elkaar kunt aansluiten en uw aantal seriële apparaatpoorten kunt verhogen.

Een schaalbare oplossing voor veranderende behoeften

Met deze rack mountable, seriële USB-hub (FTDI) kunt u 16 seriële poorten (RS232) toevoegen, met volledige bediening vanaf uw desktop of laptop via één USB-poort. De daisy-chainfunctie is een voordelige en schaalbare mogelijkheid voor het vergroten van het aantal seriële poorten en uitbreiden van uw configuratie wanneer uw behoeften toenemen, zonder te investeren in een duurdere seriële hub.

Met volledige besturing van uw seriële componenten vanaf één apparaat is de USB seriële hub ideaal voor vele verschillende applicaties inclusief industriële automatisering, geautomatiseerde zelfbedieningskiosken en bewaking van camera's en beveiligingssystemen.

Ingebouwd gemak

De hub is voorzien van COM-poortretentie, die de toegewezen seriële COM-poortwaarden opslaat. Dit zorgt ervoor dat dezelfde waarden automatisch opnieuw worden toegewezen aan de poort die door de adapter beschikbaar wordt gesteld, voor het geval deze wordt losgekoppeld en opnieuw op de hostcomputer wordt aangesloten.

De hub is uitgerust met een betrouwbare FTDI USB-naar-seriële chipset, die de installatie in een breed scala aan besturingssystemen vergemakkelijkt.

Voldoet aan de eisen van industriële omgevingen

Dankzij het volledig metalen chassis past deze robuuste, rack mountable hub in standaard 19 inch serveropslag-racks en vormt zo een efficiënte industriële seriële oplossing. De hub is geschikt voor een uitgebreid bedrijfstemperatuurbereik van -40 °C tot 85 °C, waardoor betrouwbare prestaties zelfs in de ruwste omgevingen zijn gegarandeerd. De USB-seriële hub kan worden gevoed zowel via een AC-adapter als via een klemmenblok.

De ICUSB23216FD wordt gedekt door een 2-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.

Toepassingen

  • Ideaal voor industriële automatisering in fabrieken en op de productievloer.
  • Biedt volledige bediening van de seriële componenten in uw serverruimte met één apparaat
  • Besturing en controle van bewakings- en beveiligingsapparaten en -systemen
  • Zelfbedieningsautomaten en seriële apparaten (in supermarkt, op vliegveld), zoals weegschalen, touchscreens, magnetische kaart-lezers, barcodescanners, bonprinters, labelprinters
  • POS-bediening van toetsenborden, geldladen, kassabonprinters, kaartlezers, weegschalen en op stangen verhoogde displays
  • Werkstation voor kasbedienden in een full-profile of low-profile versie voor de bediening van seriële apparaten zoals geldladen, kaartlezers, printers, toetsenblokken en pinpads, penpads

Partnernummers

  • Ingram Micro Netherlands 3330349
  • UPC 065030864763

Compatibility

  • Windows 8 logo
  • Linux logo
  • Windows 7 logo
  • Windows Server 2012 logo
  • Windows 10 logo
  • macOS Sierra (10.12) logo
  • macOS Mojave (10.14) logo
  • macOS High Sierra (10.13) logo
  • Windows Server 2019 logo
  • Windows Server 2019 logo
  • macOS Catalina (10.15) logo
Windows® CE (4.2, 5.0, 6.0), XP Embedded, 98SE, 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016, 2019
macOS 10.6 tot 10.15
Linux Kernel 3.0.x tot 5.4.x (Alleen LTS-Versies)

Specificaties

Warranty Information Warranty 2 Years
Connector(en) Type connector(en) 16 - DB-9 (9-polig, D-Sub)
1 - USB B (4-polig)
Fysieke eigenschappen Kleur Zwart
Type behuizing Staal
Lengte product 43 cm [16,9 in]
Breedte product 120 mm [4,7 in]
Hoogte product 4,5 cm [1,8 in]
Gewicht product 1550 g [54,7 oz]
Gebruiksomgeving Bedrijfstemperatuur -40°C to 85°C (-40°F to 185°F)
Opslagtemperatuur -65°C to 150°C (-85°F to 302°F)
Vochtigheid 20~80% RH (Non-condensing)
Hardware Poorten 16
Interface Serieel
Bus type USB 2.0
Poorttype Externe hub
Chipsetcode FTDI - FT232RL
Indicatoren LED-indicatoren 16 - Data ontvangen
16 - Data zenden
Prestaties Maximale overdrachtsnelheid 480 Mbit/s
Seriële protocol RS-232
Max. baudrate 921,6 kbit/s
Databits 7, 8
FIFO 256 Bytes
Pariteit Odd, Even, Mark, Space, None
Stopbits 1, 2
MTBF 49,337 hours
Software Besturingssystemen Windows® CE (4.2, 5.0, 6.0), XP Embedded, 98SE, 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016, 2019
macOS 10.6 tot 10.15
Linux Kernel 3.0.x tot 5.4.x (Alleen LTS-Versies)
Verpakkingsinformatie Package Height 61 mm [2,4 in]
Package Length 45,1 cm [17,8 in]
Verzendgewicht (verpakt) 2,3 kg [5,1 lb]
Package Width 21,5 cm [8,5 in]
Voeding Inclusief voedingsadapter Inclusief wisselstroomadapter
Ingangsspanning 100 - 240 AC
Ingangsstroom 1.5 A
Uitgangsspanning 12V DC
Uitgangsstroom 3 A
Polariteit pin midden Positief
Stekkertype N
Vermogensopname 36
Wat wordt er meegeleverd Meegeleverd 1 - 16-poorts USB naar RS232 hub
1 - USB-kabel
2 - rack montagesteunen
8 - rack montageschroeven
2 - DIN-rail montagebeugels
4 - DIN-rail bevestigingsschroeven
4 - Onderlegringen
4 - Moeren
1 - Universele voedingsadapter (NA/JP, EU, GB, ANZ)
1 - Driver-CD
1 - klemmenblokstekker
1 - verkorte handleiding

Accessoires

MXT10010

Straight Through seriële kabel - M/F - 3 m

Verleng uw EGA-monitorkabel of muis kabel met 3 m

Uw prijs
€4,99 EUR excl.
€4,99 EUR incl.
MXT100

1,80m Standaard Seriële Kabel - DB9 M/F

Verleng uw EGA-monitorkabel of muiskabel met 1,80 m

Uw prijs
€3,99 EUR excl.
€3,99 EUR incl.
MXT100FF

1,8m seriële DB9 straight through kabel - F/F

Verbind twee DB9 seriële apparaten

Uw prijs
€3,99 EUR excl.
€3,99 EUR incl.
SCNM925FM

3 m gekruiste DB9 naar DB25 seriële nulmodemkabel - F/M

Voor het aansluiten van uw seriële apparaten en het verzenden van uw bestanden

Uw prijs
€4,99 EUR excl.
€4,99 EUR incl.
SCNM9FM

3m DB9 RS232 Seriële Nulmodemkabel F/M

Zet bestanden over via een seriële verbinding

Uw prijs
€4,99 EUR excl.
€4,99 EUR incl.
USB2HAB10

3m USB 2.0 gecertificeerde A naar B Kabel - M/M

Sluit USB 2.0 randapparatuur aan op uw computer

Uw prijs
€4,99 EUR excl.
€4,99 EUR incl.
USB2HAB2RA3

91 cm lange A rechtshoekige naar B rechtshoekige USB-kabel - M/M

Voor de aansluiting van USB 2.0 randapparaten op uw computer, voor installatie in nauwe ruimtes

Uw prijs
€4,99 EUR excl.
€4,99 EUR incl.

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Drivers:

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Troubleshooting

When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Serial cables

  • Serial ports

  • Serial devices

To test your setup components, try the following:

  • Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup.

  • Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the serial ports and serial device, it is recommended that you do the following:

Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4.

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:

  1. If your serial port is not female, convert it by taking a female/female cable or gender changer and plugging it into the serial port.
  2. Take a metal paperclip or wire and cross pins 2 and 3. If you look closely at the female end, the pins should be numbered.
  3. Open a telnet session on the COM port number of the device that you are testing. To find out the COM port number, refer to the following FAQ: https://www.startech.com/faq/com-port-listing-windows.

Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.

  1. When the session is open, anything you type into it you should see. The loopback test fails when you cannot see what you are typing.

If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port. 

You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session.  When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.

Installatie

Some driver installation packages may require you to disable driver signature enforcement in Windows 8, which will allow unsigned driver packages to be installed on your system.

Note: Before you continue, save any open documents and close all open programs.

To disable driver signature enforcement, complete the following:

  1. Press the Windows key + C.
  2. Click Settings > Change PC Settings.
  3. In the left pane, click General.
  4. In the right pane, under Advanced startup, click Restart now.

When your system finishes restarting, complete the following:

  1. Click Troubleshoot > Advanced options > Startup Settings > Restart.
  2. Press 7.

When your computer restarts, driver signature enforcement will be disabled and you can install your drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.

You may need to disable Driver Signature Enforcement in Windows 10 to use some driver installation packages. When you disable this feature, you can install unsigned driver packages on your computer.

Note: Before you continue, save any open documents and close all of your programs. You will need to restart your computer to disable Driver Signature Enforcement.

To disable Driver Signature Enforcement, complete the following:

  1. Click the Windows icon in the taskbar.
  2. Click Power.
  3. Press and hold the Shift key and click Restart.

After your computer finishes restarting, complete the following:

  1. Click Troubleshoot Advanced Options Startup Settings > Restart.
  2. Press 7.   

When your computer finishes restarting, Driver Signature Enforcement will be disabled and you can install the drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.­­­­­­­

Some driver installation packages may require you to disable driver signature enforcement in Windows 8.1, which will allow unsigned driver packages to be installed on your system.

Note: Before you continue, save any open documents and close all open programs.

To disable driver signature enforcement, complete the following:

  1. Press the Windows key + C.
  2. Click Settings > Change PC Settings.
  3. In the left pane, click Update & Recovery.
  4. In the left pane, click Recovery.
  5. Under Advanced startup, click Restart now.

When your system finishes restarting, complete the following:

  1. Click Troubleshoot > Advanced options > Startup Settings > Restart.
  2. Press 7.

When your computer restarts, driver signature enforcement will be disabled and you can install your drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.­­­­­­­

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Open the appropriate folder for your operating system.
  3. Double-click Setup.exe.
  4. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  5. Your computer will automatically complete the driver installation and your device should be ready to use.

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Open the appropriate folder for your operating system.
  3. Right-click Setup.exe. 
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. Your computer will automatically complete the driver installation and your device should be ready to use.

Hoe gaat u te werk

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven