10/100 VDSL2 Ethernet Extender Kit over Single Pair Wire – 1km

Permite extender su red de 10/100 Mbps hasta un km mediante Ethernet o líneas telefónicas RJ11

ID del Producto: 110VDSLEXTGB

  • IEEE 802.1Q VLAN tag transparent
  • Selectable CPE and CO mode via DIP switch
  • Supports flow control for Fast Ethernet (pause frame or Back Pressure)
Su precio
€511,99 EUR
IVA no incluido en el precio
Where to buy StarTech.com products
Dónde comprar

The 110VDSLEXTGB VDSL Ethernet extender kit allows you to span a 10/100 network over extremely long distances (up to 1km) while still maintaining high-speed network connectivity. The device allows you to run the connection over standard RJ45 cabling, existing RJ11 phone lines, or any other set of single pair wires. The VDSL (VDSL2) kit is simple to install and provides an out-of-the-box solution as both the Ethernet-VDSL extender and receiver units are included.

A perfect solution for a broad range of applications including connecting isolated user stations within the same building or between separate buildings, or overcoming infrastructure obstacles and distances (e.g. older stone/concrete architecture) where new wiring or wireless may be impossible. The VDSL Ethernet LAN Extender kit helps to eliminate expense by allowing video streaming and data to share the same telephone pair without interference.

The 110VDSLEXT requires only a single pair of wires to function, while offering the ability to use multiple sets of the devices to create several simultaneous connections to your remote building. In these multiple set configurations, you have the ability to use up to 4 sets over a single Cat5e or Cat6 cable which can be used as separate LAN (or VLAN) connections, or bridged into a trunk line for additional speed/bandwidth over long distances (up to two sets only over standard Cat5).

Solution Diagrams:
Solution Diagrams

Backed by a StarTech.com 2-year warranty and free lifetime technical support.

Aplicaciones

  • Provide ethernet over copper connectivity to a user or network segment that is in an isolated area of a large complex or in another building altogether
  • Extend network connectivity to remote areas of stadiums, auditoriums or other venues
  • Industrial applications include controlling CNC machinery, polling bar code scanner data, administering process control equipment, and other harsh environment applications
  • Monitor and control medical equipment, security keypads/card scanners, point of sale equipment and remote sensor data, and various other healthcare related network communications
  • Remote sensor monitoring for traffic flow management (air traffic control, expressway flow)

La ventaja de StarTech.com

  • Provides high speed Ethernet extension over copper telephone line or other existing two pair wiring enabling network connectivity to remote locations up to 1km away
  • Allows network connectivity in buildings made of stone/concrete, or heritage buildings where new Ethernet cabling or wireless are impossible
  • Simple Plug and play installation with no software or driver installation for a hassle-free setup

Referencias de Distribución

  • CMS Distribution V209743
  • CMS Distribution Ireland 110VDSLEXTGB
  • Exertis 0010010542
  • Exertis IE 0010010542
  • Ingram IE V930828
  • Ingram Micro UK V930828
  • UPC 065030834513

Especificaciones

Warranty Information Warranty 2 Years
Características Físicas Color Negro
Longitud del Producto 95 mm [3,7 in]
Ancho del Producto 72 mm [2,8 in]
Altura del Producto 22 mm [0,9 in]
Peso del Producto 90 g [3,2 oz]
Conector(es) 2 - Conectores de la Unidad Local RJ-45
2 - Conectores de Unidad Remota RJ-45
Contenido de la Caja 1 - Incluido en la Caja Extender
Receiver
2 - Incluido en la Caja RJ-45 to VDSL Cable
Power Adapter
1 - Incluido en la Caja Instruction Manual
Hardware Estándares Industriales IEEE 802.3/802.3u/802.3x 10/100 Base-T Auto-Negotiation, Auto-MDI/MDI-X
On-board surge protection
VDSL2 ITU-T G.993.2, VDSL ITU-T G.993.1, and VDSL2/VDSL ITU-T G.997.1 compliant
Indicadores 3 - Indicadores LED VDSL: Power On/Off, CO/CPE, Idle/Trained/Link
LAN: ACT/LNK, 10/100 Mbps, Half/Full Duplex
Información de la Caja Longitud de la Caja 13,7 cm [5,4 in]
Ancho de la Caja 14,8 cm [5,8 in]
Altura de la Caja 95 mm [3,7 in]
Peso (de la Caja) del Envío 940 g [33,2 oz]
Observaciones / Requisitos Nota You have the ability to use up to four sets over a single Cat5e or Cat6 cable which can be used as separate LAN (or VLAN) connections, or bridged into a trunk line for additional speed/bandwidth over long distances (Up to two sets only over standard Cat5).
Rendimiento Tasa de Transferencia de Datos Máxima 0m - 100Mbit/s
300m - 75Mbit/s
1km - 10Mbit/s
Distancia Máxima 1 km (0.6 mi)
Requisitos Ambientales Temperatura Operativa 0°C to 50°C (32°F to 122°F)
Temperatura de Almacenamiento 0°C to 70°C (32°F to 158°F)
Humedad 10~90% RH
Requisitos de Energía Adaptador de Corriente Incluido 2 adaptadores de CA (corriente alterna) incluidos
Tensión de Entrada 230 AC
Tensión de Salida 12V DC
Alimentación de Salida 1A
Polaridad Central Positivo
Tipo de Enchufe M
Consumo de Energía 12

Accesorios

Descontinuado
RJ12FT

12 ft RJ11 Telephone Modem Cable

Coloque un módem a 3,6 m del ordenador

Su precio
€1,99 EUR

Verificar la disponibilidad del revendedor

Where to buy StarTech.com products
SVA12M2NEUA

Adaptador de Alimentación de 12V de DC - 12 Voltios y 2 Amperios - Adaptador de Corriente de Repuesto

Reemplace su adaptador de alimentación extraviado o averiado

Su precio
€25,99 EUR

Disponible en stock: 176

Where to buy StarTech.com products
SVA12M5NA

Adaptador de Alimentación de Corriente Directa DC - 12V 5A - Tipo Barril M

Reemplace su adaptador de alimentación extraviado o averiado

Su precio
€65,99 EUR

Disponible en stock: 52

Where to buy StarTech.com products

Controladores y Descargas

Consulte a un asesor técnico.

Siempre estamos a su disposición para ayudarle con cualquier pregunta o duda que tenga.

Chat en Línea (opens in new window)

Manual:

Ficha Técnica

Soporte de Productos

Consulte a un asesor técnico.

Siempre estamos a su disposición para ayudarle con cualquier pregunta o duda que tenga.

Chat en Línea (opens in new window)

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* La apariencia y las especificaciones del producto están sujetas a cambios sin previo aviso.
Volver al inicio
Espere...