StarTech.com

6in 20 Pin Motherboard to 24 Pin ATX Power Adapter - M/F

Connect a newer 24-Pin Power Supply with an older 20-Pin Motherboard

Produkt ID: ATX2024FM

  • Adapter cable converts your existing standard 24-pin ATX power supply to work as a 20-pin ATX power supply
4,99 € EUR exkl. moms
6,24 € EUR inkl. moms

Överblick

The ATX2024FM 20 to 24-pin power supply adapter provides a cost-effective way to connect a 20-pin compatible motherboard to a power supply with a 24-pin connector. The adapter lets you use a newer 24-pin power supply with an older 20-pin motherboard.

Fördelarna med StarTech.com

  • StarTech.com's adapter cable converts your existing standard 24-pin ATX power supply to work as a 20-pin ATX power supply
  • Easy to use and install
  • Backed by StarTech.com's lifetime warranty

Användning

Works as an internal ATX power supply converter

Tekniska specifikationer

Information om garanti
Garanti Lifetime
Kontakt(er)
Connector A 1 - ATX ström (24-stifts, v 2.x) Honuttag
Connector B 1 - ATX ström (20-stifts, v 1.x) Kontakt
Utseende
Kabellängd 152.4 mm [6 in]
Produktlängd 152.4 mm [6 in]
Produktvikt 48 g [1.7 oz]
Förpackning
Fraktvikt (förpackning) 0.1 kg [0.1 lb]

Certifikat

Produktsupport

Vanliga frågor

Problemsökning

When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Power supply

  • Computer part

  • Power cable

To test your setup components, try the following:

  • Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.

  • Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cable, it is recommended that you do the following:

  • Make sure that the cable is firmly inserted into both ends.

  • The polarity (usually indicated by the color of the cables) matches.

  • No pins are bent or missing on the power supply cable or header, or the computer part.