StarTech.com

50cm Serial Attached SCSI SAS Cable - SFF-8484 to 4x SATA

Connect a SATA/SAS Controller to 4 SATA drives

Produkt ID: SAS84S450

  • 1x SFF-8484 connector
  • 4x SATA connectors
  • Supports up to 6Gbps per channel
  • Multi-lane design
42,99 € EUR exkl. moms
53,74 € EUR inkl. moms

Överblick

The SAS84S450 SFF-8484 to 4x SATA SAS cable features one 32-pin receptacle (SFF-8484) which fans out to four SATA 7-pin receptacles, providing a reliable solution for connecting up to four SATA HDDs to a SAS controller or backplane.

Designed and constructed for long-lasting dependability and reliability, the 50cm (19.7in) SAS to 4x SATA cable is backed by lifetime warranty.

Fördelarna med StarTech.com

  • Flexible, high speed SAS cable allows for easy installation and improved airflow
  • Guaranteed reliability

Användning

Connects up to four Serial ATA hard drives to a Serial-Attached SCSI (SAS) controller or backplane

Tekniska specifikationer

Information om garanti
Garanti Lifetime
Hårdvara
Kabelmanteltyp PVC - Polyvinyl Chloride
Kabelskärmning Aluminiumpolyesterfolie
Kontakt(er)
Connector A 1 - SFF-8484 (32-stifts, intern SAS) Honuttag
Connector B 4 - SATA (7-stifts, data) Honuttag
Utseende
Färg Röd
Kabellängd 0.5 m [1.6 ft]
Produktlängd 0.5 m [1.6 ft]
Tråddimension 26 AWG
Förpackning
Fraktvikt (förpackning) 0.1 kg [0.2 lb]
Vad det är i lådan
Ingår i paketet 1 - 50cm Serial Attached SCSI SAS Cable - SFF-8484 to 4x SATA

Certifikat

Produktsupport

Vanliga frågor

Problemsökning

When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Hard disk drive

  • Hard drive controller (for example, motherboard)

  • SATA cable

To test your setup components, try the following:

  • Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.

  • Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:

  • Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.

  • If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.

For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.