Cat5e RJ45 gevlochten modulaire stekkerconnector - verpakking met 50 stuks

Sluit uw Cat5 kabels af op precies de gewenste lengte

Productcode: CRJ4550PK

  • 50 Cat 5e RJ45 modulaire stekkers
  • Geschikt voor alle Cat5e patchkabels
Uw prijs
€33,99 EUR excl. BTW
€41,13 EUR incl. BTW

Deze bulkverpakking met Cat 5e RJ45 gevlochten modulaire stekkerconnectors bevat 50 categorie 5e RJ45-uiteinden voor het ter plaatse afsluiten van gevlochten draden.

De CRJ4550PK Cat5e-stekkers worden gedekt door de levenslange garantie van


  • Voor het ter plaatse afsluiten van uw Cat 5e patchkabels

Het voordeel van

  • Gemakkelijke verpakking met 50 Cat5e afsluitingen ter plaatse
  • Sluit uw Cat5e-kabels af op precies de gewenste lengte
  • Gegarandeerde betrouwbaarheid


  • Ingram Micro Netherlands 2398058
  • Tech Data - Netherlands 4428832
  • UPC 065030795319


Warranty Information Warranty Lifetime
Connector(en) 1 - Type connector(en) RJ-45
Fysieke eigenschappen Gewicht product 80,0 g [2,8 oz]
Kleur Transparent
Breedte product 1,3 cm [0,5 in]
Hoogte product 1,4 cm [0,6 in]
Lengte product 2,1 cm [0,8 in]
Verpakkingsinformatie Package Height 2,5 cm [1,0 in]
Package Length 22,5 cm [8,9 in]
Verzendgewicht (verpakt) 85,0 g [3,0 oz]
Package Width 12,5 cm [4,9 in]
Verpakkingsaantal 50
Wat wordt er meegeleverd 1 - Meegeleverd Cat5e RJ45 gevlochten modulaire stekkerconnector - verpakking met 50 stuks



Krimptang met kabelstripper voor RJ45 en RJ11

Krimp zowel RJ11 als RJ45 kabelconnectors met één gereedschap (met draadstripper)

Uw prijs
€51,99 EUR excl. BTW
€62,91 EUR incl. BTW


Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)




Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Voor uw aanschaf

In order to work properly, straight-through Ethernet cables must be terminated with the same pin configurations on either end. Two different wiring standards exist for wired Ethernet: T568A (A wiring) and T568B (B wiring). A and B wiring offer the same electrical properties and either standard can be used. uses the T568B wiring standard for all of the straight-through Ethernet cables.

Note: For more information about the differences between straight-through and crossover Ethernet cables, refer to the following FAQ:  

Wiring Pinout Table

Pin T568A T568B
1 white/green white/orange
2 green orange
3 white/orange white/green
4 blue blue
5 white/blue white/blue
6 orange green
7 white/brown white/brown
8 brown brown

Different categories of UTP (Unshielded Twisted Pair) cabling were created for better performance in certain applications. As a general rule, the higher the category number, the higher the noise reduction and lower attenuation, and consequently the higher the bandwidth. For example, CAT6 can handle higher data rates at longer distances than CAT5 can. Newer categories have been added since the original revision to achieve these higher data rates.

The most widely used cable for Ethernet is CAT5e, which is good for most gigabit Ethernet applications. offers CAT5e, CAT6, and CAT6a Ethernet cables.

Any cable type can be used in any application as long as it meets the transfer speeds required for the application.

The following table compares the UTP cable categories:

Category Typical Application Maximum frequency Maximum length for application
CAT5 10/100 Mbps Ethernet 100 Mhz

100 meters for 100BASE-T


10/100/Gigabit Ethernet

100 MHz

100 meters for 1000BASE-T

CAT6 Gigabit Ethernet 250 MHz

100 meters for 1000BASE-T

CAT6a 10-Gigabit Ethernet 500 MHz

100 meters for 10GBASE-T

Note: The performance of any UTP cable is dependent on the length used and how the cable is terminated.

Patch cables can come in two different wiring applications: straight-through and crossover. The type of cable that is required depends on the application. Straight-through Ethernet cables are the most commonly used.

Cable type Typical application
  • Between a computer and a modem, router, or switch
  • CAT5/CAT6 peripheral extenders
  • Between other dissimilar networking equipment
  • Between two computers
  • Between two similar networking devices

Crossover cables use two different wiring standards: one end uses the T568A wiring standard, and the other end uses the T568B wiring standard. To determine if you have a straight-through or crossover cable, compare the Ethernet cables to see if the colors are wired in the same order on each end. For more information on Ethernet wiring standards, refer to the following FAQ:

Many modern network devices support Auto MDI-X, which automatically negotiates which wiring standard is required. For example, a computer with Auto MDI-X can use either a straight-through or crossover cable for any application.

Stranded Ethernet cables are flexible and are often used as patch cables, short cables that are ideal for connecting a computer to a wall outlet or to a router.  Solid Ethernet cables are rigid but have better signal strength.  These cables are ideal for use behind walls and in longer cable runs.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven