6 ft Shielded eSATA to SATA Cable

Sluit eSATA-apparaten aan op een standaard SATA-poort

Productcode: SATA2ESATA6

  • Compliant with Serial ATA III Specifications
  • Supports data transfers of up to 6Gbps
Uw prijs
€9,99 EUR excl. VAT
€12,09 EUR incl. VAT

This 6ft Shielded eSATA to SATA Cable features one eSATA connector and one standard SATA connector, allowing you to connect external drives (with eSATA connector) to a regular Serial ATA data connector.

Backed by StarTech.com's Lifetime Warranty.

Het voordeel van StarTech.com

  • Allows eSATA Devices to be connected to SATA Ports
  • Easy to install and use
  • Increased perfomance with a data trasfer rate of up to 6Gps
  • Backed by StarTech.com lifetime warranty

Partnernummers

  • Ingram Micro Netherlands 1592305
  • Tech Data - Netherlands 4462415
  • UPC 065030819978

Specificaties

Warranty Information Warranty Lifetime
Connector(en) 1 - Connector A SATA (7-polig, data)
1 - Connector B eSATA (7-polig, data)
Fysieke eigenschappen Gewicht product 132 g [4.7 oz]
Kleur Zwart
Stijl connector Recht
Kabellengte 1.8 m [6.0 ft]
Lengte product 1.8 m [6.0 ft]
Hardware Type kabelmantel PVC - Polyvinyl Chloride
Prestaties Type en snelheid SATA III (6 Gbps)
Verpakkingsinformatie Package Height 15 mm [0.6 in]
Package Length 16 cm [6.3 in]
Verzendgewicht (verpakt) 136 g [4.8 oz]
Package Width 12 cm [4.7 in]
Wat wordt er meegeleverd 1 - Meegeleverd 6 ft Shielded eSATA to SATA Cable

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Troubleshooting

When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Hard disk drive

  • Hard drive controller (for example, motherboard)

  • SATA cable

To test your setup components, try the following:

  • Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.

  • Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:

  • Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.

  • If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.

For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.

Compliance and safety

Compliance letters

  • RoHS
    • Taal: English
  • WEEE
    • Taal: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven