Productcode: PEX2S5531P
De PEX2S5531P 2S1P PCI Express combokaart zet een PCI Express-slot om naar twee RS232 (DB9) seriële poorten en een parallelle poort. De adapterkaart is voorzien van native PCI Express met enkele chip, waarmee de volledige capaciteit van PCI Express (PCI-E) wordt benut, de snelheid en betrouwbaarheid wordt verhoogd en de belasting op de CPU met maar liefst 48% wordt verminderd ten opzichte van seriële kaarten met een conventionele bridge-chip.
Deze 2-poort Seriële 1-poort Parallelle PCI Express-kaart is compatibel met een verscheidenheid aan besturingssystemen, waaronder Windows® 2000/XP/2003/Vista/Windows 7/Server 2008 R2 (32-bit en 64-bit), Linux Kernel 2.6.11 en hoger, en MAC OS 10.4, en beschikt tevens over een optionele low profile/half-height bracket, waarmee de kaart in vrijwel elke computer kan worden geïnstalleerd, ongeacht de vormfactor van de behuizing.
Dit product geldt als vervanging voor onze PEX2S5521P-kaart.
Met levenslange garantie en gratis technische ondersteuning door StarTech.com.
Warranty Information | Warranty | 2 Years |
---|---|---|
Connector(en) | 1 - Type connector(en) | PCI Express x1 |
1 - Interne poorten | LP4 (4-polig; Molex-type Large Drive Power) | |
1 - Externe poorten | DB-25 (25-polig, D-Sub) | |
2 - Externe poorten | DB-9 (9-polig, D-Sub) | |
Fysieke eigenschappen | Gewicht product | 112 g [4,0 oz] |
Type behuizing | Staal | |
Lengte product | 10,5 cm [4,1 in] | |
Breedte product | 12 cm [4,7 in] | |
Hoogte product | 20 mm [0,8 in] | |
Gebruiksomgeving | Bedrijfstemperatuur | -10°C to 80°C (14°F to 176°F) |
Opslagtemperatuur | -20°C to 100°C (-4°F to 212°F) | |
Vochtigheid | 5% - 85% rel. luchtvochtigheid | |
Hardware | Poorten | 2 |
Interface | Parallel | |
Serieel | ||
Bus type | PCI Express | |
Kaarttype | Standaard bracket (incl. low profile bracket) | |
Poorttype | Geïntegreerd op kaart | |
Industriestandaarden | PCI Express basisspecificaties revisie 1.0a | |
IEEE1284 | ||
Chipsetcode | ASIX - MCS9901CV-CC | |
Prestaties | Maximale overdrachtsnelheid | RS232 - 460,8 kbit/s Parallel - 1,5 Mbit/s |
Seriële protocol | RS-232 | |
Max. baudrate | 460,8 kbit/s | |
FIFO | 128 Bytes | |
Ondersteunde protocollen | EPP, ECP, SPP, PS/2 | |
Software | Besturingssystemen | Windows® DOS, 95, 98SE, 2000, POS Ready 2009, Embedded System 2009, CE 5.0/6.0, XP Embedded, 2000, XP, Vista, 7, 8, 8.1, 10 Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016, 2019 Mac OS X® 10.4 tot 10.9 Linux 3.5.x tot 4.11.x Alleen LTS-versies |
Speciale opmerkingen / vereisten | Notitie | Selecteerbare voedingsuitgang op pin-9 van de seriële poort |
Verpakkingsinformatie | Package Height | 31 mm [1,2 in] |
Package Length | 17,4 cm [6,9 in] | |
Verzendgewicht (verpakt) | 208 g [7,3 oz] | |
Package Width | 14,5 cm [5,7 in] | |
Wat wordt er meegeleverd | 1 - Meegeleverd | 2-poort PCI Express Seriële Kaart |
Parallelle poort (met bandkabel) | ||
3 - Meegeleverd | Low-profile brackets | |
1 - Meegeleverd | Driver-CD | |
Handleiding |
Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).
To install the driver:
Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).
Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.
Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).
To install the driver:
Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).
Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).
Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).
Note: The Select your device’s type from the list below screen does not appear on all systems. If you do not see this screen, skip this step.
Note: To view your system type, press Windows key + R, type control /name microsoft.system, and press Enter.
Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).
Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).
Note: The Hardware Type screen does not appear on all systems. If you do not see this screen, skip this step.
Note: To view your system type, press Windows key + R, type control /name microsoft.system, and press Enter.
To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:
Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.
If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port.
You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session. When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.
When you troubleshoot issues with a serial or parallel hybrid device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Serial or parallel cables
Serial or parallel ports
Serial or parallel devices
To test your setup components, try the following:
Use the serial or parallel cable, serial or parallel port, and serial or parallel device in another setup to see if the problem is with the components or the setup.
Use a different serial or parallel cable, serial or parallel port, and serial or parallel device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the serial or parallel ports and serial or parallel device, it is recommended that you do the following:
Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. Check to see if your device is listed under Ports (COM & LPT).
Make sure that the COM or LPT port number is the correct number for the serial or parallel device and that the software being used to connect the computer to the serial or parallel device uses the correct COM or LPT port number.
If you do not see the COM or LPT port number in Device Manager see this FAQ for PCI/PCIe expansion cards: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#pci-pcie-cannot-boot-os-or-detect-windows
or this FAQ for USB devices: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#usb-cannot-detect-windows
If the device is listed with an error, follow the instructions on the website to reinstall the drivers.
Note: Some serial devices work only if the COM or LPT port number is between a certain range. For example, COM1 to COM4 for serial and LPT1 and LPT2 for parallel.
Perform a serial loopback test. See this FAQ on how to perform a RS-232 serial loopback test: http://www.startech.com/faq/serial_loopback_test_rs232_windows
Note: There is not an equivalent loopback test that can be performed for parallel devices.
To confirm that Windows detects your expansion card, complete the following:
Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
To confirm that the Mac OS detects your expansion card, complete the following:
Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
Serial cards derive power from the PCI or PCI Express slot on the motherboard. When you power serial devices from the serial card ports, the power provided by the slot may not be enough to power all of the devices and you should connect additional sources of power from the power supply. When you troubleshoot issues, you should connect an additional source of power.
Some signs that you are experiencing power-related issues include certain devices not working correctly, not all of the devices working at the same time, and certain devices not working at all.