StarTech.com

USB 3.0 SATA Hard Drive Duplicator & Eraser Dock - Standalone 2.5/3.5in HDD & SSD Eraser and Cloner

Clone a 2.5in/3.5in SATA drive without a host computer connection, or dock the drives over USB 3.0 for easy access

Produkt ID: SATDOCK2REU3

  • Supports 2.5in and 3.5in form factor SATA hard drives (HDD) and solid state drives (SSD)
  • Standalone Sector-by-Sector hard drive duplication
  • Stand alone single pass overwrite erase
Visa mer
  • SuperSpeed USB 3.0 compliant host interface, with up to 5 Gbps of data bandwidth
  • High Speed USB 2.0 compliant host interface, with transfer rates up to 480Mbps
  • Supports SATA revision I/II/III (1.5/3.0/6.0 Gbps) drives
  • Plug-and-Play and Hot-Swap compatible
  • Universal Power Adapter (NA/UK/EU)
  • Built-in LED progress bar
101,99 € EUR exkl. moms
127,49 € EUR inkl. moms

Överblick

The SATDOCK2REU3 USB 3.0 Standalone Duplicator and Eraser Dock lets you connect your 2.5in/3.5in SATA HDDs or SSDs through SuperSpeed USB 3.0, with the ability to swap drives in and out as needed. The dock also functions as a standalone drive duplicator and eraser – an efficient and versatile solution for external drive management.

Featuring standalone Sector by Sector hard drive duplication with built-in LED progress bar, and support for 2 drive single pass over writing the SATDOCK22EU3 is a user-friendly all-in-one solution for any application requiring hard drive duplication or erasing.

With support for SATA I/II/III, and large capacity drives (tested up to 4TB) this HDD/SSD docking station is compatible with virtually any SATA hard drive, and greatly increases the storage/backup capabilities of your computer.

Extend the value of this hard drive docking station further with the addition of our SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in. IDE hard drive into a SATA hard drive dock.

The SATDOCK2REU3 is backed by a 2-year StarTech.com warranty and free lifetime technical support.

Fördelarna med StarTech.com

  • Quickly copy hard drives, with standalone sector by sector HDD/SSD duplication
  • Securely erase up to two drives simultaneously, with Single Pass HDD overwriting
  • Hassle-free access to drive data, with hot-swappable top slot-loading dock design that supports both 2.5in and 3.5in HDD/SSDs

Användning

System administrators who need quick access to drives for imaging

Data Archiving

Technicians who regularly test or benchmark different hard drives and need to swap between them

Forensic investigators who require disk sector imaging/cloning to create an exact replica of a source drive onto a different drive

Professionals who require identical backups for when data integrity is crucial, such as data recovery

Cloning hard drives that contain hidden partitions, that some software disk cloning programs may skip

IT administrators that wish to quickly clear/erase a drive in preparation for use in other applications

Data recovery specialists who need quick access to drives to recover/retrieve data

Tekniska specifikationer

Information om garanti
Garanti 2 Years
Hårdvara
Antal enheter 2
Chipset-ID Prolific - PL2775
Enhetsinstallation Löstagbar
Enhetsstorlek 2.5in & 3.5in
Enhetstyp SATA
Fläkt(ar) Nej
Gränssnitt USB 3.0
Prestanda
Duplication Modes Sector by Sector (Whole Drive)
Duplication Speed 11GBpm
Maximal dataöverföringshastighet 3Gbps
Maximal enhetskapacitet Currently tested with up to 4TB 7200 RPM 3.5" hard drives and 1TB 7200 RPM 2.5" hard drives
Raderingslägen 1-Pass Overwrite (NIST SP 800-88 Rev 1 - Clear)
Typ och hastighet USB 3.0 - 5 Gbit/s
SATA II (3 Gbps)
Kontakt(er)
Enhetskontakter 2 - SATA data- & ström-kombo (7+15-stifts)
Värdkontakter 1 - USB Type-B (9-stifts) USB 3.0
Mjukvara
OS-kompatibilitet OS independent; No software or drivers required
Särskilda anmärkningar/krav
Obs. Destination drive must be the same size or larger than the source drive
Indikatorer
LED-indikatorer 1 - HDD1 / 75%
1 - HDD2 / 100%
1 - Link / 25%
1 - Power / 50%
Ström
Inspänning 110V-240V AC
Inström 1.2A
Kontakttyp M
Polaritet på mittpol Positiv
Power Source AC-adapter medföljer
Strömförbrukning 36
Utspänning 12 DC
Utström 3000mA
Miljö
Drifttemperatur 0°C to 85°C (32°F to 185°F)
Förvaringstemperatur -10°C to 95°C (14°F to 203°F)
Luftfuktighet 5-90%
Utseende
Produktbredd 103 mm [4.1 in]
Produkthöjd 62 mm [2.4 in]
Produktlängd 128 mm [5 in]
Produktvikt 424 g [15 oz]
Förpackning
Fraktvikt (förpackning) 885 g [31.2 oz]
Vad det är i lådan
Ingår i paketet 1 - HDD Dock
1 - USB 3.0 Cable
1 - Universal power adapter: comes ready for NA/EU/UK only when you buy in NA/EU/UK; comes ready for Australia and New Zealand only when you buy in Australia and New Zealand
1 - User Manual

Kompatibilitet

Se alla kompatibla operativsystem
OS independent; No software or drivers required

Certifikat

Relaterade produkter

1:1 Drive Duplicator and Eraser for 2.5in / 3.5in SATA Drives
SATDUP11
1:1 Drive Duplicator and Eraser for 2.5in / 3.5in SATA Drives

Clone or Erase 2.5in/3.5in SATA hard drives, without a host computer connection

513,99 € exkl. moms
642,49 € inkl. moms
USB 3.0 SATA Hard Drive Docking Station SSD / HDD with integrated Fast Charge USB Hub and UASP For SATA 6 Gbps - White
SDOCKU33HW
USB 3.0 SATA Hard Drive Docking Station SSD / HDD with integrated Fast Charge USB Hub and UASP For SATA 6 Gbps - White

Dock your 2.5” or 3.5” SATA SSDs/HDDs and add USB Fast Charge Capacity in a stylish white docking station

70,99 € exkl. moms
88,74 € inkl. moms
1:2 Fristående USB-duplikator och -rensare för flashminnen
USBDUP12
1:2 Fristående USB-duplikator och -rensare för flashminnen

USB-duplikator | 1,5 GB i minuten | USB 2.0 | TAA-kompatibel

167,99 € exkl. moms
209,99 € inkl. moms
USB 3.0 eSATA till fristående dockningsstation med 4 fack för 1:3 SATA hårddisk-duplikator
SATDOCK4U3RE
USB 3.0 eSATA till fristående dockningsstation med 4 fack för 1:3 SATA hårddisk-duplikator

Duplicera en SATA-hårddisk till tre hårddiskar samtidigt

588,99 € exkl. moms
736,24 € inkl. moms
USB 3.0 SATA III-hårddisk dockningsstation SSD/HDD med integrerad snabbladdande USB-hubb samt UASP-stöd för SATA 6 Gbps - svart.
SDOCKU33HB
USB 3.0 SATA III-hårddisk dockningsstation SSD/HDD med integrerad snabbladdande USB-hubb samt UASP-stöd för SATA 6 Gbps - svart.

Docka dina 2,5" eller 3,5" SATA SSD/HDD-enheter och lägg till snabb USB-laddning med en elegant svart dockningsstation

96,99 € exkl. moms
121,24 € inkl. moms
USB till IDE SATA fristående dockningsstation för hårddisk-duplikator
UNIDUPDOCK
USB till IDE SATA fristående dockningsstation för hårddisk-duplikator

Klona en kombination av 2,5" eller 3,5" IDE- eller SATA-hårddiskar

263,99 € exkl. moms
329,99 € inkl. moms

Tillbehör