4-poort RS232 Mini PCI Express Seriële Kaart met 16650 UART

Voeg vier RS232 seriële poorten toe aan een geïntegreerd systeem via een mini PCI Express-slot

Productcode: MPEX4S552

  • Vier high-speed RS232 seriële poorten met overdrachtsnelheden tot 921,6 kbit/s
  • High-performance 16550 UART
  • Inclusief vier IDC-naar-DB9 seriële kabels van 30cm
Uw prijs
€141,99 EUR excl. BTW
€171,81 EUR incl. BTW
De 4-poort MPEX4S952 RS232 Mini PCI Express Seriële Kaart (16650 UART) maakt van een mini-PCI-E-slot vier RS232 (DB9) seriële poorten met overdrachtsnelhden tot 921,6 kbit/s – een kostenbesparende oplossing voor het toevoegen van seriële functionaliteit aan geïntegreerde systemen. De kaart is voorzien van native PCI Express met enkele chip, waarmee de volledige capaciteit van de PCI Express-bus wordt benut, de snelheid en betrouwbaarheid wordt verhoogd en de belasting op de CPU met maar liefst 48% wordt verminderd ten opzichte van seriële kaarten met conventionele bridge-chip. Met levenslange garantie en gratis technische ondersteuning door StarTech.com.

Toepassingen

  • Voeg seriële poorten toe aan industriële geïntegreerde computers en systemen
  • Voeg RS232 seriële bediening toe aan een geïntegreerde mediaserver / mediacenter / alles-in-één-pc
  • Voeg extra poorten toe aan slimline POS-systemen

Het voordeel van StarTech.com

  • De kleinste beschikbaar vormfactor voor het intern toevoegen van seriële poorten aan een geïntegreerd systeem
  • Native ontwerp met enkele chip betekent een 48% lagere CPU-belasting, dat van cruciaal belang is voor kleine geïntegreerde pc's met een laag stroomverbruik en lage kloksnelheid

Partnernummers

  • Ingram Micro Netherlands 1861255
  • UPC 065030844611

Compatibility

  • Windows 7 logo
  • Windows Server 2012 logo
  • Linux logo
  • Mac OS X Yosemite (10.10) logo
  • Windows Server 2016 logo
  • Windows Server 2019 logo
Windows® DOS, 95, 98SE, 2000, CE 5.0/6.0, Embedded System 2009, POS Ready 2009, XP Embedded, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Mac OS® 10.4 to 10.10
Linux 3.5.x to 4.11.x LTS Versions Only

Specificaties

Warranty Information Warranty Lifetime
Connector(en) 1 - Type connector(en) Mini PCI Express x1 (52 pin)
4 - Externe poorten DB-9 (9 pin, D-Sub)
Fysieke eigenschappen Kleur Green
Type behuizing Steel
Lengte product 51,0 mm [2,0 in]
Breedte product 10 mm [0,4 in]
Hoogte product 3 cm [1,2 in]
Gewicht product 150 g [5,3 oz]
Gebruiksomgeving Bedrijfstemperatuur 0°C to 55°C (32°F to 131°F)
Opslagtemperatuur -20°C to 85°C (-4°F to 185°F)
Vochtigheid 5% tot 95% rel. luchtvochtigheid
Hardware Poorten 4
Interface Serial
Bus type Mini PCI Express
Kaarttype Embedded
Poorttype Dongle (Included)
Industriestandaarden PCI Express Base Specification, Revision 1.1
Chipsetcode ASIX - MCS9904CV-AA
Prestaties Seriële protocol RS-232
Max. baudrate 921.6 Kbps
Databits 5, 6, 7, 8
FIFO 256 Bytes
Flow-control Geen, Xon/Xoff, RTS/CTS
Pariteit None, Odd, Even, Space, Mark
Stopbits 1, 1.5, 2
Software Besturingssystemen Windows® DOS, 95, 98SE, 2000, CE 5.0/6.0, Embedded System 2009, POS Ready 2009, XP Embedded, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Mac OS® 10.4 to 10.10
Linux 3.5.x to 4.11.x LTS Versions Only
Verpakkingsinformatie Package Height 40 mm [1,6 in]
Package Length 21,2 cm [8,3 in]
Package Width 14,5 cm [5,7 in]
Verzendgewicht (verpakt) 0,2 kg [0,4 lb]
Wat wordt er meegeleverd 1 - Meegeleverd 4-poort Mini PCI-E Seriële Kaart
Driver-CD
Handleiding
4 - Meegeleverd DB9-bandkabel

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Drivers:

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.
  3. Right-click PCI Serial Port, which will have “!” or “?” next to it to indicate a driver issue.
  4. Click Update Driver.
  5. On the Hardware Update Wizard screen, click Install from a list or specific location (Advanced), and then click Next.
  6. Select the Don’t search, I will choose the driver to install option, and then click Next.
  7. On the Hardware Type screen, click Show All Devices, and then click Next.

Note: The Hardware Type screen does not appear on all systems. If you do not see this screen, skip this step.

  1. On the Select the Device Driver you want to install for this hardware screen, select the Have Disk option.
  2. In the Install from Disk dialog box, click Browse.
  3. Browse to the Windows folder, select the folder for your operating system, and open the 32-bit or the 64-bit folder, depending on your system type.

Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  1. Click the OxMf or OxPCIeMf file. Click OK, and then click Next.

Note: If you are using a serial card that uses the OxPCIeMf file and installation fails, repeat steps 4 to 10, then browse to the Windows folder. Browse to the Serial Port Driver folder and click the oxserleg file.  Click OK, and then click Next.

Troubleshooting

When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Serial cables

  • Serial ports

  • Serial devices

To test your setup components, try the following:

  • Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup.

  • Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the serial ports and serial device, it is recommended that you do the following:

Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4.

To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:

  1. If your serial port is not female, convert it by taking a female/female cable or gender changer and plugging it into the serial port.
  2. Take a metal paperclip or wire and cross pins 2 and 3. If you look closely at the female end, the pins should be numbered.
  3. Open a telnet session on the COM port number of the device that you are testing. To find out the COM port number, refer to the following FAQ: https://www.startech.com/faq/com-port-listing-windows.

Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.

  1. When the session is open, anything you type into it you should see. The loopback test fails when you cannot see what you are typing.

If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port. 

You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session.  When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.

Hoe gaat u te werk

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your expansion card, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your expansion card is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Wacht...
Terug naar boven