StarTech.com

Fristående videoinspelning och -strömning - HDMI eller komponent, 1080p - USB 2.0

Spela in HD-videor på en PC eller ett SD-kort utan dator och strömma live-video över internet i realtid

Produkt ID: USB2HDCAPS

  • Fristående videoinspelning med hjälp av SD-lagring
  • Fristående videoströmning med hjälp av den inbyggda LAN-porten
  • Spela in video till din dator genom USB
Visa mer
  • Problemfri användning
  • Lättanvänd programvara inkluderad
  • H.264 kodning
  • HDMI video-genomströmning
  • Stöder NTSC och PAL
235,99 € EUR exkl. moms
294,99 € EUR inkl. moms

Överblick

Denna HD inspelningsenhet gör att du kan spela in en HDMI- eller komponent-videokälla, med ljud, genom en USB-port på din dator.

Med två fristående lägen för inspelning eller direktuppspelning gör inspelningsenheten att du kan spela in direkt till ett SD-kort för fristående inspelning eller använda den inbyggda LAN-porten för att strömma video över internet. 

Spela in eller strömma 1080p video

Denna mångsidiga inspelningsenhet har en SD-kortplats, vilket gör att du kan spela in video direkt på kortet utan att behöva ansluta inspelningsenheten till din dator. Det är det perfekta sättet att spara tid och samtidigt få stöd för icke-Windows®-baserade plattformar som till exempel Mac-datorer eller Android™-surfplattor. Program ingår också så att du kan strömma eller spela in innehåll med din Windows.

För problemfri videoströmning har inspelningsboxen även en inbyggd RJ45-nätverksport som gör att du kan ansluta inspelningsenheten direkt till din router eller switch. Med denna fristående nätverksanslutning kan du omedelbart strömma din videokälla över Internet med hjälp av strömningstjänster som till exempel Twitch®.

Lättanvänd programvara

Enheten kodar i H.264, världens vanligaste video-codec, så att du kan vara säker på att dina videoinspelningar är kompatibla med nästan alla plattformar utan att redigering eller konvertering behövs. H.264 stöds dessutom av de flesta mjukvarutitlarna inklusive Adobe® Premiere® och Windows Media® Encoder. 

Och med det medföljande programmet kan du ta skärmdumpar, schemalägga inspelningar och strömma din videokälla omedelbart över Internet. Programmet är kompatibelt med NTSC- och PAL-system vilket är perfekt för professionella tillämpningar inom videoarkivering där källmedia kan variera från projekt till projekt.

Problemfri användning

Denna enhet har enknappsinspelning för enkel videoinspelning genom knapptryckning med hjälp av den medföljande programvaran eller inspelning och strömning genom knapptryckning i fristående läge. De inbyggda portarna för videogenomströmning gör det möjligt att göra videorecensioner i realtid samtidigt som du spelar in eller strömmar innehåll.

För att maximera bärbarheten är inspelningsenheten USB-driven, vilket innebär att du inte behöver använda en extra strömadapter eller hitta ett ledigt vägguttag. 

Obs.: 

  • Denna USB videoinspelningsenhet spelar inte in digitalt krypterat innehåll.
  • Vid fristående videoströmning utan PC-programmet är den maximala upplösningen 720p.
  • Fristående strömning stöder SD-kort upp till  64G (FAT32-filsystem), HiSpeed (klass 10) SD-kort rekommenderas.

USB2HDCAPS täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

Arkivera videor i ett digitalt bibliotek

Skapa genomgångar och instruktionsvideor

Spela in videor för skärminspelningar, produktdemonstrationer, handledning online, klassrumsundervisning, presentationer eller konferenser

Tekniska specifikationer

Information om garanti
Garanti 2 Years
Hårdvara
Audio Ja
AV-ingång Component
HDMI
S-Video (4-stift, Mini-DIN) hona
HDMI
AV-utgång Component
HDMI
S-Video (4-stift, Mini-DIN) hona
USB
Chipset-ID Analog Devices - ADV7513
Industristandarder NTSC, PAL-M, PAL-60, PAL Videokodning: MPEG4/H.264
Prestanda
Viktiga punkter angående fristående användning
Maximal upplösning för fristående videoströmning är 720p.
Ditt SD-kort måste vara formaterat i FAT32.
Maximal storlek på SD-kort är 64 GB
SD-kort på klass 10 eller högre rekommenderas
Audio-specifikationer HDMI eller komponent RCA stereo
Maximal dataöverföringshastighet 100 Mbps
Maximal digital upplösning Video input: 1080p/30/50/60
Video capturing: 1080p/30
Software Video streaming: 1080p
Standalone Video streaming: 720p/30
Stödda upplösningar 1080i/p, 720p, 576i/p, 480i/p
Kontakt(er)
Connector A 1 - HDMI (19-stifts) Hona Input
1 - Komponentvideo (3 x RCA) Hona Input
1 - Stereoaudio (2 x RCA) Hona Input
1 - USB B (4-stifts) Hona Output
Connector B 1 - HDMI (19-stifts) Hona Output
1 - SD-/MMC-plats Honuttag
1 - RJ-45 Hona
Mjukvara
OS-kompatibilitet Windows® 10 (32/64bit), 8 / 8.1 (32/64bit), 7 (32/64bit), Vista (32/64bit), XP (32/64bit)
Indikatorer
LED-indikatorer 1 - Videokälla
1 - USB (ström)
Ström
Power Source Strömförsörjd via USB
Miljö
Drifttemperatur 0°C to 45°C (32°F to 113°F)
Förvaringstemperatur -5°C to 60°C (23°F to 140°F)
Luftfuktighet 20%~80%
Utseende
Produktbredd 86 mm [3.4 in]
Produkthöjd 27 mm [1.1 in]
Produktlängd 138 mm [5.4 in]
Produktvikt 160 g [5.6 oz]
Förpackning
Fraktvikt (förpackning) 0.5 kg [1.2 lb]
Vad det är i lådan
Ingår i paketet 1 - Inspelningsenhet
1 - USB 2.0-kabel
1 - hdmi-kabel
1 - Instruktionsbok

Kompatibilitet

Se alla kompatibla operativsystem
Windows® 10 (32/64bit), 8 / 8.1 (32/64bit), 7 (32/64bit), Vista (32/64bit), XP (32/64bit)

Certifikat

Relaterade produkter

HDMI till ExpressCard HD-videoinspelningskortadapter 1080p
ECHDCAP
HDMI till ExpressCard HD-videoinspelningskortadapter 1080p

Spela in och konvertera audio/video från en HDMI®-källa genom en 34 mm ExpressCard-kortplats

256,99 € exkl. moms
321,24 € inkl. moms
S-Video/komposit till USB-videoinspelningskabel med stöd för TWAIN och Mac
SVID2USB23
S-Video/komposit till USB-videoinspelningskabel med stöd för TWAIN och Mac

Spela in och konvertera S-video eller kompositvideo till din PC eller Mac® som digital media

52,99 € exkl. moms
66,24 € inkl. moms

Tillbehör

Produktsupport

Drivrutiner & hämtningsbara filer

Vanliga frågor

Before You Buy

You can use a video capture device to capture or record an audio and video output signal to a connected computer.  You can use USB, ExpressCard, or PCI Express technology to connect a video capture device to a computer system.  StarTech.com has video capture devices that can capture audio and video from sources such as HDMI, DVI, VGA, S-Video, component, or composite.  The captured signals are usually recorded with software that is included with the video capture device.  Some software will also stream the captured signals online.

Select a capture device that features the audio and video connections you want to use.  These can be identified on the product page, under the Technical Specifications tab.  Whenever possible, you should avoid using adapters or converters with video capture devices as they can cause issues or negatively impact the quality of the audio or video signals being captured.

When looking at a video capture device that requires software to use, it is important to consider the operating system you want to use it on.  You can find this on the product page under the Technical Specifications tab, which only lists supported operating systems.

Consider what resolution and refresh rate you require.  You can find the supported resolutions and refresh rates on the product page, under the Technical Specifications tab in the Performance section. 

Video capture device usually use drivers and software to record audio and video.  Both the drivers and the software can be found on the product page under the Support tab.  Different software will have different features so it’s a good idea to review the software to make sure it is a good fit for your intended usage.  You can do so by looking at the manual for the device, also located on the Support tab.  StarTech.com only supports the software included with the video capture device. 

HDCP stands for High-Bandwidth Digital Content Protection.  This system protects high definition video from being intercepted, modified, or recorded between the source and the display.  All StarTech.com devices adhere to the HDCP standard, so they do not record HDCP-protected content.  HDCP content that is being blocked often appears as a blank screen or a screen with an HDCP error shown on it.

Certain video capture devices allow you to stream video feeds online with streaming platform such as YouTube.  For more information, review the product manual or watch our video on this subject.  You can find a link to the video in the description.  If at this point you have further questions about a Startech.com video capture device contact our technical support team for further assistance. 

Although you may be able to plug in all of the connectors used for video standards associated with video capture cards/cables, you may still encounter issues that may prevent the video from being captured correctly.

About copyright protection

Some video sources implement copyright protection when you are plugging into a non-display device. Examples of copyright protection include the following:

  • High Definition Content Protection (HDCP). This type of copyright protection is included with DVI and HDMI® and can appear as a video error or blank screen. HDCP may also appear on the screen.

  • Analogue Content Protection (ACP). This type of copyright protection is included with analogue video (for example, composite, s-video, or component). ACP can appear as a brightness pulsing up and down.

Copyright protection cannot legally be bypassed, and StarTech.com does not offer any products that do so.

Using video adapters

It is possible to passively convert video signals to different connector types, but the video standards will not always match between the video source and video destination. You may need to actively convert from one video type to another to ensure that the correct conversion is being made. When a passive converter is not available, most video standards can be converted with active converters.

Examples of incompatible passive conversions include the following:

  • VGA source to composite or component (RCA) video, or composite or component (RCA) video to VGA.
  • Composite (RCA) source to s-video.
  • VGA to DVI-D and DVI-D to VGA.

Note: S-video to composite can be passively converted. DVI-I/DVI-A and VGA can be used bidirectionally.

About output resolution

If your video source has the ability to change resolutions (for example, a computer), it may be possible to send an incompatible resolution. To verify that the correct resolution is being used, navigate to www.StarTech.com and click the Technical Specifications tab for your product. Make note of the Industry Standards and Maximum Resolution specifications.

In the operating system's display management, you can adjust your video source to match or go below the maximum resolution and if possible, the refresh rate of your capture card.

Due to High-bandwidth Digital Content Protection (HDCP), it is not possible to record from certain gaming consoles. HDCP content (for example, movies) are protected, but the console itself may or may not have permanent HDCP enabled on the HDMI output.

For more information about consoles and their permanent HDCP enforcement, consult the following table:

Console Permanent HDCP

PlayStation 3

Yes
PlayStation 4

Optional. You can change the settings in the menu.

Wii U

No

XBox 360

No
XBox One No

You can use a video capture card with consoles that do not have permanent HDCP enabled.

Certain StarTech.com video capture cards are compatible with DirectShow and will work with many third-party video capture applications that are compatible with DirectShow. For more information on DirectShow compatible video capture cards, refer to the following FAQ: https://www.startech.com/faq/video-capture-cards-directshow.

Although third-party software might work with this video capture card, StarTech.com does not officially support or endorse the use of third-party applications.

No, you cannot use this capture card to turn your video camcorder into a webcam. This capture card does not use a DirectShow compatible driver, which is a requirement for many of the software applications that enable you to use your video camcorder as a webcam. 

For a list of video capture cards that you can use to turn a video camcorder into a webcam, refer to the following FAQ: https://www.startech.com/faq/video-capture-cards-webcam-capable.

In order for network streaming to work with ShareView, your network infrastructure must have a DHCP server included on the network. The DHCP server issues an IP address to the USB2HDCAPS and allows any computer on the same network running ShareView to discover the USB2HDCAPS.

When you use network streaming with the USB2HDCAPS, consider the following:

  • A static IP address cannot be set.

  • Only a 10/100 connection is required.

  • StarTech.com only supports the use of ShareView software for network streaming and does not support the use of third-party streaming software.

This video capture card cannot record from more than one input at the same time.  

Note: Although the USB2HDCAPS can be connected to multiple computers on the same network, only one device can capture video at a time.

 

Installation

Before you install the USB2HDCAPS, do the following:

  1. Make sure that your operating system is current (for example, the most recent service pack is installed).

  2. Make sure that Microsoft .NET Framework 3.5 is installed.

To verify if .NET Framework 3.5 is installed and install it if it is not installed, complete the following steps:

  1. Press the Windows key + X, and then click Programs and Features.
  2. Click Turn Windows features on or off.
  3. Find .NET Framework 3.5 (includes .NET 2.0 and 3.0) at the top of the list, and do one of the following.
    • If there is a small box inside of the .NET Framework 3.5 check box, .NET Framework is installed on your system and no further action is required.
    • If there is not a small box inside of the .NET Framework 3.5 check box, click inside of the check box and then click OK. Windows will start installing .NET Framework 3.5 on your system.

Before you complete the following, make sure that .NET Framework is installed on your system.

  1. Navigate to http://www.startech.com/Support and download the latest software. The part number is USB2HDCAPS.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. When the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. In the list of extracted files, right-click the setup.exe file and select Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in step 2.

  1. Follow the on-screen instructions to install the software.

When the software finishes downloading, it will be ready to use.

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Navigate to http://www.startech.com/Support and download the latest software. The part number is USB2HDCAPS.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. When the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. In the list of extracted files, right-click the setup.exe file and select Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in step 2.

  1. Follow the on-screen instructions to install the software.

When the software finishes downloading, it will be ready to use.

Hur man

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

A single USB2HDCAPS can stream over the network to multiple systems simultaneously. This allows multiple systems running ShareView to view or record the input to the USB2HDCAPS.

Multiple USB2HDCAPS can also exist on the network and can be selected in the ShareView Settings menu.

Only the first system that is connected to the USB2HDCAPS can change the settings; other systems that are connected to the unit can only view and record the video data.

Note: While third-party software may work with the USB2HDCAPS, StarTech.com only supports the use of ShareView software for network streaming.

  1. Open a web browser and navigate to https://www.youtube.com/live_dashboard.
  2. Under Encoder setup, copy and save the Server URL from the bottom of the page (you need the link to complete step 7).
  3. Click Reveal and copy and save the Stream name/key from the same area (you need this to complete step 8).
  4. Open ShareView.
  5. Click Settings Live Stream Settings.
  6. In the Website drop-down menu, click Custom RTMP.
  7. In the URL field, paste the link that you recorded in step 2.
  8. In the StreamKey field, paste the text that you recorded in step 3.

Note: There needs to be a "/" between the name and key.

  1. On the ShareView page, click the blue live button.

Problemsökning

When you troubleshoot issues with a video capture device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video source

  • Video capture device

To test your setup components, try the following:

  • Use the video cables, source, and capture device in another setup to see if the problem is with the components or the setup.

  • Use a different video cable, source, and capture device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video cables and source with the video capture device, make sure that the following is true:

  • Other video destinations work with the same video source. For more information, visit http://www.startech.com/faq/video_capture_cards_source_compatibility.

  • Adapters and extenders are kept to a minimum.

  • The video source is not copyright protected (for example, HDCP).

  • The video standard (for example, NTSC, PAL, HDMI, and so on) of the video source matches the Technical Specifications of the video capture device.

To check if the video capture device is detected in Windows®, complete the following:

  1. Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. Check to see if your device is listed under Sound, video and game controllers.

  2. Do one of the following:

When you test the video capture device on your computer, make sure that the driver and capture software is installed on your system for your adapter. Some cards may be able to support third party software, however, support is limited. For more information, visit https://www.startech.com/faq/video-capture-cards-third-party-software.

Note: The USB3HDCAP requires a compatible USB 3.0 card.

You should not upgrade your device's firmware if you do not have any issues with the functionality of your device. The only time you should consider an upgrade is if you are experiencing a problem with the device, and you have confirmed that the firmware addresses this problem.  You can confirm this is the case by reviewing the documentation included with the firmware or from consulting with our Technical Support team. Incorrectly upgrading firmware can result in diminished performance so it is best to contact StarTech.com if you would like to perform this operation.