1-poort eSATA + 1-poort SATA PCI SATA Controller-kaart met LP-bracket

Voeg een interne SATA-poort en een externe SATA-poort (eSATA) toe aan uw desktopcomputer via een PCI-uitbreidingsslot

Productcode: PCIESATA2I

  • 1 interne SATA-poort en 1 externe eSATA-poort
  • Ondersteuning voor opslagmedia met hoge capaciteit door 48-bits Logical Block Addressing (LBA)
  • Volledig compatibel met de Serial ATA 1.0a specificaties met overdrachtsnelheden tot 1,5 Gbit/s
Uw prijs
€26,99 EUR excl. VAT
€32,66 EUR incl. VAT

Deze PCI SATA-controller-kaart stelt u in staat een PCI-slot om te zetten in een interne SATA- en een externe SATA-aansluiting (eSATA). Met ondersteuning van SATA-150 harde schijven en overdrachtsnelheden tot 1,5 Gbit/s is deze controller-kaart de perfecte oplossing als u een extra SATA-poort nodig hebt of als u uw gegevensopslag wilt externaliseren.

Toepassingen

  • Breid een op PCI gebaseerde computer uit met SATA- en eSATA-capaciteiten
  • Voeg extra SATA-capaciteit toe aan een desktopcomputer
  • Voeg SATA-capaciteit toe aan een low profile computer met kleine vormfactor

Het voordeel van StarTech.com

  • Ondersteunt harde schijven groter dan 136 GB met 48-bits LBA en SATA-overdrachtsnelheden tot 1,5 Gbit/s
  • Zowel een interne als externe SATA-poort en de mogelijkheid tot een standaard- en low profile / half-height-installatie voor een flexibele SATA-uitbreiding
  • Met 2-jaar garantie en gratis levenslange technische ondersteuning door StarTech.com

Partnernummers

  • Ingram Micro Netherlands 1600816
  • UPC 065030833851

Compatibility

  • Windows 8 logo
  • Windows 7 logo
  • Linux logo
Windows® 2000, XP, Vista, 7, 8
Windows Server® 2003, 2008 R2
Linux 3.5.x to 4.11.x LTS Versions only

Specificaties

Warranty Information Warranty 2 Years
Connector(en) Type connector(en) 1 - PCI / PCI-X (universeel 3,3 & 5 V, 32-bits)
Interne poorten 1 - SATA (7-polig, data)
Externe poorten 1 - eSATA (7-polig, data)
Fysieke eigenschappen Type behuizing Staal
Lengte product 12,1 cm [4,8 in]
Breedte product 54 mm [2,1 in]
Hoogte product 2 cm [0,8 in]
Gewicht product 46,6 g [1,6 oz]
Hardware Poorten 2
Interface eSATA & SATA
SATA
Bus type PCI / PCI-X (5 / 3.3V)
Kaarttype Standaard bracket (incl. low profile bracket)
Chipsetcode VIA/VLI - VT6421
Prestaties Maximale overdrachtsnelheid 1,5 Gbit/s
Type en snelheid SATA I (1.5 Gbps)
Port-multiplier Nee
RAID Nee
Software Besturingssystemen Windows® 2000, XP, Vista, 7, 8
Windows Server® 2003, 2008 R2
Linux 3.5.x to 4.11.x LTS Versions only
Verpakkingsinformatie Verpakkingsaantal 1
Package Length 17,5 cm [6,9 in]
Package Width 14,2 cm [5,6 in]
Package Height 30 mm [1,2 in]
Verzendgewicht (verpakt) 0,1 kg [0,3 lb]
Wat wordt er meegeleverd Meegeleverd 1 - PCI eSATA-kaart
1 - SATA-datakabel
1 - Low-profile bracket
1 - Software-CD
1 - Handleiding

Accessoires

ESATA3

90cm Afgeschermde Externe eSATA Kabel M/M

Sluit uw externe SATA-opslagapparaten aan op uw laptop of desktopcomputer.

Uw prijs
€7,99 EUR excl. VAT
€9,67 EUR incl. VAT
ESATA6

1.8m afgeschermde externe eSATA kabel - M/M

Sluit uw externe SATA-opslagapparaten aan op uw laptop of desktopcomputer.

Uw prijs
€10,99 EUR excl. VAT
€13,30 EUR incl. VAT

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Drivers:

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Voor uw aanschaf

Although you can adapt a Serial Attached SCSI (SAS) drive to connect to a standard SATA controller card, the card must support SAS commands in order to communicate with SAS drives. SAS drives have a different command set that is not present on SATA controllers.

This SATA controller card only supports standard SATA drives.

Yes. This PCI card uses a universal connector keyed for both 3.3V and 5V that can be used with PCI and PCI-X. This type of connector is identified as having 2 separate notches, instead of just one.

This device does not support the ATA Packet Interface (ATAPI) protocol. ATAPI is required for optical drives, including CD-ROM drives, DVD-ROM drives, and Blu-ray players. Because this device does not support ATAPI, optical drives are also not supported over any IDE, SATA, or eSATA connections.

For a list of products that do support ATAPI, refer to the following FAQ: https://www.startech.com/faq/hard_drive_controllers_atapi_support.

Hoe gaat u te werk

In order to use a hard drive plugged into a hard drive controller card as your operating system, you need to install the operating system onto the hard drive while it is plugged into the expansion card. To do this, complete the following:

Note: Not all hard drive controller cards have drivers that allow you to install the operating system onto the hard drive. All of the hard drive controllers that display this FAQ include this capability.

Before you begin, consult the documentation that came with the motherboard to make sure that the motherboard or BIOS supports booting from an expansion card.

  1. Back up any data on the hard drive.
  2. Make a copy of the drivers from the website onto a floppy disc, CD, DVD, or USB flash drive. The drivers that you download depends on the operating system that you want to install.
  3. Install the hard drive controller card onto your motherboard.
  4. Plug the hard drive into the controller card.
  5. Turn on your computer and open the operating system install wizard.
  6. Before you select the hard drive that you want to install the operating system onto, select the option to install third-party drivers.
  7. Point the driver installer to the floppy disc, CD, DVD, or USB flash drive.
  8. Install the drivers.
  9. Select the hard drive on the hard drive controller card as the location where you want to install the operating system.
  10. Complete the on-screen instructions to finish installing the operating system.

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Installatie

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. In the list of extracted files, right-click the Setup.exe file and click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in step 2.

  1. Complete the instructions to install the device drivers, and restart your computer when prompted to.

Your computer will automatically complete the driver installation and your device should be ready to use.

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. In the list of extracted files, double-click the Setup.exe file.
  3. Complete the instructions to install the device drivers, and restart your computer when prompted to.

Your computer will automatically complete the driver installation and your device should be ready to use.

Troubleshooting

When you troubleshoot issues with a hard drive controller card, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • IDE, SATA, and eSATA cables

  • Hard drives

  • Hard drive controller card

To test your setup components, try the following:

  • Use the IDE, SATA, or eSATA cable, hard drive, and hard drive controller card in another setup to see if the problem is with the components or the setup.

  • Use a different IDE, SATA, or eSATA cable, hard drive, and hard drive controller card in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the hard drive and hard drive controller card, it is recommended that you do the following:

  1. To open the Device Manager, press the Windows key + R, type devmgmt.msc, and press Enter. Check the IDE ATA/ATAPI controllers (for IDE) section, or the Storage controllers (for SATA) section.

  2. Do one of the following:

Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.

  1. To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter. Check to see if your hard drive is listed.

  2. If the hard drive is listed as healthy but does not have a drive letter, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.

Note: A formatted hard drive does not show up in Computer or My Computer until it has a drive letter assigned to it.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven