Product Zoeken

Gigabit Cat6 Crossover Ethernet Adapter

Verander een Cat 6 Ethernet-kabel in een gigabit-crossoverkabel

Productcode: C6CROSSOVER

  • 1 RJ45 vrouwelijke connector
  • 1 mannelijke RJ45-connector
Uw prijs
€9,99 EUR excl. BTW
€12,09 EUR incl. BTW
Deze duurzame Cat6 Crossover-adapter zet een willekeurige standaard Cat6 Ethernet-kabel om in een Ethernet crossover-kabel. Alle vier de paren zijn gekruist, zodat de adapter de volle Gigabit-overdrachtsnelheid kan leveren.

Toepassingen

  • Verander een Cat 6 Ethernet-kabel in een gigabit-crossoverkabel

Het voordeel van StarTech.com

  • Gegarandeerde betrouwbaarheid, met StarTech.com’s levenslange garantie

Partnernummers

  • Ingram Micro Netherlands 1601256
  • Tech Data - Netherlands 4462632
  • UPC 065030831970

Specificaties

Warranty Information Warranty Lifetime
Connector(en) 1 - Connector A RJ-45
1 - Connector B RJ-45
Fysieke eigenschappen Gewicht product 12 g [0,4 oz]
Kleur Rood
Type geleider Gevlochten koper
Lengte product 45 mm [1,8 in]
Breedte product 15 mm [0,6 in]
Hoogte product 15 mm [0,6 in]
Hardware Aantal geleiders 8
Type kabelmantel PVC - Polyvinyl Chloride
Verpakkingsinformatie Package Height 19 mm [0,7 in]
Package Length 12,5 cm [4,9 in]
Verzendgewicht (verpakt) 14 g [0,5 oz]
Package Width 90 mm [3,5 in]
Wat wordt er meegeleverd 1 - Meegeleverd Gigabit Cat6 Crossover Ethernet Adapter

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Voor uw aanschaf

In order to work properly, straight-through Ethernet cables must be terminated with the same pin configurations on either end. Two different wiring standards exist for wired Ethernet: T568A (A wiring) and T568B (B wiring). A and B wiring offer the same electrical properties and either standard can be used. StarTech.com uses the T568B wiring standard for all of the straight-through Ethernet cables.

Note: For more information about the differences between straight-through and crossover Ethernet cables, refer to the following FAQ: http://www.startech.com/faq/network_cables_straight_through_vs_crossover.  

Wiring Pinout Table

Pin T568A T568B
1 white/green white/orange
2 green orange
3 white/orange white/green
4 blue blue
5 white/blue white/blue
6 orange green
7 white/brown white/brown
8 brown brown

Patch cables can come in two different wiring applications: straight-through and crossover. The type of cable that is required depends on the application. Straight-through Ethernet cables are the most commonly used.

Cable type Typical application
Straight-through
  • Between a computer and a modem, router, or switch
  • CAT5/CAT6 peripheral extenders
  • Between other dissimilar networking equipment
Crossover
  • Between two computers
  • Between two similar networking devices

Crossover cables use two different wiring standards: one end uses the T568A wiring standard, and the other end uses the T568B wiring standard. To determine if you have a straight-through or crossover cable, compare the Ethernet cables to see if the colors are wired in the same order on each end. For more information on Ethernet wiring standards, refer to the following FAQ: http://www.startech.com/faq/network_cables_a_vs_b_pinout.

Many modern network devices support Auto MDI-X, which automatically negotiates which wiring standard is required. For example, a computer with Auto MDI-X can use either a straight-through or crossover cable for any application.

Stranded Ethernet cables are flexible and are often used as patch cables, short cables that are ideal for connecting a computer to a wall outlet or to a router.  Solid Ethernet cables are rigid but have better signal strength.  These cables are ideal for use behind walls and in longer cable runs.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Wacht...
Terug naar boven