24in SATA to Left Angle SATA Serial ATA Cable
Make a left-angled connection to your SATA drive, for installation in tight spaces
Produkt ID: SATA24LA1
- 1x SATA connector
- 1x Left-angled/90-degree SATA connector
- Supports full SATA 3.0 6Gbps bandwidth
The SATA24LA1 Left Angle (90-degree) SATA Cable features a standard (straight) SATA receptacle as well as a left-angled SATA receptacle, providing a simple 24-inch connection to a Serial ATA drive, with full SATA 3.0 bandwidth support of up to 6Gbps when used with SATA 3.0 compliant drives.
The left-angled SATA connection enables you to plug in your Serial ATA hard drive in hard to reach areas or tight spaces, while the low profile and flexible design of the cable improves airflow and reduces clutter in your computer case, helping to keep the case clean and cool.
Constructed of only top quality materials and designed for optimum performance and reliability this 24" SATA cable is backed by our lifetime warranty.
As an alternative, StarTech.com also offers a 24in Right Angle SATA cable (SATA24RA1), which provides the same simple installation as this left angled SATA cable, but allows the cable to connected to the SATA drive from the opposite direction.
Fördelarna med StarTech.com
- Left-angled SATA connector easily fits into hard to reach areas and tight spaces, providing flexibility to position your SATA drive as needed within your system case
- Features a thin cable design, which helps reduce clutter and increase airflow within the computer/server case, for optimum system performance
- Backed by StarTech.com lifetime warranty, ensuring a dependable connection
Installing Serial ATA hard drives, and DVD drives in Small Form Factor computer cases
Server and storage subsystem applications
High-end workstation drive installations
Connections to SATA Drive Arrays
|Information om garanti|
|Kabelmanteltyp||PVC - Polyvinyl Chloride|
|Typ och hastighet||SATA III (6 Gbps)|
|Connector A||1 - SATA (7-stifts, data) Honuttag|
|Connector B||1 - SATA (7-stifts, data) Honuttag|
|Kabellängd||609.6 mm [24 in]|
|Kontakttyp||Rak till vänstervinklad|
|Fraktvikt (förpackning)||0 kg [0 lb]|
|Vad det är i lådan|
|Ingår i paketet||1 - 24in SATA to Left Angle SATA Serial ATA Cable|
Drivrutiner & hämtningsbara filer
When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Hard disk drive
Hard drive controller (for example, motherboard)
To test your setup components, try the following:
Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.
Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:
Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.
If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.
For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.
* Produkters utseende och specifikationer kan komma att ändras utan förvarning.