VGA-Over-IP Extender - 1920 x 1200

Broadcast your computer screen to a remote display over your network, with remote USB console control

Product ID: IPUSB2VGA2

2,8 stars (5 reviews) |
  • Collaborate with co-workers by using your network to easily switch between devices shown on a shared display
  • Share video with a wireless or wired LAN connection using any Windows computer on your network
  • Control the video-over-IP adapter, using the included software
Your price
€420,99 EUR excl. VAT
€526,24 EUR incl. VAT

This VGA over IP extender lets you share a VGA display or projector with the wireless or wired computers on your network. The IP extender makes it easier than ever for users to collaborate and deliver presentations in boardrooms and office meetings, with intuitive controls and effortless screen sharing.

The IP video extender supports resolutions up to 1920x1200 and features two built-in USB ports and 3.5 mm audio set, enabling you to connect remote USB devices and speakers with a microphone to your computer from your display. It’s the perfect solution for controlling a computer from wherever the adapter is located.

Streamline your digital collaboration

The IP video extender helps you boost your office productivity, by making it easier for users to collaborate and communicate. The included software lets you connect multiple computers and easily switch between which user is sharing their content with the VGA display, unlike some wireless video systems that are difficult to configure and require users to disconnect and reconnect manually. 

You can even use the video-over-IP extender to share information with a remote audience, such as connecting to a remote display over an office LAN, to hold remote meetings while you're in another part of the office.

Bring your own device

With this IP video extender, you can turn your VGA television, monitor or projector into an IP display that can connect to any Windows® computer on your network. It's perfect for conference rooms and classrooms where different ideas are shared by users who bring their own computers.

Extend two USB devices at your display

With a built-in USB hub, you can use your computer to access two remote USB devices at your remote display, enabling you or your customers to control the computer from the remote location. Remote operation can be used to create interactive digital signage, to engage your customers. Or, if you're using the video-over-IP extender as part of your IT infrastructure, you can use the USB extender to add a remote KVM console that you can use to control your server from a remote location.

The IPUSB2VGA2 is TAA compliant and backed by a 2-year warranty with free lifetime technical support.


  • Create a remote KVM console that you can use to control your server from a remote location
  • Install in your office boardroom, to enable your employees or co-workers to share each other's screens on a larger display
  • Share information with clients at doctors offices and hospitals, while keeping the computer in a remote, secure location

Partner Numbers

  • Ingram DK V933807
  • UPC 065030864541


  • Windows 7 logo
  • Windows 8 logo
Windows® 8, 7, Vista, XP


Warranty Information Warranty 2 Years
1 - Local Unit Connectors VGA (15 pin, High Density D-Sub)
USB Mini-B (5 pin)
2 - Local Unit Connectors 3.5 mm Mini-Jack (3 Position)
USB Type-A (4 pin) USB 2.0
Connector(s) 1 - Connector A VGA (15 pin, High Density D-Sub)
2 - Connector A USB Type-A (4 pin) USB 2.0
3.5 mm Mini-Jack (3 Position)
1 - Connector B USB B (4 pin)
Environmental Operating Temperature 0°C - 40°C (32°F ~ 104°F)
Storage Temperature -10°C - 60°C (14°F - 140°F)
Humidity 0-80% RH
Hardware Ports 1
Cabling Cat 5 UTP or better
Audio Yes
Chipset ID DisplayLink - DL-195
Daisy-Chain No
Packaging Information Package Height 6.8 cm [2.7 in]
Package Length 16.7 cm [6.6 in]
Shipping (Package) Weight 0.7 kg [1.5 lb]
Package Width 14.2 cm [5.6 in]
Performance Maximum Data Transfer Rate USB - 480Mbps
Ethernet - 1000Mbps
Max Distance 100 m / 330 ft
Maximum Analog Resolutions 1920x1200
Supported Resolutions Widescreen (16/32 bit):
1920x1200, 1920x1080, 1680x1050, 1600x900, 1440x900, 1360x768, 1280x800, 1280x768, 1280x720

Standard(16/32 bit):
1600x1200, 1400x1050, 1280x1024, 1280x960, 1152x864, 1024x768, 800x600
Wide Screen Supported Yes
Audio Specifications Two channel stereo audio supported
General Specifications This USB video adapter uses a DisplayLink family chipset. If you’re connecting this device to a computer along with additional USB video adapters or docking stations, please avoid using devices with a Trigger or Fresco family chipset.
Physical Characteristics Material Steel
Product Length 10.1 cm [4.0 in]
Product Width 7.3 cm [2.9 in]
Product Height 2.3 cm [0.9 in]
Weight of Product 304.0 g [10.7 oz]
Power Power Source AC Adapter Included
Input Voltage 100 - 240 AC
Input Current 0.6 A
Output Voltage 5 DC
Output Current 2 A
Center Tip Polarity Positive
Plug Type N
Power Consumption (In Watts) 10
Software OS Compatibility Windows® 8, 7, Vista, XP
What's in the Box 1 - Included in Package VGA over IP extender
3 ft [1 m] USB cable
5 ft [1.5 m] CAT5 cable
universal power adapter (NA, EU, UK, ANZ)
mounting bracket
screw kit
footpad set
quick install guide



6 ft Slim 3.5mm Stereo Audio Cable - M/M

Connect an iPhone® or other MP3 player to a car stereo

Your price
€3,99 EUR excl. VAT
€4,99 EUR incl. VAT

10 ft Slim 3.5mm Stereo Audio Cable - M/M

10 ft slim profile Stereo 3.5mm audio cable

Your price
€4,99 EUR excl. VAT
€6,24 EUR incl. VAT

15 ft Slim 3.5mm Stereo Audio Cable - M/M

Easily connect an iPod or other MP3 player to your stereo

Your price
€5,99 EUR excl. VAT
€7,49 EUR incl. VAT

3 ft Stereo Audio Cable - 3.5mm Male to 2x RCA Male

Connect your Computer or Audio Player to an RCA Audio Device

Your price
€6,99 EUR excl. VAT
€8,74 EUR incl. VAT

6 ft Stereo Audio Cable - 3.5mm Male to 2x RCA Male

Connect your computer or audio player to an RCA audio device

Your price
€4,99 EUR excl. VAT
€6,24 EUR incl. VAT


Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)




Product Support

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Frequently Asked Questions


Computers running macOS Catalina (10.15) may experience compatibility issues with products that use DisplayLink technology, such as USB Docking Stations and Video Adapters. Connecting to a DisplayLink-powered Product may cause the Display(s) to output a blank screen. If you experience this problem, follow these steps:

  1. Update computer to the latest version of macOS 10.15
  2. Permit Screen Recording by following these steps: macOS Catalina 10.15: Screen Recording permission (external link)
  3. Enable the DisplayLink Kernel Extension by following these steps: macOS 10.13, 10.14 and 10.15: Video functionality not enabled (external link)
  4. If the problem persists, try installing the DisplayLink Manager Application (external link). Be sure to run the application after installation and select “Launch automatically after logging-in” for it to start automatically every time you log-in.
  1. The power adapter may not be connected at the correct unit or may not be connected at all.  Please check your product manual to see where your power adapter has to be positioned.
  2. An adapter to another video signal may be connected to the Transmitter or Receiver unit.  Please avoid any converters for the initial setup.
  3. The Cat 5 or 6 cable coming from the transmitter or receiver unit may be connected to a network switch.  Some of our video extenders will work in this configuration, but others will not. Please check your product manual to see if your model can be used connected to an IP network. For the initial setup, avoid connecting the Cat 5 or 6 cables to any network switch, hub, or router.
  4. The category of Unshielded Twisted Pair (UTP) cables may not meet’s requirements. Ensure at least Cat 5, 5e, or six cables are used, and they have eight wires. Some Cat 5 cables only have four wires. If using Cat 6 cables, be aware they have more twists per foot, so you may have to use shorter cable lengths if using Cat 6 cabling between your video extenders.
  5. Bundling up the UTP cabling connected to the extenders can cause crosstalk, which will prevent the video signal from showing on the display.  Unwrapping the cable should resolve this issue.
  1. Please check to see if your model has an adjustable Gain dial on the remote unit.
  2. If it does, use it to adjust the color until it is acceptable.
  3. Replace the VGA cable with a higher quality cable like’s MXT101MMHQ.

The problem is usually a bad quality or damaged VGA cable on either end of the extender set. Try replacing the VGA cable with a higher quality cable like’s MXT101MMHQ.

When you troubleshoot issues with a video extender, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video and Ethernet cables

  • Video extender

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI extender, you should use an HDMI source when you test the components.

To test your setup components, try the following:

  • Use the cable, video extender, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video extender, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video extender from your setup and test to make sure that the video source and video destination work together without the video extender.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, extender, and destination all need to support the resolution that you are using.

If the IP extender detects that it does not have the necessary bandwidth to function, it may disconnect from the network.  It is recommended that you use the IP extender with a switch or router with no other networking devices connected to it.

If the IP extender outputs video at 1920x1080, it can use up to 136Mbps. If the IP extender outputs video at 1920x1080 and remote USB devices are connected it, the IP extender can use up to 275Mbps.

Make sure that your network can support the bandwidth required by the IP extender.

Before You Buy

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
*Product appearance and specifications are subject to change without notice.

Customer Reviews

(5 reviews)
2,8 out of 5 stars
  • 5 (1)
  • 4 (1)
  • 3 (1)
  • 2 (0)
  • 1 (2)
Tell us what you think of this product.
Need a little help getting started?

Check out our review guidelines.

1 - 5 of 5 Reviews
(1 Stars)

Haven't got 1 to work yet

By: WadeK - 04/13/2017
The first unit never even showed on the software. Tech support sent another unit, it showed on the software until trying to config, then never came to life again.
| Helpful?
(3 Stars)

This is a remote display, not KVM over IP

By: bofh - 07/30/2017
Think of this as USB to VGA adapter, with option to work over IP. It adds a second monitor to a computer that has the driver installed. It is not a KVM that works over the network.
| Helpful?
Brian, Customer Support on 02/08/2017 15.54.57
Thanks for sharing your review of our IPUSB2VGA2. We're sorry for any confusion regarding this unit's functionality. You're right this unit is not a KVM over IP product. Please consider our IP KVM solutions found here: Thank you.
(1 Stars)

Poor hardware, not stable!

By: HICHEM - 07/21/2018
I bought it 3 weeks ago to connect a remote CCTV VGA Display, it's not stable, not sure if it hardware of the USBserver software but it's not stable I'm througing +600$ away since i BOUGHT TWO !
| Helpful?
Sam, Customer Support on 24/07/2018 10.25.22
Thank you for your feedback. We're sorry for the problems you've had IPUSB2VGA2 and would like to help. We recommend reaching out to our Technical Advisors so we can get more detail about the issue you're experiencing and to help with troubleshooting. We're available 24 hours a day, 5 days a week, at 1-800-265-1884 or
(4 Stars)

Works well, be sure to update the firmware!

By: Techie92 - 10/19/2018
I mostly have the older v1 version of this product, but the USB Server portion is the same on both products. Be aware that these ship with an obsolete and unstable firmware version and PC application included. My recommendation is to update the firmware as soon as you get it, and don't use the software that StarTech supplies. Both are *ancient*. The firmware for these can be found if you search for "Elite Silicon Technology Taiwan" (the chipmaker that produces the USB Server components). You need Firmware v068 to fix the stability issues. I used to have to power cycle these boxes all the time, now I haven't had to touch one in over a year. Be sure to download the newer version of the USB Server application too. Grab the DisplayLink driver from Displaylink's website. Once you update the units, these work great. The software is a bit clunky if you have a lot of them since you can't sort by device name, but otherwise it seems to work well. I can show movies on the remote display without issue, and we also run interactive whiteboards and presentations on connected displays and projectors.
| Helpful?
(5 Stars)

Rock solid for almost 2 years

By: Cookie - 09/09/2019
Got this almost 2 years ago to share a display and it's been going 24/7/365 since. Streamcast software is easy to use and worked fine when we were broadcasting to web as well
| Helpful?
Back to top