StarTech.com

8in Latching SATA to SATA Cable - F/F

Secure latching SATA cable designed for new system boards and SATA hard drives

Produkt ID: LSATA8

  • 2x Latching SATA connectors
  • Supports full SATA 3.0 6Gbps bandwidth
  • Compatible with both 3.5" and 2.5" SATA hard drives
  • Provides 8" in cable length
3,99 € EUR exkl. moms
4,99 € EUR inkl. moms
I lager hos partner:
Var kan jag köpa

Överblick

The LSATA8 SATA Cable features two latching 7-pin data receptacles and supports full SATA 3.0 bandwidth of up to 6Gbps when used with SATA 3.0 compliant drives.

The latching connectors lock when connected to a supporting (latchable) SATA port, ensuring a snug, and secured data connection every time to prevent accidental disconnects.

Featuring a low profile, yet durable construction, the flexible design improves airflow and reduces clutter in your computer case, helping to keep the case clean and cool.

Constructed of only top quality materials and designed for optimum performance and reliability this 8" SATA cable is backed by our lifetime warranty.

Fördelarna med StarTech.com

  • Latching SATA connectors provide a secured data connection and prevent accidental disconnections
  • Features a thin cable design, which helps reduce clutter and increase airflow within the computer/server case, for optimum system performance
  • Backed by StarTech.com lifetime warranty, ensuring a dependable connection

Användning

Installing Serial ATA hard drives, and DVD drives in Small Form Factor computer cases

Server and storage subsystem applications

High-end workstation drive installations

Connections to SATA Drive Arrays

Tekniska specifikationer

Information om garanti
Garanti Lifetime
Hårdvara
Antal ledare 2
Kabelmanteltyp PVC - Polyvinyl Chloride
Prestanda
Typ och hastighet SATA III (6 Gbps)
Kontakt(er)
Connector A 1 - SATA (7-stifts, data) Med lås Honuttag
Connector B 1 - SATA (7-stifts, data) Med lås Honuttag
Utseende
Färg Röd
Kabellängd 203.2 mm [8 in]
Kontakttyp Med lås
Produktlängd 203.2 mm [8 in]
Tråddimension 26 AWG
Förpackning
Förpackningsantal 1
Fraktvikt (förpackning) 0 kg [0 lb]
Vad det är i lådan
Ingår i paketet 1 - 8in Latching SATA Cable

Certifikat

Relaterade produkter

30 cm SATA-kabel med lås
LSATA12
30 cm SATA-kabel med lås

SATA-kontakter med lås, för säkert fastsatta hårddiskinstallationer.

2,99 € exkl. moms
3,74 € inkl. moms
Latching SATA to Right Angle SATA Serial ATA Cable
3,99 € exkl. moms
4,99 € inkl. moms
45 cm SATA-kabel med lås
LSATA18
45 cm SATA-kabel med lås

SATA-hårddiskkabel med låsbara SATA-kontakter, ger hårddiskinstallationer som sitter säkert.

3,99 € exkl. moms
4,99 € inkl. moms
Right Angle Latching Serial ATA SATA Cable
LSATA18RA2
18in Right Angle Latching SATA Serial ATA Cable

A space-saving, latching right angle SATA hard drive cable, for installations in tight spaces.

3,99 € exkl. moms
4,99 € inkl. moms
24in Latching SATA Cable
LSATA24
24in Latching SATA Cable

SATA hard drive cable, with latching SATA connectors, for securely fastened hard drive installations.

4,99 € exkl. moms
6,24 € inkl. moms
6in Latching SATA Cable
LSATA6
6in Latching SATA Cable

Secure latching SATA cable designed for new system boards and SATA hard drives

2,99 € exkl. moms
3,74 € inkl. moms

Produktsupport

Vanliga frågor

Problemsökning

When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Hard disk drive

  • Hard drive controller (for example, motherboard)

  • SATA cable

To test your setup components, try the following:

  • Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.

  • Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:

  • Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.

  • If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.

For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.