Product ID: PYO2L
The PYO2L LP4 to 2x LP4 Power Y Splitter Cable features one LP4 male connector that breaks out into two LP4 female connectors, providing a cost-effective solution for connecting two LP4 peripheral devices (CD/DVD-ROM drives, IDE hard drives etc.) to a single LP4 connector provided by the computer power supply.
|Connector(s)||1 - Connector A||LP4 (4 pin; Large Drive Power)|
|2 - Connector B||LP4 (4 pin; Large Drive Power)|
|Packaging Information||Package Height||9,0 mm [0,4 in]|
|Package Length||22,5 cm [8,9 in]|
|Shipping (Package) Weight||28,0 g [1,0 oz]|
|Package Width||12,5 cm [4,9 in]|
|Physical Characteristics||Weight of Product||23,0 g [0,8 oz]|
|Product Width||2,5 cm [1,0 in]|
|Product Height||1,4 cm [0,6 in]|
|Cable Length||230 mm [9,1 in]|
|Product Length||24,5 cm [9,6 in]|
|What's in the Box||1 - Included in Package||LP4 to 2x LP4 Power Y Splitter Cable M/F|
When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.