Product ID: SV5CONS
This Remote User Station for Enterprise Series IP KVMs provides system administrator access to StarTech.com Enterprise series KVM solutions (i.e. SV1653DXI) located up to 1000 ft. (300m) away - allowing convenient control of two separate KVM solutions without the need of a complete work station.
|Warranty Information||Warranty||2 Years|
|Connector(s)||2 - Console Interface(s)||USB Type-A (4 pin) USB 2.0|
|1 - Console Interface(s)||VGA (15 pin, High Density D-Sub)|
|2 - Host Connectors||RJ-45|
|PC Video Type||VGA|
|Number of Monitors Supported||1|
|Indicators||1 - LED Indicators||Green – Port Indicator|
|Packaging Information||Package Length||12.6 in [32 cm]|
|Package Width||2.5 in [63 mm]|
|Package Height||5.2 in [13.2 cm]|
|Shipping (Package) Weight||23.3 oz [660 g]|
|Max Transfer Distance||300 m (984 ft)|
|Maximum Analog Resolutions||1280 x 1024 @75Hz|
|Product Length||4.0 in [10.2 cm]|
|Product Width||4.4 in [11.2 cm]|
|Product Height||0.9 in [24 mm]|
|Weight of Product||6.7 oz [190 g]|
|Power||Power Source||AC Adapter Included|
|Input Voltage||115V AC|
|Output Voltage||5 DC|
|Center Tip Polarity||Positive|
|What's in the Box||1 - Included in Package||Remote User Station|
There are some quick tests that you can complete to rule out potential issues. You can test to make sure that the following components are working correctly and are not the source of the issue:
Note: When you test setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI extender, you should use an HDMI source when you test the components.
To test your setup components, try the following:
When you test your cables, it is recommended that you do the following:
When you test the video source and video destination, it is recommended that you do the following:
Note: In order for your setup to work properly, the video source, extender, and destination all need to support the resolution that you are using.
This device outputs a VGA signal. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.
|Target connection||First conversion||Second conversion (if required)|
|DVI-D||VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.||HDMI to DVI-D: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.|
|DVI-I||VGA to DVI-I: https://www.startech.com/Cables/Audio-Video/Video-Adapter/DVIVGA/.||N/A|
|DisplayPort||VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.||HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.|
Note: You might need to use more than one converter as part of your solution; however, you should try to use the least number of converters and cables to connect your source and destination. If you have the option to convert to multiple target video connections, choose the option that requires the fewest number of conversions.
When you convert from VGA to DVI, you need to know if you are converting to a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you need, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.
You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.
Note: Certain devices may have a DVI-I connection but only support DVI-D signaling. It is important to verify that your DVI-I device supports DVI-I signaling.