StarTech.com

PCI Express SATA 6 Gbps eSATA-kontrollerkort med 2 portar - PCIe SATA III-kort med dubbla portar - 2 interna/2 externa

Lägg till 2 externa eller interna SATA-portar 6 Gbps till din stationära dator genom en PCI-Express-kortplats

Produkt ID: PEXESAT322I

  • Två interna/externa växlingsbara SATA-portar
  • Uppfyller standard för SATA revision 3.0 med stöd för upp till 6 Gbps bandbredd
  • Stöd för SATA-baserade optiska enheter (CD/DVD/BD)
Visa mer
  • Använder existerande SATA I/II-kablar
  • Stöder ursprunglig kommandokö (NCQ) och ATA/ATAPI-kommandon
  • Med stöd för portmultiplicering samt FIS-baserad och kommandobaserad växling
  • Uppfyller standarder för PCI Express 2.0
  • Installationsfäste i lågprofil/halvhöjd medföljer
51,99 € EUR exkl. moms
64,99 € EUR inkl. moms

Överblick

Med PEXESAT322I PCI Express SATA III-kontrollerkort (6 Gbps) har du möjlighet att lägga till 2 interna eller externa SATA-portar till din dator via en enda PCI Express-kortplats (x1). Kortet har val för korskoppling vilket gör att du kan konfigurera kortet så att det har 2 interna eller externa SATA III-portar eller en av vardera, efter behov.

Varje port på SATA III-kortet har stöd för portmultiplicerare (PM) vilket gör att flera hårddiskar kan anslutas via en enda kabel vid behov, för att maximera antalet SATA-hårddiskanslutningar och minska på antalet kablar som behövs.

Kortet är helt kompatibelt med SATA revision 3.0 specifikationerna (upp till 6 Gbps bandbredd) vilket gör att du kan nyttja hastigheten i hårddiskar med hög kapacitet och solid state-hårddiskar (SSD), så väl som SATA-baserade optiska enheter (CD-ROM, DVD-ROM, Blu-Ray).

PEXESAT322I SATA III-kontrollerkortet täcks av 2-års tillverkargaranti och gratis livstidsgaranti på teknisk support.

Fördelarna med StarTech.com

  • Detta PCIe SATA-kontrollerkort har två SATA-kanaler som kan växla mellan de interna och externa (eSATA) portarna efter behov
  • Detta mångsidiga tilläggskort har SATA III-anslutning (6 Gbps) och är bakåtkompatibelt med SATA I- och SATA II-enheter (1,5 Gbps respektive 3 Gbps), vilket eliminerar kostnaderna för att uppgradera enheter
  • Eftersom både lågprofils-/helprofilsfästen medföljer går den att installera i alla stationära datorer oavsett storlek

Användning

Uppgradera ett äldre PCIe-baserat system med SATA 6 Gbps anslutningsmöjligheter och få större och snabbare utbyte av SATA-hårddiskar

Lägg till fler interna SATA-portar till ett datorsystem och anslut extra lagringsenheter och/eller optiska enheter

Lägg till interna och/eller externa SATA III-portar till en dator via en enda PCI Express-plats och få möjlighet att ändra lediga anslutningar till externa/interna efter behov vid uppdaterade systemkrav eller applikationer

Tekniska specifikationer

Information om garanti
Garanti 2 Years
Hårdvara
Busstyp PCI Express
Chipset-ID ASMedia - ASM1061
Gränssnitt eSATA & SATA
Korttyp Standardprofil (inkl. LP-fäste)
Portar 2
Porttyp Inbyggd på kort
Prestanda
ATAPI Support Ja
Bootable Ja
LBA-stöd 48-bit
Number of Drives Supported Through Port Multiplier 1 to 4
Number of Ports That Support Port Multiplier 2 (can use 2 PM at a time)
Port Multiplier Ja
RAID Nej
Typ och hastighet SATA III (6 Gbps)
Kontakt(er)
Externa portar 2 - eSATA (7-stifts, data) Kontakt
Interna portar 2 - SATA (7-stifts, data) Kontakt
Kontakttyp(er) 1 - PCI Express x1 Hane
Mjukvara
OS-kompatibilitet Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Miljö
Drifttemperatur 0°C to 50°C (32°F to 122°F)
Förvaringstemperatur -20°C to 60°C (-4°F to 140°F)
Luftfuktighet 5% ~ 85% RH
Utseende
Produktbredd 92 mm [3.6 in]
Produkthöjd 20 mm [0.8 in]
Produktlängd 121 mm [4.8 in]
Produktvikt 44 g [1.6 oz]
Förpackning
Fraktvikt (förpackning) 151 g [5.3 oz]
Vad det är i lådan
Ingår i paketet 1 - PCIe SATA-kontroller
1 - SATA-kabel
1 - Lågprofilsfäste
1 - Drivrutin CD
1 - Instruktionsbok

Kompatibilitet

Se alla kompatibla operativsystem
Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016

Certifikat

Relaterade produkter

1x eSATA + 1x SATA 6 Gbps PCI Express SATA-kontrollerkortadapter
PEXSAT31E1
1x eSATA + 1x SATA 6 Gbps PCI Express SATA-kontrollerkortadapter

Lägg till en extern och en intern 6 Gbps SATA 3.0-port för åtkomst till höghastighetslagring

42,99 € exkl. moms
53,74 € inkl. moms
SATA 6 Gbps PCI Express SATA-kontrollerkort med 2 portar
PEXSAT32
SATA 6 Gbps PCI Express SATA-kontrollerkort med 2 portar

Lägg till två SATA 6 Gbps-portar för höghastighetsåtkomst till stora interna lagringslösningar

48,99 € exkl. moms
61,24 € inkl. moms

Tillbehör

Produktsupport

Drivrutiner & hämtningsbara filer

Drivrutin(er):
Manual(er):
Specifikation(er)

Vanliga frågor

Before You Buy

Although you can adapt a Serial Attached SCSI (SAS) drive to connect to a standard SATA controller card, the card must support SAS commands in order to communicate with SAS drives. SAS drives have a different command set that is not present on SATA controllers.

This SATA controller card only supports standard SATA drives.

This device supports the ATA Packet Interface (ATAPI) protocol. ATAPI is required for optical drives, including CD-ROM drives, DVD-ROM drives, and Blu-ray players. Because this device supports ATAPI, optical drives are also supported.

 

Installation

Before you install this device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. In the list of extracted files, right-click the Setup.exe file and click Run as Administrator.

Note: If the Run as Administrator option is not available, you may be attempting to run the installer from within the zipped file. Extract the files using the instructions in step 2.

  1. Complete the instructions to install the device drivers, and restart your computer when prompted to.

Your computer will automatically complete the driver installation and your device should be ready to use.

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. You can find the part number and product ID on the product’s packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. In the list of extracted files, double-click the Setup.exe file.
  3. Complete the instructions to install the device drivers, and restart your computer when prompted to.

Your computer will automatically complete the driver installation and your device should be ready to use.

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions. The extracted files should open automatically.
  2. Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager.
  3. Right-click PCI Device, which will have a “!” or “?” next to it to indicate a driver issue, and click Update Driver.
  4. Click Browse my computer for driver software.
  5. Click Let me pick from a list of device drivers on my computer check box.
  6. On the Select your device’s type from the list below screen, click Show All Devices, and click Next.

Note: The Select your device’s type from the list below screen does not appear on all systems. If you do not see this screen, skip this step.

  1. Browse to the Manual Driver folder, choose the folder for your operating system and open the 32-bit or the 64-bit folder, depending on your system type.

Note: To view you system type, click Start, right-click Computer, and click Properties.

  1. Click the asahxp file. Click OK and click Next to install the driver.

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager.
  3. Right-click PCI Device, which will have “!” or “?” next to it to indicate a driver issue.
  4. Click Update Driver.
  5. On the Hardware Update Wizard screen, click Install from a list or specific location (Advanced), and then click Next.
  6. Select the Don’t search, I will choose the driver to install option, and then click Next.
  7. On the Hardware Type screen, click Show All Devices, and then click Next.

Note: The Hardware Type screen does not appear on all systems. If you do not see this screen, skip this step.

  1. On the Select the Device Driver you want to install for this hardware screen, select the Have Disk option.
  2. In the Install from Disk dialog box, click Browse.
  3. Browse to the Manual Driver folder, choose the folder for your operating system and open the 32-bit or the 64-bit folder, depending on your system type.

Note: To view your system type, click Start, right-click Computer, and then click Properties.

  1. Click the asahxp file. Click OK, and then click Next.

Hur man

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

In order to use a hard drive plugged into a hard drive controller card as your operating system, you need to install the operating system onto the hard drive while it is plugged into the expansion card. To do this, complete the following:

Note: Not all hard drive controller cards have drivers that allow you to install the operating system onto the hard drive. All of the hard drive controllers that display this FAQ include this capability.

Before you begin, consult the documentation that came with the motherboard to make sure that the motherboard or BIOS supports booting from an expansion card.

  1. Back up any data on the hard drive.
  2. Make a copy of the drivers from the website onto a floppy disc, CD, DVD, or USB flash drive. The drivers that you download depends on the operating system that you want to install.
  3. Install the hard drive controller card onto your motherboard.
  4. Plug the hard drive into the controller card.
  5. Turn on your computer and open the operating system install wizard.
  6. Before you select the hard drive that you want to install the operating system onto, select the option to install third-party drivers.
  7. Point the driver installer to the floppy disc, CD, DVD, or USB flash drive.
  8. Install the drivers.
  9. Select the hard drive on the hard drive controller card as the location where you want to install the operating system.
  10. Complete the on-screen instructions to finish installing the operating system.

Problemsökning

When you troubleshoot issues with a hard drive controller card, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • IDE, SATA, and eSATA cables

  • Hard drives

  • Hard drive controller card

To test your setup components, try the following:

  • Use the IDE, SATA, or eSATA cable, hard drive, and hard drive controller card in another setup to see if the problem is with the components or the setup.

  • Use a different IDE, SATA, or eSATA cable, hard drive, and hard drive controller card in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the hard drive and hard drive controller card, it is recommended that you do the following:

  1. To open the Device Manager, press the Windows key + R, type devmgmt.msc, and press Enter. Check the IDE ATA/ATAPI controllers (for IDE) section, or the Storage controllers (for SATA) section.

  2. Do one of the following:

Note: Formatting a hard drive erases all of the data on it. Make sure that you back up all of your data before you reformat the hard drive.

  1. To check Disk Management, press the Windows key + R, type diskmgmt.msc, and press Enter. Check to see if your hard drive is listed.

  2. If the hard drive is listed as healthy but does not have a drive letter, for example, C:, right-click healthy and click Change Drive Letter and Paths. Click Add, assign a drive letter, and click OK.

Note: A formatted hard drive does not show up in Computer or My Computer until it has a drive letter assigned to it.