Product ID: SATAPOWEXT12
The SATAPOWEXT12 SATA Power Extension Cable (15-pin, 12-inch) enables you to extend the reach between internal SATA power and drive connections by up to 12 inches.
The extension cable helps to simplify drive installation by overcoming typical connection limitations and reduces the risk of damage to the drive or motherboard SATA connectors by eliminating the need to strain or stretch the cable in order to make the necessary connection.
This SATA Power Extension Cord is backed by StarTech.com’s lifetime warranty.
Warranty Information | Warranty | Lifetime |
---|---|---|
Connector(s) | 1 - Connector A | SATA Power (15 pin) |
1 - Connector B | SATA Power (15 pin) | |
Packaging Information | Package Height | 8 mm [0.3 in] |
Package Length | 22.5 cm [8.9 in] | |
Shipping (Package) Weight | 28 g [1.0 oz] | |
Package Width | 12.5 cm [4.9 in] | |
Package Quantity | 1 | |
Physical Characteristics | Weight of Product | 23 g [0.8 oz] |
Wire Gauge | 18 AWG | |
Cable Length | 30.5 cm [12.0 in] | |
Product Length | 30.5 cm [12.0 in] | |
Product Width | 25 mm [1.0 in] | |
Product Height | 10 mm [0.4 in] | |
What's in the Box | 1 - Included in Package | 12in 15 pin SATA Power Extension Cable |
We are always ready to assist you with any questions you may have.
Live Chat (opens in new window)We are always ready to assist you with any questions you may have.
Live Chat (opens in new window)When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Power supply
Computer part
Power cable
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.
Check out our review guidelines.