StarTech.com

2-poorts PCI Express (PCIe x4) gigabit ethernet server netwerk- adapter kaart - Intel i350 NIC

Voeg twee Gigabit Ethernet-poorten toe aan een computer, server of werkstation via een PCI Express-slot

Productcode: ST2000SPEXI

  • Twee RJ-45 Ethernet-poorten met 10/100/1000 Mbit/s
  • Voldoet volledig aan IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE802.3ad (linkaggregatie) en ondersteunt IEEE 802.1Q VLAN tagging
  • Jumbo Frame ondersteuning tot 9k byte
Bekijk meer
  • Teamingondersteuning
  • Ondersteunt Checksum Offload (IP, TCP, UDP), Transmit Segmentation Offload (TCP, UDP) en Large Send Offload
  • Wake-on-LAN / Remote Wake-up ondersteuning
  • Geconfigureerd met standard-profile-steun, low-profile-/halfhoge steun meegeleverd
  • Ondersteunt Intel® Virtualisatietechnologie (VT-c, VMDq, SR-IOV)
  • Vierbaans (x4) PCI Express compatibel met x4, x8 en x16 PCIe-sleuven
  • Compatibel met PCI Express Base Specification 2.1 (achterwaarts compatibel met 1.0a/1.1)
181,99 € EUR exc BTW
220,21 € EUR inc BTW
Niet beschikbaar
Eventueel op voorraad bij partners
Waar te verkrijgen

Bezoek vandaag nog onze Europese online winkel voor meer producten zoals deze!

Overzicht

Dankzij de ST2000SPEXI PCI Express 2-poorts gigabitnetwerkkaart kunt u twee gigabit ethernetpoorten op een desktopcomputer aansluiten via een enkelvoudige, vierlaans (x4 of hoger) PCI Express-sleuf. Iedere poort is volledig compatibel met IEEE 802.3/u/ab-normen, voor 10/100/1000 Mbps auto-negotiation.

Deze 2-poorts GbE-netwerkkaart is gebaseerd op de krachtige Intel® I350 chipset, die verschillende geavanceerde driveropties biedt, zoals IEEE 802.3ad linkaggregatie/teamingondersteuning. Hierdoor kunt u uw systeem van extra bandbreedte voorzien. De ondersteuning voor Jumbo Frames, full-duplexgebruik en 802.1q VLAN tagging helpt tevens bij het creëren van een efficiënte netwerkconfiguratie.

Deze 2-poorts netwerkkaart is ook handig voor virtualisatietoepassingen (controleer uw VM-software voor de compatibiliteit van de chipset) of om een dual-homed hostconfiguratie op te zetten. Met deze kaart kunt u verschillende complexe netwerkscenario's opstellen om aan de behoeften van uw bedrijf te voldoen. Voor nog meer veelzijdigheid is de controllerkaart uitgerust met een standard-profile-steun, terwijl een low-profile-/halfhoge steun is meegeleverd voor installatie in kleine-vormfactorcomputers.

Gedekt door een 2-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.

StarTech.com Voordeel

  • Verdubbel de netwerkbandbreedte naar een enkelvoudig systeem via linkaggregatie/teamingondersteuning
  • Optimaliseer het netwerkverkeer door ondersteuning van geavanceerde kenmerken zoals Jumbo Frames en VLAN tagging
  • Maximaliseer de netwerkefficiency van uw gevirtualiseerde server met speciale poorten

Toepassingen

Ideaal voor VM-omgevingen met meerdere besturingssystemen die gedeelde of speciale NIC's vereisen

Zorgt voor redundantie in de connectiviteit om een ononderbroken netwerkverbinding zeker te stellen

Configureer een dual-homed proxy- of gatewaysysteem als extra beveiliging

Speciaal ontworpen voor desktop pc cliënten, servers en werkstations met weinig beschikbare PCI Express-sleuven

Technische specificaties

Garantie
Garantie 2 Years
Hardware
Bus type PCI Express
Chipsetcode Intel - I350-AM2
Industriestandaarden IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
PCI Express basisspecificatie 2.1
Interface RJ45 (gigabit Ethernet)
Kaarttype Standaard bracket (incl. low profile bracket)
Poorten 2
Poorttype Geïntegreerd op kaart
Prestaties
Auto MDIX Ja
Compatibele netwerken 10/100/1000 Mbps
Full duplex ondersteuning Ja
Jumbo Frame Support 9K max.
Maximale overdrachtsnelheid 2000 Mbps (full-duplex), 1000 Mbps (half-duplex)
Ondersteunde protocollen IEEE 802.3ad (link aggregation), IEEE 1588 (time sync) / 802.1AS, IEEE 802.1q (VLAN tagging)
Promiscuous Mode Ja
Connector(en)
Externe poorten 2 - RJ-45 Vrouwelijk
Type connector(en) 1 - PCI Express x4 Mannelijk
Software
Besturingssystemen Windows® 7, 8, 8.1, 10
Windows Server® 2008 R2, 2012, 2012 R2, 2016
Linux 2.4.x to 4.11.x LTS versions only
Speciale opmerkingen / vereisten
Systeem- en kabelvereisten Beschikbare PCI Express x4 of hoger (x8, x16) sleuf
Indicatoren
LED-indicatoren 2 - 10/100/1000 Mbps Indicator
2 - Koppeling/Activiteit
Gebruiksomgeving
Bedrijfstemperatuur 0°C to 50°C (32°F to 122°F)
Opslagtemperatuur -20°C to 60°C (-4°F to 140°F)
Vochtigheid 5% - 85% rel. luchtvochtigheid
Fysieke eigenschappen
Breedte product 19 mm [0.7 in]
Gewicht product 80 g [2.8 oz]
Hoogte product 121 mm [4.8 in]
Lengte product 67 mm [2.6 in]
Verpakkingsinformatie
Verzendgewicht (verpakt) 166 g [5.9 oz]
Wat wordt er meegeleverd
Meegeleverd 1 - 2-poorts netwerkkaart
1 - Low-profile bracket
1 - Driver-CD
1 - Handleiding

Compatibiliteit

Bekijk volledige OS compatibiliteit
Windows® 7, 8, 8.1, 10
Windows Server® 2008 R2, 2012, 2012 R2, 2016
Linux 2.4.x to 4.11.x LTS versions only

Certificaties

Verwante producten

Dual Port PCI Express Gigabit Ethernet PCIe-netwerkkaart adapter - PoE/PSE
ST2000PEXPSE
Dual Port PCI Express Gigabit Ethernet PCIe-netwerkkaart adapter - PoE/PSE

Voeg twee Power-over-Ethernet Gigabit-poorten toe aan een PCI Express-computer

181,99 € exc BTW
220,21 € inc BTW
4-poort PCI Express Gigabit Ethernet Netwerkkaart Adapter
ST1000SPEX42
4-poort PCI Express Gigabit Ethernet Netwerkkaart Adapter

Voeg vier Gigabit-netwerkaansluitingen toe aan een desktop-PC of server via een beschikbare PCI-Express x4 slot

299,99 € exc BTW
362,99 € inc BTW
USB 3.0 naar 2-poorts gigabit Ethernet-adapter NIC met USB-poort
USB32000SPT
USB 3.0 naar 2-poorts gigabit Ethernet-adapter NIC met USB-poort

Voeg twee gigabit Ethernet-poorten en een USB 3.0 pass-through-poort toe aan uw laptop via één USB 3.0 poort

77,99 € exc BTW
94,37 € inc BTW

Accessoires

Productondersteuning

Veelgestelde vragen (FAQ)

Installatie

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Open the appropriate folder for your operating system.
  3. Right-click on either Windows 32bit.exe or Windows 64bit.exe as appropriate for your operating system. 
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. Your computer will automatically complete the driver installation and your device should be ready to use.

Hoe gaat u te werk

StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met:

  1. The BIOS must support PXE.
  2. The BIOS must see the card.
  3. The environment must have drivers for the chipset used in the card.
  4. If using a USB networking card, the environment must have support for USB devices as well.

Virtual local area network (VLAN) tagging requires that the network interface card (NIC) and the router or switch that you use support protocol IEEE 802.1q.

Depending on the NIC, you can set your VLAN ID in Device Manager.  Not all NICs that support VLAN tagging have this option.

Setting your VLAN ID in Device Manager

Note: Log in as the local administrator before continuing.

To open Device Manager:

  • Press Windows key + R
  • Type devmgmt.msc
  • Click OK.
  1. In Device Manager, open Network adapters.
  2. Right-click on the NIC and choose Properties.
  3. Click the Advanced tab.
  4. Scroll down to VLAN ID.
  5. Set the ID that you would like the NIC to have and click OK.

Setting up your VLAN Tagging and Setting a VLAN ID

How you perform this task depends on your router or switch.  Consult the manual or manufacturer of your router or switch for more details.

In your router or switch, you can VLAN tag a device by the VLAN ID if you set one previously, or by the MAC address of the computer.  Your router or switch will list all IP devices by MAC address.

For most operating systems, network interface card (NIC) teaming requires that the NIC and the router or switch support the protocol IEEE 802.1ax or IEEE 802.3ad. 

Windows Server 2012, however, has native support for NIC teaming, so the NIC and the router or switch do not need to support the protocols. To configure NIC teaming in Windows Server 2012 do the following:

  1. Click Start.
  2. Click Server Management.
  3. Click NIC Teaming enabled.
  4. Set up the NIC team as you would like.

If you view the Networking Connections section in the window, you can see the NIC team in the list as well as the Ethernet and wireless adapter cards.

Troubleshooting

When you troubleshoot issues with a network adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Ethernet cables
  • Network devices
  • Computer system

To test your setup components, try the following:

  • Use the Ethernet cables, network devices, and computer system in another setup to see if the problem is with the components or the setup.
  • Use different Ethernet cables, network devices, and a different computer system in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.
  • Use short cables when you are testing.

When you test the Ethernet cables, network devices, and computer system, it is recommended that you do the following:

Sometimes an on-board network interface card (NIC) conflicts with a new NIC.  In these cases it is best to disable the on-board NIC.

The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible.  To do this, consult your motherboard manual.

You can also disable any NIC in Windows.  Here is how you do this:

First click Start, or, in Windows 10 and 8, hold down the Windows key and press X.  Then click Control Panel.

Windows 10

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows 8

  1. Click Network and Sharing Center.
  2. On the left, click Change adapter settings.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows 7

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows Vista

  1. Click Network and Sharing Center.
  2. On the left, click Manage network connections.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows XP

  1. Click Network Connections.
  2. Right-click the NIC that you would like to disable and select Disable.

If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings.  You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed.

Note: You must log in as the local administrator before you continue.

To open Device Manager:

  • Press Windows key + R.
  • Type devmgmt.msc.
  • Click OK.
  1. Open the Networking adapters section.
  2. Right-click the network adapter that you want to change and select Properties.
  3. Click the Advanced tab.
  4. Scroll down to Speed & Duplex. By default, it is set to Auto-Negotiate. Select any of the speeds that you see in the list.
  5. Click OK and restart your computer.