StarTech.com

USB 3.0 naar gigabit Ethernet NIC netwerkadapter met 3-poorts hub - wit

Voeg gigabit Ethernet-verbinding en 3 USB 3.0-hubpoorten toe aan een computer via één SuperSpeed USB 3.0-poort

Productcode: ST3300U3S

  • 10/100/1000 Mbps RJ45 Ethernet-poort
  • Voldoet aan alle IEEE 802.3, IEEE 802.3u, IEEE 802.3ab en IEEE 802.3az specificaties
  • Ondersteunt Auto-MDIX, Wake-on-LAN en Jumbo Frames
Bekijk meer
  • Crossover-detectie en automatische aanpassing (Auto MDI/MDI-X)
  • 3 SuperSpeed USB 3.0-poorten met een bandbreedte tot 5 Gbps
  • Achterwaarts compatibel met apparaten op USB 2.0 en USB 1.1/1.0
  • Gelijktijdige ondersteuning van USB 3.0/2.0/1.x apparaten
  • Voldoet aan alle USB 3.0 rev 1.0 specificaties
  • Plug-and-play en hot-swappable
69,99 € EUR exc BTW
84,69 € EUR inc BTW
Niet beschikbaar
Eventueel op voorraad bij partners
Waar te verkrijgen

Bezoek vandaag nog onze Europese online winkel voor meer producten zoals deze!

Overzicht

De ST3300U3S USB 3.0 gigabit netwerkadapter verandert één SuperSpeed USB 3.0 hostverbindingspoort in een RJ45 gigabit netwerkpoort en drie extra USB 3.0 poorten.

In tegenstelling tot een adapter op USB 2.0 basis kunt u met deze NIC op USB 3.0 basis verbinding maken met uw thuis- of kantoornetwerk met volle gigabit bandbreedte, met ondersteuning voor 10/100/1000 Mbps. Bovendien, met ondersteuning van functies zoals Jumbo Frames, VLAN tagging en Wake on LAN (WOL), biedt deze veelzijdige netwerkadapter een uitgebreide gigabit netwerkoplossing.

Naast de gigabit Ethernet-aansluiting voegt de adapter drie USB 3.0 hubpoorten toe aan uw systeem, waardoor u externe opslagmedia of andere USB-randapparaten lokaal op de hostcomputer kunt aansluiten. De hubpoorten ondersteunen een USB 3.0 snelheid van max. 5 Gbps en kunnen mobiele apparaten (zoals iPhone®, iPad® en de meeste Android™-apparaten) snel opladen.

Neerwaarts compatibel met USB 2.0 en USB 1.x standaards ondersteunt de gigabit adapter/USB 3.0 hub nog steeds oudere USB-apparaten en kan ook worden gebruikt met een ouder systeem zonder USB 3.0 poorten (netwerksnelheid beperkt door USB 1.x/2.0 bus), waardoor u een combinatie van USB 3.0/2.0/1.x-apparaten kunt gebruiken. Voor nog meer mobiliteit kunnen de adapters met of zonder de meegeleverde externe voedingsadapter worden gebruikt, waardoor u geen beschikbaar wandcontact meer hoeft te zoeken.

Gedekt door een StarTech.com 2-jarige garantie en gratis levenslange technische ondersteuning.

StarTech.com Voordeel

  • Maximaliseer uw capaciteit door één USB 3.0-sleuf te veranderen in een gigabit netwerkverbinding en 3-poorts USB 3.0 hub
  • Eenvoudigere aansluiting van meerdere USB-apparaten, met meer ruimte tussen USB-pooorten
  • Extra lange USB 3.0-kabel biedt meer comfort dankzij een langere USB-verbinding op grotere afstand van uw pc of laptop vs. typische USB-dongleadapters
  • Levert voldoende voeding voor krachtige USB-apparaten, met de optionele voedingsadapter (meegeleverd)
  • De compact en draagbare USB 3.0 hub kan via een USB-poort worden gevoed

Toepassingen

Sluit een breed scala aan randapparatuur aan op een laptop, thuis of op kantoor, met de mogelijkheid deze allemaal in een keer los te koppelen van een enkele USB-aansluiting

Vervang een defecte ingebouwde netwerkadapter door een externe USB Ethernet-aansluiting, zodat u niet de behuizing van een pc of laptop hoeft te openen

Laad snel meerdere mobiele apparaten op zoals iPhone®/iPad®/iPod®/Android-apparaten via één USB 3.0-poort

Technische specificaties

Garantie
Garantie 2 Years
Hardware
Bus type USB 3.0
Chipsetcode ASIX - AX88179
VIA/VLI - VL811
Industriestandaarden IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3az
USB 3.0 rev. 1.0
Interface RJ45 (gigabit Ethernet)
USB 3.0
Poorten 1
Prestaties
Auto MDIX Ja
Compatibele netwerken 10/100/1000 Mbps
Full duplex ondersteuning Ja
Jumbo Frame Support 4K max.
Maximale overdrachtsnelheid 5 Gbps (USB 3.0)
1 Gbps (gigabit Ethernet)
Type en snelheid USB 3.0 - 5 Gbit/s
Connector(en)
Type connector(en) 1 - RJ-45 Vrouwelijk
1 - USB 3.0 Micro-B (10-polig, SuperSpeed) Vrouwelijk
3 - USB Type-A (9-polig) USB 3.0 Vrouwelijk
Software
Besturingssystemen Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Mac OS® 10.6 to 10.13 - VLAN tagging is currently not supported in Mac OS
Linux Kernel 2.6.25 to 4.11.x LTS Versions only
Indicatoren
LED-indicatoren 1 - Blauw - Power
1 - Groen - netwerklink (brandt permanent) / activiteit (knippert)
Voeding
Inclusief voedingsadapter Inclusief wisselstroomadapter
Ingangsspanning 100 ~ 240 AC
Polariteit pin midden Positief
Stekkertype M
Uitgangsspanning 5 DC
Uitgangsstroom 2.0 A
Vermogensopname 10
Gebruiksomgeving
Bedrijfstemperatuur 0°C to 50°C (32°F to 122°F)
Opslagtemperatuur -20°C to 60°C (-4°F to 140°F)
Vochtigheid 5% - 85% rel. luchtvochtigheid
Fysieke eigenschappen
Breedte product 65 mm [2.6 in]
Form Factor Aparte kabel
Gewicht product 55 g [1.9 oz]
Hoogte product 20 mm [0.8 in]
Kleur Wit
Lengte product 92 mm [3.6 in]
Verpakkingsinformatie
Verpakkingsaantal 1
Verzendgewicht (verpakt) 344 g [12.1 oz]
Wat wordt er meegeleverd
Meegeleverd 1 - USB 3.0 GbE-adapter plus hub
1 - Micro USB 3.0-kabel
1 - Universele voedingsadapter
3 - Stekker voor voedingsadapter (NA/GB/EU)
1 - Driver-CD
1 - Handleiding

Compatibiliteit

Bekijk volledige OS compatibiliteit
Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Mac OS® 10.6 to 10.13 - VLAN tagging is currently not supported in Mac OS
Linux Kernel 2.6.25 to 4.11.x LTS Versions only

Certificaties

Verwante producten

USB 3.0 naar gigabit Ethernet NIC netwerkadapter - wit
USB31000SW
USB 3.0 naar gigabit Ethernet NIC netwerkadapter - wit

Voeg Gigabit Ethernet-netwerkconnectiviteit toe aan een laptop of pc via een USB 3.0-poort

32,99 € exc BTW
39,92 € inc BTW
USB 3.0 naar Gigabit Ethernet Netwerkadapter
USB31000S
USB 3.0 naar Gigabit Ethernet Netwerkadapter

Voeg Gigabit Ethernet-netwerkconnectiviteit toe aan een laptop of pc via een USB 3.0-poort

32,99 € exc BTW
39,92 € inc BTW
USB 3.0-naar-gigabit Ethernet NIC netwerkadapter – 10/100/1000 Mbps
USB31000NDS
USB 3.0-naar-gigabit Ethernet NIC netwerkadapter – 10/100/1000 Mbps

Voeg Gigabit Ethernet-netwerkconnectiviteit toe aan een laptop of pc via een USB 3.0-poort

31,99 € exc BTW
38,71 € inc BTW
6-poort USB 3.0/2.0 Combo Hub met Oplaadpoort
ST7320USBC
6-poort USB 3.0/2.0 Combo Hub met Oplaadpoort

Voeg 2x USB 3.0 en 4x USB 2.0 poorten toe aan een computer, extern via een enkele USB 3.0-aansluiting

53,99 € exc BTW
65,33 € inc BTW

Accessoires

Productondersteuning

Veelgestelde vragen (FAQ)

Installatie

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Right-click Setup.exe.
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. Your computer will automatically complete the driver installation and your device should be ready to use.

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Double-click Setup.exe.
  4. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  5. Your computer will automatically complete the driver installation and your device should be ready to use.

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.
  3. Right-click AX88179, which will have a “!” or “?” next to it to indicate a driver issue.
  4. Click Update Driver.
  5. Click Browse my computer for driver software.
  6. Select the Let me pick from a list of device drivers on my computer option.
  7. On the Select your device’s type from the list below screen, click Show All Devices, and click Next.

Note: The Select your device’s type from the list below screen does not appear on all systems. If you do not see this screen, skip this step.

  1. Select the Have Disk option.
  2. Browse to the AX88179\your_operating_system\Manual Drivers\ folder and open the 32-bit or the 64-bit folder, depending on your system type.

Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  1. Click the Ax88179_178a file. Click OK, and then click Next.

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.
  3. Right-click AX88179, which will have “!” or “?” next to it to indicate a driver issue.
  4. Click Update Driver.
  5. On the Hardware Update Wizard screen, click Install from a list or specific location (Advanced), and then click Next.
  6. Select the Don’t search, I will choose the driver to install option, and then click Next.
  7. On the Hardware Type screen, click Show All Devices, and then click Next.

Note: The Hardware Type screen does not appear on all systems. If you do not see this screen, skip this step.

  1. On the Select the Device Driver you want to install for this hardware screen, select the Have Disk option.
  2. In the Install from Disk dialog box, click Browse.
  3. Browse to the AX88179\your_operating_system\Manual Drivers\ folder and open the 32-bit or the 64-bit folder, depending on your system type.

Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  1. Click the Ax88179_178a file. Click OK, and then click Next.

Hoe gaat u te werk

StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met:

  1. The BIOS must support PXE.
  2. The BIOS must see the card.
  3. The environment must have drivers for the chipset used in the card.
  4. If using a USB networking card, the environment must have support for USB devices as well.

To confirm that the Mac OS detects your expansion card, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your expansion card is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Troubleshooting

When you troubleshoot issues with a network adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Ethernet cables
  • Network devices
  • Computer system

To test your setup components, try the following:

  • Use the Ethernet cables, network devices, and computer system in another setup to see if the problem is with the components or the setup.
  • Use different Ethernet cables, network devices, and a different computer system in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.
  • Use short cables when you are testing.

When you test the Ethernet cables, network devices, and computer system, it is recommended that you do the following:

If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings.  You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed.

Note: You must log in as the local administrator before you continue.

To open Device Manager:

  • Press Windows key + R.
  • Type devmgmt.msc.
  • Click OK.
  1. Open the Networking adapters section.
  2. Right-click the network adapter that you want to change and select Properties.
  3. Click the Advanced tab.
  4. Scroll down to Speed & Duplex. By default, it is set to Auto-Negotiate. Select any of the speeds that you see in the list.
  5. Click OK and restart your computer.

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

You should not upgrade your device's firmware if you do not have any issues with the functionality of your device. The only time you should consider an upgrade is if you are experiencing a problem with the device, and you have confirmed that the firmware addresses this problem.  You can confirm this is the case by reviewing the documentation included with the firmware or from consulting with our Technical Support team. Incorrectly upgrading firmware can result in diminished performance so it is best to contact StarTech.com if you would like to perform this operation.