Product ID: ST12MHDLAN
The HDMI® over IP kit lets you extend an HDMI signal over your network. You can use additional receivers (sold separately) to distribute the HDMI signal to multiple locations and combine your remote displays to create a video wall.
In a point-to-multipoint setup, the HDMI over IP kit can be connected through an unmanaged or managed Gigabit LAN portal. You can connect one or multiple sources (transmitters) to multiple displays (receivers) over IP, using a managed Gigabit Ethernet switch (with IGMP). For additional scalability, you can combine up to 16 different kits.
For smaller-scale applications, the extender kit can be used as a point-to-point video extender. You can connect the transmitter and receiver units directly over Cat5 or Cat6 cabling for a small-scale, one-to-one HDMI extension up to 330 feet (100 meters).
The HDMI distribution kit features easy-to-use video control software that helps you manage your IP video distribution. The app is simple to set up with automatic hardware detection, and lets you switch video sources for each remote display. You can also intuitively create and manage a video wall for an impressive digital signage presentation to catch the attention of your audience.
The software is available on iOS for your iPhone or iPad, Android for your smartphone or tablet, and Google Chrome browser.
The HDMI over IP extender kit includes optional mounting hardware for a tidy installation. Ideal for high-definition applications, the extender supports 1080p video resolutions and digital stereo audio. Plus, because the extender uses standard non-proprietary Cat5e or Cat6 Ethernet cable with RJ45 connectors, it eliminates both the expense and hassle of running specialized cables.The extender also features an EDID copy function, which ensures native resolution and maximum compatibility with your display or projector for a convenient plug-and-play installation.
Download the StarTech.com Video Control software to manage your IP video distribution.
NOTE: Your router must support IGMP snooping. Please refer to your network switch or router documentation to ensure IGMP snooping is supported and enabled.
The ST12MHDLAN is TAA compliant and backed by a StarTech.com 2-year warranty with free lifetime technical support.
|Warranty Information||Warranty||2 Years|
|Connector(s)||1 - Connector Type(s)||RJ-45|
|HDMI (19 pin)|
|1 - Local Unit Connectors||HDMI (19 pin)|
|1 - Remote Unit Connectors||RJ-45|
|HDMI (19 pin)|
|Environmental||Operating Temperature||0°C to 40°C (32°F to 104°F)|
|Storage Temperature||-10°C to 60°C (14°F to 140°F)|
|Humidity||0% - 80 %|
|Cabling||Cat 5e UTP or better|
|Indicators||1 - LED Indicators||Link OK / POWER - Transmitter|
|Reset - Transmitter|
|Link OK / POWER - Receiver|
|Reset - Receiver|
|Packaging Information||Package Height||86 mm [3.4 in]|
|Package Length||24.6 cm [9.7 in]|
|Shipping (Package) Weight||2.0 kg [4.5 lb]|
|Package Width||29.5 cm [11.6 in]|
|Performance||Max Distance||100 m / 330 ft|
|Maximum Digital Resolutions||1920x1200 @60Hz|
|Supported Resolutions||1920 x 1200 (1080p)|
|Wide Screen Supported||Yes|
|Audio Specifications||Stereo Sound|
|Physical Characteristics||Weight of Product||939 g [33.1 oz]|
|Product Length||13 cm [5.1 in]|
|Product Width||97 mm [3.8 in]|
|Product Height||2.8 cm [1.1 in]|
|Power||Power Source||AC Adapter Included|
|Input Voltage||100 - 240 AC|
|Input Current||0.6 A|
|Output Voltage||12V DC|
|Output Current||1.5 A|
|Center Tip Polarity||Positive|
|Power Consumption (In Watts)||10|
|What's in the Box||1 - Included in Package||HDMI over IP transmitter|
|HDMI over IP receiver|
|2 - Included in Package||mounting brackets|
|universal power adapter (NA / EU / UK / AU)|
|foot pad set|
Use with ST12MHDLAN to extend HDMI Over IP to additional displays
In stock: 49
Replace your lost or failed power adapter
In stock: 141
Replace your lost or failed power adapter
In stock: 44
Connect an HDMI®-enabled output device to a DVI-D display, or a DVI-D output device to an HDMI-capable display
In stock: 1828
Scale your network and connect up to 10 different Gigabit Ethernet devices, including 8x RJ45 + 2x fiber optic connections using the SFPs of your choice
In stock: 10
TV Video Wall System | Steel | Anti-Theft | For 45" to 70" Displays
In stock: 3
To create a video wall with ST12MHDLAN, do the following:
Note: The video wall cannot be created with switches that are not managed. For more information about why a managed switch is required, visit http://www.startech.com/faq/video_extenders_st12mhdlan_video_wall_network_requirements. A layer two managed Gigabit Ethernet switch () is recommended for use in video wall setups.
The following example describes how to create a 2 x 2 video wall that uses two video inputs. The information contained in the example can be applied to setups with multiple switches, receivers, and transmitters.
The following is a list of the hardware components used in the example setup:
Configure the hardware
When all of the units are powered on and the HDMI sources are transmitting video, there should be mirrored images from source A displayed on the monitors.
Configure the switch
Note: The following instructions are based on the default configuration for the IES101002SFP switch.
To access the configuration settings for the switch, complete the following:
To configure the IGMP on the switch, complete the following:
Connect your Android device to the network
To connect to the network for the ST12MHDLAN, you need to connect your mobile device to the 169.254.XXX.XXX network. Depending on the version of the Android operating system that you are running, you many need to manually create a wireless network with a static IP address or assign an IP address for an existing wireless connection.
To connect to the ST12MHDLAN network on a device running Android 5.1.1 (Lollipop) or Cyanogen 12.0, do the following:
Connect your iOS device to the network
Configure the video wall
You should now be able to detect two transmitters and four receivers in the Android application. The inputs can be routed and divided between the receivers and the positioning can be changed to achieve the necessary video wall configuration.
You can disconnect the mobile device from the setup and the setup will retain the configuration as long as the video inputs remain turned on.
To get the highest quality signal from your source to your display when you use an HDMI extender, do the following:
Make sure that the HDMI versions of the source, extender, and destination are compatible. For example, if you require 3D support, make sure that all of the devices can support 3D over HDMI.
Use the least amount of adapters, splitters, or converters as possible. Each device that you use in your setup creates additional points of potential failure and creates more steps for an HDCP key to hop through, which may cause issues with older displays. For more information on HDCP, refer to the following FAQ: http://www.startech.com/faq/video_signal_converters_HDCP.
Use an HDMI extender that exceeds the requirements of the setup. For example, if you need to extend the signal 200 feet, it is best to use an extender capable of more than 200 feet.
Make sure that all of the CAT 5/6 runs are as straight as possible, with the least amount of coiling.
Make sure that all of the patches, wall jacks, and cables use the highest possible CAT specification, (for example, CAT 6), and were tested to conform to the standard.
Use patches, wall jacks, and cables with the same pin configuration. For more information on T568A versus T568B wiring, refer to the following FAQ: http://www.startech.com/faq/network_cables_a_vs_b_pinout.
Keep the cabling away from sources of high noise.
Make sure that you use adequate electrical grounding in your setup.
When you troubleshoot issues with a video extender, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Video and Ethernet cables
Video source (such as a DVD player or computer)
Video destination (such as a monitor or projector)
Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI extender, you should use an HDMI source when you test the components.
To test your setup components, try the following:
Use the cable, video extender, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different cable, video extender, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
Remove the video extender from your setup and test to make sure that the video source and video destination work together without the video extender.
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, extender, and destination all need to support the resolution that you are using.
The ST12MHDLAN app is available for iOS, Android, and Google Chrome. To download and install the app navigate to the StarTech.com website. You will find a download link for each platform on the ST12MHDLAN product page under the Overview tab. The device on which you install the application will be referred to as the control device.
The control device must be on the same network as your ST12MHDLAN transmitters and receivers. The transmitters and receivers have a default IP address in the range of 169.254.x.x with a subnet mask of 255.255.0.0. If you need to change the IP address to fit your network infrastructure, make sure you keep all devices on the same network. For example, you can change your transmitter to 192.168.1.100 and your receiver to 192.168.1.101. There are links in the description to assist you in changing your control device's IP address.
The app will automatically discover any transmitters and receivers that are on the same network as the control device. These devices will be shown in the Devices tab.
You can manually force the control device to search for any transmitters and receivers by pressing the Refresh button in the Devices tab.
You can access the Menu from any tab within the app.
The menu includes a helpful guide to the app as well as the ability to search a specific IP address for a transmitter or receiver. The Menu also allows you to turn on Demo Mode which populates the app with virtual devices, allowing you to test configurations as if actual devices were connected.
The Menu also includes Device Administration which you can use to reboot all of your connected devices or reset the connected devices to factory defaults.
On the Devices tab you can adjust the individual settings for each transmitter and receiver. Simply tap on a device’s name to load that device’s settings. On the Settings page you can change the name of the device, the IP address and subnet, view error history, and other advanced settings.
The second tab of the ST12MHDLAN app is the Switches tab. This tab allows you to define which video source is being sent to each video receiver. You can change the video source quickly and easily by selecting a different source in this tab.
The final tab in the ST12MHDLAN app is titled Walls and allows you to customize your video walls and digital signage.
To create a new video wall, complete the following:
a)Tap Bezel Compensation.
b)Measure your display with and without the bezel, and enter the measurements as indicated in the diagram above.
As you add more video walls to the Walls tab you can easily modify or delete them by tapping on each entry.
You can manage your video wall in one of two ways:
If at this point you have questions about the ST12MHDLAN review the other videos in this series. If you would like to learn more about video extenders in general review our video series on that subject.
To calculate the amount of bandwidth that this devices uses in Mbps at the maximum resolution of 1920x1080 @60Hz, add the number of transmitters to the number of receivers, and multiply the result by 45.
Note: Depending on the type of smartphone you are using and the version of the Android OS you are running, the text you see in step 4 might differ from Manage network settings.
To change your IP address so that you can access a specific device, complete steps 1 to 6, then tap DHCP to access the Internet again.
Note: If you are changing your IP address to access a specific device, repeat steps 1 to 3, and then click the DHCP tab to access the Internet again.
You should only use video converters and extenders if it is absolutely necessary to do so. In many cases, most video converters and extenders are not necessary if you purchase the correct cable.
The following table lists the maximum length of cable for common video standards.
|Video standard||Maximum length|
|DisplayPort||50 ft. (15.2m)|
|HDMI||50 ft. (15.2m)|
|DVI||50 ft. (15.2m)|
|VGA||200 ft. (71m)|
Note: StarTech.com offers cables longer than what is listed above, including active cables, which typically include built-in active signal boosters that allow for longer cables. Active cables are specifically designed to exceed the suggested maximum lengths and are tested at the listed specifications (for example, the maximum listed resolution).
Video adapters passively adapt a cable from one connector type to another. Video adapters do not change the signal type, or change the video standard.
Examples of common applications for adapters include the following:
DVI-I to VGA
RCA to BNC
Mini DisplayPort to DisplayPort
Couplers (female to female, or male to male)
Note: You can use a coupler to extend a cable for a short distance. However, each coupler that you use can introduce signal loss, which degrades the signal quality.
Video converters actively process and change the signal type from one video standard and convert it to another standard. They are typically used to convert digital to analog and vice versa, but can be used to convert a digital signal to another digital video standard (for example, HDMI to DisplayPort).
Video converters work over short distances from the source to the destination: up to 15 feet or 3 meters.
Video extenders convert an input signal to a higher voltage for transmission over longer distances and then convert the input signal back to the original video standard. The input and the output signal will match on a video extender, as the same video standard is maintained end-to-end. If a cable is extended with adapters or converters, the signal quality degrades.
Note: For more information on using a video adapter or converter with a video extender, see the following FAQ: http://www.startech.com/faq/video_signal_converters_convert_then_extend.
If you need to use a video extender with a video adapter or converter, you should position the adapter or converter as close to the video source as possible. For example, if you need to take a VGA signal from a computer and send it 200 feet to an HDMI® projector, you should convert the signal from VGA to HDMI and use an HDMI extender.
Note: For more information on when to use cables or extenders, see the following FAQ: http://www.startech.com/faq/video_signal_converters_when_to_convert.
StarTech.com offers HDMI over IP video extenders that let you extend HDMI signals over your network to create a video wall. They allow you to catch the attention of your audience with impressive digital signage. And with some of our video extenders, you can also extend USB.
This video extender works with a free mobile application that makes it easy to create and manage a video wall. The app is simple to set up with automatic hardware detection. It allows you to switch video sources for each remote display and manage your video distribution. The software is available on iOS, Android, and Google Chrome.
Video over IP devices extend video and audio differently than point-to-point video extenders. Point-to-point video extenders transmit your video and audio wirelessly or using cables separate from your network. Video over IP devices convert your video and audio to IP packets so that the data can be transferred over your existing network. This allows you to take advantage of your network infrastructure, and allows for greater control and scalability.
The maximum distance you can transmit is determined by your network infrastructure. Transmitters and receivers can be up to 100m apart from a network switch or router. The ST12MHDLAN allows for a maximum of 16 transmitters, depending on your network’s bandwidth. The maximum number of receivers depends on your network’s bandwidth.
Video signals sent through the video extender consume bandwidth on your network. To calculate the average bandwidth for a 1080p 60Hz video, use the following equation. Add the number of transmitters to the number of receivers, then multiply the result by 45 Mbps. For example, when you use one transmitter and four receivers, the average bandwidth is 225Mbps. For best performance, make sure that your hardware supports more bandwidth than is required. StarTech.com recommends at least a Gigabit network for use with the ST12MHDLAN.
The ST12MHDLAN requires that the transmitters and receivers are connected to a switch or router that supports Internet Group Management Protocol or IGMP. IGMP allows devices on the same network to communicate more efficiently. IGMP support can be confirmed with your hardware manufacturer.
If at this point you have questions about the ST12MHDLAN review the other videos in this series which will include installation, use of the software, and general troubleshooting. If you would like to learn more about video extenders in general review our video series on that subject.
By default, the video extender mirrors to multiple receivers, but can be configured into a video wall with multiple transmitters and many receivers. Multiple transmitters require a managed network switch with IGMP (Internet Group Management Protocol). When you use a single transmitter with many receivers, you should use IGMP to prevent other network devices from being flooded with multicast frames.
Managed switches have an interface that can be used for advanced configuration. Managed switches are typically configured in a web interface using a static IP address on the switch. A switch that is not managed has no configuration options, is purely plug-and-play, and is usually less expensive than managed switches.
When you use IGMP with the video extender, IGMP makes sure that multicast frames are only being sent from the video extender transmitters to the receivers. A managed switch usually has IGMP and will learn how to configure the network with the video extender. When a managed switch is learning the network configuration, it communicates with other IGMP devices and negotiates the best routes for traffic to flow, and then automatically assigns IGMP group memberships. The learning process is automatic and may take up to a minute to complete, depending on the complexity of the setup.
Point-to-point is the most basic setup with the video extender. To connect point-to-point, use an Ethernet cable to connect a transmitter directly to a receiver and make sure that the units have the same thumbwheel setting. The thumbwheels on the video extender make sure that the units are on the same default network and facilitates communication between the units during setup.
You can use a switch that is not managed with a number of receivers, but you will only be able to mirror the HDMI input to the receivers. If you use a switch that is not managed, you will not be able to further configure the units, as the rest of the network infrastructure will be flooded and cause network timeouts when you use the mobile application.
Yes, this video extender works with set-top boxes, provided the set-top box meets the following requirements:
You can use up to 16 transmitters with this device. There is no restriction on the number of receivers that you can use, but you should consider the amount of bandwidth that the device is using on the network, as this can impact the performance of other devices on your network.
Internet Group Management Protocol (IGMP) is a communications protocol used by hosts and routers. With IGMP, specific network devices are identified to receive network traffic, as opposed to network traffic being sent to every device connected to the network.
IGMP is required for this product because the total amount of network traffic across the network needs to be reduced to avoid impacting the other connected devices. Without IGMP, the video extender would send the video signal to each of the devices on your network.
No, you cannot use the ST12MHDLAN and ST12MHDLANU transmitters and receivers interchangeably. The transmitters and receivers are not compatible with each other.
Due to a wide variety of network factors, video latency cannot be accurately predicted.
This device outputs HDMI video signals. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.
When you consider whether to convert an HDMI video signal to another connection type, it is important to know if the media that is being converted from the HDMI video connection is protected by High-bandwidth Digital Content Protection (HDCP). If the media is protected by HDCP, you cannot convert to analog video connections because they do not support HDCP. You may experience this issue when you use devices like Blu-ray players, DVD players, and certain gaming consoles.
|VGA||HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA.|
|DisplayPort||HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.|
This device has an HDMI input port. If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.
DVI to HDMI video converters: https://www.startech.com/Cables/Audio-Video/Video-Adapter/HDMI-Cable-Adapters/.
DVI to HDMI video cables: https://www.startech.com/Cables/Audio-Video/HDMI/HDMI-to-DVI/.
DisplayPort to HDMI passive converters: https://www.startech.com/AV/Displayport-Converters/DP-HDMI/?filter_CONVERTTYPE=Passive.
DisplayPort to HDMI active converters: https://www.startech.com/AV/Displayport-Converters/DP-HDMI/?filter_CONVERTTYPE=Active.
The converter that you require depends on the type of DisplayPort video source that you are using. For more information about converting DisplayPort video signals, refer to the following FAQ: https://www.startech.com/faq/DisplayPort_Converter_DP_Multi_Mode.
Check out our review guidelines.