Product ID: QSFP40GER4ES
100% Dell EMC Compatible. Guaranteed.
The QSFP40GER4ES is a Dell EMC QSFP-40G-ER4 compatible fiber transceiver module that has been designed, programmed and tested to work with Dell EMC brand compatible switches and routers. It delivers dependable 40 GbE connectivity over fiber cable, for 40GBase-ER4Q compliant networks, with a maximum distance of up to 40 km (24.8 mi).
• Wavelength: 1311nm
• Maximum Data Transfer Rate: 40 Gbps
• Type: Single Mode
• Connection Type: LC
• Maximum Transfer Distance: 40 km (24.8 mi)
• MTBF: 8,596,956 hours
• Power Consumption: < 1.6W
• Digital Diagnostics Monitoring (DDM): Yes
This QSFP+ module is hot-swappable making upgrades and replacements seamless by minimizing network disruptions.
All StarTech.com SFP & SFP+ transceiver modules are backed by a StarTech.com Lifetime Warranty and Free Lifetime Multilinugal Technical Support. StarTech.com offers a wide variety of SFP modules and direct-attach SFP Cables, providing the dependability and reliability you need to ensure consistent network performance.
|Connector(s)||1 - Connector A||SFP Slot|
|1 - Connector B||Fiber Optic LC Duplex|
|Environmental||Operating Temperature||0°C - 70°C|
|Storage Temperature||-40°C - 85°C|
|Humidity||0 - 85%|
|Hardware||Compatible Brand||Dell EMC|
|Industry Standards||IEEE 802.3ba 40GBASE-ER4Q|
|Packaging Information||Package Height||35 cm [13,8 in]|
|Package Length||20,5 cm [8,1 in]|
|Shipping (Package) Weight||60 g [2,1 oz]|
|Package Width||12 cm [4,7 in]|
|Performance||Power Consumption (In Watts)||< 3.5W|
|Compatible Networks||40 Gbps|
|Maximum Data Transfer Rate||40.00 Gbps|
|Max Transfer Distance||40 km (24.8 mi)|
|Wavelength||1270nm to 1330nm|
|Fiber Operating Mode||Full-Duplex|
|Physical Characteristics||Product Height||12,6 mm [0,5 in]|
|Product Length||13,9 mm [0,5 in]|
|Weight of Product||40 g [1,4 oz]|
|Product Width||58,4 mm [2,3 in]|
|What's in the Box||1 - Included in Package||QSFP+ Transceiver|
UPC and APC are fiber connector types. UPC (Ultra Physical Contact) connectors have a fiber connector end face that has been polished to a dome-shape. APC (Angled Physical Contact) connectors have a fiber connector end face that has been polished at an eight degree angle. When building fiber solutions, be sure to avoid mixing UPC and APC connectors. UPC and APC cannot mate with one another because causes the fiber cores don’t touch. This can cause a degraded connection or none at all.
StarTech.com fiber products use UPC connectors.