1ft Low Profile SATA to eSATA Plate Adapter

Add an eSATA port to your PC, extended from internal Serial ATA connection port

Productcode: ESATAPLT1LP

  • 1x SATA Receptacle
  • 1x eSATA Plug
  • Supports full SATA 3.0 6Gbps bandwidth
Uw prijs
€4,99 EUR excl. VAT
€6,04 EUR incl. VAT
Waar te koop

The ESATAPLT1LP Low Profile SATA to eSATA plate adds external data support to any existing Serial ATA controller, allowing you to connect external SATA (eSATA) storage to a computer. With support for data transfer rates of up to 6Gbps, this external SATA plate allows you to take advantage of the increased data integrity provided by external hard drives or RAID devices that support eSATA connections.

The adapter plate can be mounted to the rear panel of the computer case, providing straightforward eSATA to SATA connections and allowing users to connect their eSATA device (hard drive enclosure, etc.) to the provided eSATA port which is an extension of the motherboard SATA data connector.

Constructed of only top quality materials and designed for optimum performance, and reliability the ESATAPLT1LP is backed by our lifetime warranty.

Toepassingen

  • Extend a SATA connection to a low profile plate, to enable connection of an eSATA storage device

Het voordeel van StarTech.com

  • Enables you to connect an external eSATA hard drive to a low profile PC
  • Adds an eSATA port to your desktop, providing an external, shielded connection port on the back of your PC
  • Backed by StarTech.com's lifetime warranty

Partnernummers

  • Ingram Micro Netherlands 1614001
  • Tech Data - Netherlands 4462514
  • UPC 065030831376

Specificaties

Warranty Information Warranty Lifetime
Connector(en) 1 - Connector A SATA (7-polig, data)
1 - Connector B eSATA (7-polig, data)
Fysieke eigenschappen Gewicht product 35 g [1,2 oz]
Kleur Rood
Stijl connector Recht
Kabellengte 30,5 cm [12,0 in]
Lengte product 30,5 cm [12,0 in]
Hardware Type kabelmantel PVC - Polyvinyl Chloride
Verpakkingsinformatie Verzendgewicht (verpakt) 35 g [1,2 oz]
Package Length 12,1 cm [4,8 in]
Package Width 18 mm [0,7 in]
Package Height 22,6 cm [8,9 in]
Wat wordt er meegeleverd 1 - Meegeleverd 1ft Low Profile SATA to eSATA Plate Adapter

Certificaties

View downloadable documentation
  • RoHS & REACH Certificate of Compliance logo
  • Waste Electrical and Electronic Equipment Directive (WEEE) logo
  • CE logo

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Troubleshooting

When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Hard disk drive

  • Hard drive controller (for example, motherboard)

  • SATA cable

To test your setup components, try the following:

  • Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.

  • Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:

  • Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.

  • If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.

For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.

opens in new window
Was this information helpful?

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven