Niet meer leverbaar

2-poort Native PCI Express RS232 Seriële Adapterkaart met 16950 UART

Voeg twee RS-232 seriële poorten toe aan uw full-size of low profile computer via een PCI Express-slot

Productcode: PEX2S952

  • VERVANGEN DOOR PEX2S953; Voeg 2 RS-232 seriële poorten toe aan uw volledige of low profile computer via een PCI Express slot
  • Voldoet aan de PCI Express-specificatie rev. 1.0a
  • Twee high-speed RS-232 seriële poorten met overdrachtsnelheden tot 460,8 kbit/s

De PEX2S952 PCI Express seriële adapterkaart zet een PCI Express-slot om naar twee RS-232 (DB9) seriële aansluitingen.

De adapterkaart is voorzien van een native ontwerp met enkele chip, waarmee u de volledige capaciteit van PCI Express (PCI-E) benut voor een optimale snelheid en betrouwbaarheid en waarmee de belasting op de CPU met maar liefst 48% wordt verminderd ten opzichte van seriële kaarten met een conventionele bridge-chip.

De RS232 seriële adapterkaart is compatibel met een verscheidenheid aan besturingssystemen inclusief Windows® en Linux (Kernel 2.6.11 tot 4.11.x).

De kaart bevat bovendien een optionele half-height/low profile bracket waarmee de kaart kan worden geïnstalleerd in wat voor PCI Express-slot dan ook - dat maakt het zoveel gemakkelijker seriele poorten toe te voegen aan een computer met PCI Express, ongeacht de grootte van de computerbehuizing

Met levenslange garantie en gratis technische ondersteuning door StarTech.com

Toepassingen

  • Zelfbedieningsautomaten en seriële apparaten, zoals weegschalen, touchscreens, magnetische kaart-lezers, barcodescanners, bonprinters, labelprinters
  • POS-toepassingen in supermarkten of ander winkels voor het aansturen van toetsenborden, kassalades, bonprinters, kaartlezers, weegschalen en verhoogde uitstallingen
  • Werkplekken aan de balie van een bank in standaard of low profile versies, voor het aansturen van de seriële apparatuur zoals kassalades, kaartlezers, printers, toetsenborden / pinapparaten, pentabletten
  • Standaard geldautomaten voor het aansturen van toetsenborden, bonprinters, kaartlezers, de controle touchscreen LCD's, camerabesturing, etc.
  • Besturing van meerdere bewakings- / beveiligingscamera's in parkeergarages, kantoren, etc.

Het voordeel van StarTech.com

  • Overdrachtsnelheden tot 460 kbit/s voor een optimale prestatie van seriële apparaten
  • Native één-kanaals PCI Express met een enkele chip biedt een hogere snelheid en een tot 48% lagere CPU-belasting
  • De meegeleverde standaard- en low profile-brackets zorgen voor een eenvoudige installatie in vrijwel elk systeem

Partnernummers

  • Ingram Micro Netherlands 1598284
  • Tech Data - Netherlands 4428566
  • UPC 065030831581

Compatibility

  • Windows 8 logo
  • Linux logo
  • Windows Server 2012 logo
  • Windows 7 logo
  • Windows 10 logo
  • Windows 11 logo
  • Windows Server 2016 logo
  • Windows Server 2019 logo
Windows® CE 6.0 / 5.0, 95, 98SE, 2000, XP, XP Embedded, Vista, 7, 8, 8.1, 10, 11
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016, 2019
Linux 2.4.x tot 4.11.x Alleen LTS-versies

Specificaties

Warranty Information Warranty Lifetime
Connector(en) 1 - Type connector(en) PCI Express x1
1 - Interne poorten LP4 (4 pin; Large Drive Power)
2 - Externe poorten DB-9 (9 pin, D-Sub)
Fysieke eigenschappen Gewicht product 60.0 g [2.1 oz]
Kleur Green
Lengte product 90.0 mm [3.5 in]
Breedte product 65.0 mm [2.6 in]
Hoogte product 2.0 cm [0.8 in]
Gebruiksomgeving Bedrijfstemperatuur -10°C to 80°C (14°F to 176°F)
Opslagtemperatuur -20°C to 100°C (-4°F to 212°F)
Vochtigheid 5~85% RH
Hardware Poorten 2
Interface Serial
Bus type PCI Express
Kaarttype Standard Profile (LP bracket incl.)
Poorttype Integrated on Card
Chipsetcode PLX/Oxford - OXPCIe952
Prestaties Seriële protocol RS-232
Max. baudrate 460.8 Kbps
Databits 4, 5, 6, 7, 8
FIFO 128 Bytes
Stopbits 1, 1.5, 2
MTBF 87,600 Hours
Software Besturingssystemen Windows® CE 6.0 / 5.0, 95, 98SE, 2000, XP, XP Embedded, Vista, 7, 8, 8.1, 10, 11
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016, 2019
Linux 2.4.x tot 4.11.x Alleen LTS-versies
Speciale opmerkingen / vereisten Notitie Selecteerbare voedingsuitgang op pin-9 van de seriële poort
Verpakkingsinformatie Package Height 33.0 mm [1.3 in]
Package Length 14.5 cm [5.7 in]
Verzendgewicht (verpakt) 152.0 g [5.4 oz]
Package Width 17.5 cm [6.9 in]
Wat wordt er meegeleverd 1 - Meegeleverd 2-poort Seriële Kaart
Driver-CD
Handleiding
2 - Meegeleverd Low-profile bracket

Accessoires

AT925FM

DB9 naar DB25 seriële adapterkabel - F/M

Verander een DB9 mannelijke poort in een DB25 mannelijke poort

Uw prijs
€3,99 EUR excl. BTW
€4,83 EUR incl. BTW
AT925FF

DB9-naar-DB25 seriële kabeladapter - F/F

Verandert een DB9 mannelijke poort in een DB25 vrouwelijke poort

Uw prijs
€3,99 EUR excl. BTW
€4,83 EUR incl. BTW

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.
  3. Right-click PCI Serial Port, which will have a “!” or “?” next to it to indicate a driver issue.
  4. Click Update Driver.
  5. Click Browse my computer for driver software.
  6. Select the Let me pick from a list of device drivers on my computer option.
  7. On the Select your device’s type from the list below screen, click Show All Devices, and click Next.

Note: The Select your device’s type from the list below screen does not appear on all systems. If you do not see this screen, skip this step.

  1. Select the Have Disk option.
  2. Browse to the Windows folder, select the folder for your operating system, and open the 32-bit or the 64-bit folder, depending on your system type.

Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  1. Click the OxMf or OxPCIeMf file. Click OK, and then click Next.

Note: If you are using a serial card that uses the OxPCIeMf file and installation fails, repeat steps 4 to 9, then browse to the Windows folder. Browse to the Serial Port Driver folder and click the oxserleg file.  Click OK, and then click Next.

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.
  3. Right-click PCI Serial Port, which will have “!” or “?” next to it to indicate a driver issue.
  4. Click Update Driver.
  5. On the Hardware Update Wizard screen, click Install from a list or specific location (Advanced), and then click Next.
  6. Select the Don’t search, I will choose the driver to install option, and then click Next.
  7. On the Hardware Type screen, click Show All Devices, and then click Next.

Note: The Hardware Type screen does not appear on all systems. If you do not see this screen, skip this step.

  1. On the Select the Device Driver you want to install for this hardware screen, select the Have Disk option.
  2. In the Install from Disk dialog box, click Browse.
  3. Browse to the Windows folder, select the folder for your operating system, and open the 32-bit or the 64-bit folder, depending on your system type.

Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  1. Click the OxMf or OxPCIeMf file. Click OK, and then click Next.

Note: If you are using a serial card that uses the OxPCIeMf file and installation fails, repeat steps 4 to 10, then browse to the Windows folder. Browse to the Serial Port Driver folder and click the oxserleg file.  Click OK, and then click Next.

Troubleshooting

When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Serial cables

  • Serial ports

  • Serial devices

To test your setup components, try the following:

  • Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup.

  • Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the serial ports and serial device, it is recommended that you do the following:

Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4.

To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:

  1. If your serial port is not female, convert it by taking a female/female cable or gender changer and plugging it into the serial port.
  2. Take a metal paperclip or wire and cross pins 2 and 3. If you look closely at the female end, the pins should be numbered.
  3. Open a telnet session on the COM port number of the device that you are testing. To find out the COM port number, refer to the following FAQ: https://www.startech.com/faq/com-port-listing-windows.

Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.

  1. When the session is open, anything you type into it you should see. The loopback test fails when you cannot see what you are typing.

If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port. 

You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session.  When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.

Hoe gaat u te werk

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Wacht...
Terug naar boven