6in LP4 to 8 Pin PCI Express Video Card Power Cable Adapter

Convert a Standard LP4 Power Supply Connector to an 8-pin PCI Express Video Card Power Connector


7,99 € EUR exkl. moms
9,99 € EUR inkl. moms


The LP4PCIEX8ADP 6-inch LP4 to 8-Pin PCI Express Power Adapter converts a standard LP4 power connector on your existing power supply to an 8-pin PCI Express video card power connector, allowing you to install a PCIe graphics card without having to upgrade the computer power supply.

Fördelarna med

  • Eliminates the need to upgrade your power supply with an 8-Pin power connector for PCI-Express Video Cards
  • Easy to use and install
  • Backed by lifetime warranty


Powering a PCI Express video card with an older power supply that doesn't feature a PCIe power connection

Tekniska specifikationer

Information om garanti
Garanti Lifetime
Connector A 2 - LP4 (4-stifts, Molex strömkontakt för stor enhet) Hane
Connector B 1 - PCI Express-ström (8-stifts, v 2.x) Hane
Särskilda anmärkningar/krav
System- och kabelkrav Two 4-Pin LP4 connectors from your existing ATX Power Supply and a Video card that utilizes PCI-Express 8-Pin connector
Kabellängd 152.4 mm [6 in]
Produktbredd 25 mm [1 in]
Produkthöjd 15 mm [0.6 in]
Produktlängd 152.4 mm [6 in]
Produktvikt 18 g [0.6 oz]
Tråddimension 18 AWG
Förpackningsantal 1
Fraktvikt (förpackning) 24 g [0.8 oz]
Vad det är i lådan
Ingår i paketet 1 - 6in LP4 to 8 Pin PCI Express Video Card Power Cable Adapter


Relaterade produkter

LP4 to 6-Pin PCI Express Video Card Power Cable Adapter
LP4 till 6-stifts PCI Express videokorts-strömkabeladapter på 15 cm

Konvertera en standard LP4-nätaggregatskontakt till en 6-stifts PCI Express videokorts-strömkontakt

2,99 € exkl. moms
3,74 € inkl. moms


Vanliga frågor


When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Power supply

  • Computer part

  • Power cable

To test your setup components, try the following:

  • Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.

  • Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cable, it is recommended that you do the following:

  • Make sure that the cable is firmly inserted into both ends.

  • The polarity (usually indicated by the color of the cables) matches.

  • No pins are bent or missing on the power supply cable or header, or the computer part.