StarTech.com

USB till DB9 RS232 seriell adapterhubb med 8 portar - Industriell DIN Rail och väggmonterbar

Lägg till 8 DIN Rail-monterbara RS232-serieportar till ett system genom USB

Produkt ID: ICUSB2328I

  • USB till standard RS232 seriell adapter med 8 portar
  • Tålig metallkonstruktion
  • Väggmonterbar och DIN Rail-klämmor medföljer
Visa mer
  • COM-lagring: Tilldelning av COM-porten finns kvar efter omstart
  • Överföringshastighet på upp till 921,6 Kbps
  • Strömförsörjs via en ledig USB-port - ingen extern strömadapter krävs
219,99 € EUR exkl. moms
274,99 € EUR inkl. moms
Inte tillgängligt
Kan finnas hos partners
Var kan jag köpa

Besök vår europeiska online-butik idag för fler produkter som denna!

Överblick

Den ICUSB2328I industriella hubben med 8 portar och DIN Rail-klämmor för anslutning mellan USB och seriell konverterar en enda USB-port till åtta RS232-serieportar och låter dig ansluta till, övervaka och kontrollera dina seriella enheter.

Denna seriella RS232-hubb med 8 portar och USB-anslutning har en tålig metallkonstruktion med stabila fästen för väggmontering och DIN Rail-klämmor (medföljer). Det ger många monteringsalternativ och är en robust lösning för både tuffa industriella miljöer och enkla skrivbordsinstallationer.

Denna USB-drivna adapter bevarar även tilldelade seriella COM-portvärden vid anslutning och låter samma värden automatiskt tilldelas till de seriella portarna på USB-hubben.

Täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Fördelarna med StarTech.com

  • Integrerade väggmonteringsfästen och de medföljande DIN-skenfästena ger mångsidiga monteringsalternativ
  • Tåligt metallkabinett ger extra hållbarhet i tuffa miljöer
  • Enkel plug-and-play-installation med vår USB-strömsatta adapter - inget eluttag behövs

Användning

Perfekt för IT-administratörer som vill att äldre enheter ska fungera på nyare bärbara datorer, PC-datorer och servrar som inte har integrerad RS232-port.

Anslut, övervaka och kontrollera industriella/fordon sensorer och utrustning

Anslut streckkodsläsare, kvittoskrivare och andra försäljningsenheter

Anslut en satellitmottagare, seriellt modem eller PDA med seriell synkning

Anslut och programera LED och digital skyltning med seriella kommunikationsportar

Tekniska specifikationer

Information om garanti
Garanti 2 Years
Hårdvara
Busstyp USB 2.0
Chipset-ID FTDI - FT232RL
Gränssnitt Seriell
Portar 8
Porttyp Extern hubb
Prestanda
Databitar 7, 8
FIFO 4096 byte Transmit and Receive
Maximal dataöverföringshastighet 921,6 kbps
Maximal överföringshastighet 921,6 kbps
Medeltid mellan fel (MTBF) 146 300 timmar
Paritet Odd, Even, Mark, Space, None
Seriellt protokoll RS-232
Stoppbitar 1, 2
Kontakt(er)
Externa portar 1 - USB B (4-stifts) Hona
8 - DB-9 (9-stifts, D-Sub) Hane
Mjukvara
OS-kompatibilitet Windows® CE (4.2, 5.0, 6.0), XP Embedded, 98SE, 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Mac OS® 10.6 to 10.13
Linux 2.4.x to 4.11.x LTS Versions only
Indikatorer
LED-indikatorer 1 - Ström
Ström
Inspänning 5 DC
Inström 250 mA
Kontakttyp M
Power Source Strömförsörjd via USB
Miljö
Drifttemperatur 0°C to 55°C (32°F to 131°F)
Förvaringstemperatur -20°C to 85°C (-4°F to 185°F)
Luftfuktighet 5~95 % RH
Utseende
Färg Svart
Kabinettyp Stål
Produktbredd 100 mm [3.9 in]
Produkthöjd 43.2 mm [1.7 in]
Produktlängd 180 mm [7.1 in]
Produktvikt 544 g [19.2 oz]
Förpackning
Fraktvikt (förpackning) 0.9 kg [1.9 lb]
Vad det är i lådan
Ingår i paketet 1 - USB till RS232-serieadapter
1 - Sats med DIN-skenor
1 - 1,8 m lång USB A- till B-kabel
1 - Drivrutin CD
1 - Instruktionsbok

Kompatibilitet

Se alla kompatibla operativsystem
Windows® CE (4.2, 5.0, 6.0), XP Embedded, 98SE, 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Mac OS® 10.6 to 10.13
Linux 2.4.x to 4.11.x LTS Versions only

Certifikat

Relaterade produkter

8 Port USB to RS232 Serial DB9 Adapter Hub
ICUSB2328
8 Port USB to RS232 Serial DB9 Adapter Hub

Add eight RS232 serial ports to any notebook or desktop computer using a single USB port

251,99 € exkl. moms
314,99 € inkl. moms
USB till seriell adapterhubb med 8 portar
ICUSB23208FD
USB till seriell adapterhubb med 8 portar

Konvertera en enda USB-port till åtta seriella portar och anslut flera hubbar för en skalbar lösning

317,99 € exkl. moms
397,49 € inkl. moms
USB till seriell adapterhubb med 16 portar
ICUSB23216FD
USB till seriell adapterhubb med 16 portar

Konvertera en USB-port till 16 seriella RS232-portar i ett industriellt hyllmonterbart chassi - och kedjekoppla flera hubbar för en skalbar lösning

606,99 € exkl. moms
758,74 € inkl. moms
16 Port Rackmount FTDI USB to Serial COM Adapter Hub - RS232 Multiplexer
ICUSB23216F
16 Port Rackmount FTDI USB to Serial COM Adapter Hub - RS232 Multiplexer

Convert a Single USB Port into 16 RS232 Serial Ports in a Hardened Industrial-grade Rack-mountable Chassis

502,99 € exkl. moms
628,74 € inkl. moms
FTDI USB till seriell RS232-kabeladapter med 1 port och COM-retention
ICUSB2321F
FTDI USB till seriell RS232-kabeladapter med 1 port och COM-retention

Lägg till en RS232-serieport med COM-lagring till din bärbara eller stationära dator genom USB

28,99 € exkl. moms
36,24 € inkl. moms
USB to RS232 DB9 Serial Adapter Cable with COM Retention
ICUSB232PRO
30 cm USB till RS232 seriell DB9 kabeladapter med COM-retention

Lägg till en RS-232 seriell port till din bärbara eller stationära dator genom USB; har också COM-port-bevaring

27,99 € exkl. moms
34,99 € inkl. moms
USB till seriell RS232 DB9-kabeladapter med 1 port – M/M
ICUSB232V2
USB till seriell RS232 DB9-kabeladapter med 1 port – M/M

Lägg till en RS232-serieport till din bärbara eller stationära dator genom USB

18,99 € exkl. moms
23,74 € inkl. moms
USB till RS232 DB9/DB25 seriell kabeladapter – M/M
ICUSB232DB25
USB till RS232 DB9/DB25 seriell kabeladapter – M/M

Lägg till en RS232 seriell port till en bärbar eller stationär dator med denna plug-and-play-USB-adapterkabel

18,99 € exkl. moms
23,74 € inkl. moms
FTDI USB till seriell RS232-kabeladapter med 1 port och optisk isolering
ICUSB2321FIS
FTDI USB till seriell RS232-kabeladapter med 1 port och optisk isolering

Lägg till en RS232-serieport med kretsisolering till din bärbara eller stationära dator genom USB

122,99 € exkl. moms
153,74 € inkl. moms
Professionell USB till seriell kabeladapter med 1 port och COM-retention
ICUSB2321X
Professionell USB till seriell kabeladapter med 1 port och COM-retention

Lägg till en seriell RS-232 port med retention till vilken bärbar eller stationär dator som helst med en USB-port

39,99 € exkl. moms
49,99 € inkl. moms
91 cm USB till RS232 DB9 seriell kabeladapter – M/M
ICUSB232SM3
91 cm USB till RS232 DB9 seriell kabeladapter – M/M

Lägg till en RS232-serieport till din bärbara eller stationära dator genom USB

27,99 € exkl. moms
34,99 € inkl. moms
1 Port Industrial USB to RS232 Serial Adapter with 5KV Isolation and 15KV ESD Protection
ICUSB232IS
1 Port Industrial USB to RS232 Serial Adapter with 5KV Isolation and 15KV ESD Protection

Add a galvanically isolated RS232 serial port with ESD protection through a USB port - DIN Rail Mountable

99,99 € exkl. moms
124,99 € inkl. moms
Micro USB till RS232 DB9 seriell adapterkabel för Android med USB-laddning - M/M
ICUSBANDR232
Micro USB till RS232 DB9 seriell adapterkabel för Android med USB-laddning - M/M

Lägg till en RS232 seriell port till din Android-smarttelefon eller surfplatta via Micro USB med USB-laddningsmöjligheter

40,99 € exkl. moms
51,24 € inkl. moms
USB till seriell RS232 DB9-adapter med löstagbar 1,8 m USB A till B-kabel
ICUSB232D
USB till seriell RS232 DB9-adapter med löstagbar 1,8 m USB A till B-kabel

Lägg till en seriell RS232-port till din bärbara eller stationära dator genom en löstagbar USB-kabel

18,99 € exkl. moms
23,74 € inkl. moms
91 cm 1s1p USB till seriell/parallell portadapterkabel
ICUSB2321284
91 cm 1s1p USB till seriell/parallell portadapterkabel

Lägg till en seriell RS232 och en parallell IEEE 1284 till din dator via en enda USB-anslutning

38,99 € exkl. moms
48,74 € inkl. moms
2 Port Wall Mountable USB to Serial Adapter Hub with COM Retention
ICUSB2322X
2 Port Wall Mountable USB to Serial Adapter Hub with COM Retention

Add 2 serial RS-232 ports to any laptop or computer with a USB port

55,99 € exkl. moms
69,99 € inkl. moms
USB till RS232 seriell DB9-kabeladapter med 2 portar
ICUSB232C2
USB till RS232 seriell DB9-kabeladapter med 2 portar

Lägg till 2 seriell RS-232 portar till vilken bärbar eller stationär dator som helst med en USB-port

46,99 € exkl. moms
58,74 € inkl. moms
FTDI USB till seriell RS232-kabeladapter med 2 portar och COM-retention
ICUSB2322F
FTDI USB till seriell RS232-kabeladapter med 2 portar och COM-retention

Lägg till två RS232-serieportar med COM-lagring till din bärbara eller stationära dator genom USB

61,99 € exkl. moms
77,49 € inkl. moms
2 Port Industrial Wall Mountable USB to Serial Adapter Hub with DIN Rail Clips
ICUSB2322I
2 Port Industrial Wall Mountable USB to Serial Adapter Hub with DIN Rail Clips

Add 2 DIN Rail-mountable RS232 Serial ports to any system through USB

70,99 € exkl. moms
88,74 € inkl. moms
USB till RS232 seriell DB9-adapterhubb med 4 portar
ICUSB2324
USB till RS232 seriell DB9-adapterhubb med 4 portar

Lägg till fyra seriella RS232-portar till en bärbar eller stationär dator genom en enda USB-port

99,99 € exkl. moms
124,99 € inkl. moms
USB till DB9 RS232 seriell adapterhubb med 4 portar - Industriell DIN Rail och väggmonterbar
ICUSB2324I
USB till DB9 RS232 seriell adapterhubb med 4 portar - Industriell DIN Rail och väggmonterbar

Lägg till 4 DIN Rail-monterbara RS232-serieportar till ett system genom USB

121,99 € exkl. moms
152,49 € inkl. moms
USB till seriell adapterhubb med med 4 portar och COM-retention, för väggmontage
ICUSB2324X
USB till seriell adapterhubb med med 4 portar och COM-retention, för väggmontage

Lägg till fyra seriell RS-232 portar till vilken bärbar eller stationär dator som helst med en USB-port

123,99 € exkl. moms
154,99 € inkl. moms
2 Port Industrial USB to Serial RJ45 Adapter - Wallmount and DIN Rail
ICUSB2322RJ
2 Port Industrial USB to Serial RJ45 Adapter - Wallmount and DIN Rail

Add two RS232 serial RJ45 connections to a PC or Server through USB, with this DIN Rail and wall-mountable adapter

70,99 € exkl. moms
88,74 € inkl. moms
FTDI USB to Serial Null Modem DCE Adapter Cable
ICUSB232FTN
USB till nollmodem RS232 DB9 seriell DCE-kabeladapter med 1 port och FTDI

Lägg till en RS232 seriell nollmodemsport till din bärbara eller stationära dator genom USB

30,99 € exkl. moms
38,74 € inkl. moms
2 Port USB to RS232 RS422 RS485 Serial Adapter with COM Retention
ICUSB2324852
2 Port USB to RS232 RS422 RS485 Serial Adapter with COM Retention

Add RS232, RS422 and RS485 support to your laptop or desktop computer via USB

126,99 € exkl. moms
158,74 € inkl. moms

Produktsupport

Vanliga frågor

Installation

Some driver installation packages may require you to disable driver signature enforcement in Windows 8, which will allow unsigned driver packages to be installed on your system.

Note: Before you continue, save any open documents and close all open programs.

To disable driver signature enforcement, complete the following:

  1. Press the Windows key + C.
  2. Click Settings > Change PC Settings.
  3. In the left pane, click General.
  4. In the right pane, under Advanced startup, click Restart now.

When your system finishes restarting, complete the following:

  1. Click Troubleshoot > Advanced options > Startup Settings > Restart.
  2. Press 7.

When your computer restarts, driver signature enforcement will be disabled and you can install your drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.

Some driver installation packages may require you to disable driver signature enforcement in Windows 8.1, which will allow unsigned driver packages to be installed on your system.

Note: Before you continue, save any open documents and close all open programs.

To disable driver signature enforcement, complete the following:

  1. Press the Windows key + C.
  2. Click Settings > Change PC Settings.
  3. In the left pane, click Update & Recovery.
  4. In the left pane, click Recovery.
  5. Under Advanced startup, click Restart now.

When your system finishes restarting, complete the following:

  1. Click Troubleshoot > Advanced options > Startup Settings > Restart.
  2. Press 7.

When your computer restarts, driver signature enforcement will be disabled and you can install your drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.­­­­­­­

You may need to disable Driver Signature Enforcement in Windows 10 to use some driver installation packages. When you disable this feature, you can install unsigned driver packages on your computer.

Note: Before you continue, save any open documents and close all of your programs. You will need to restart your computer to disable Driver Signature Enforcement.

To disable Driver Signature Enforcement, complete the following:

  1. Click the Windows icon in the taskbar.
  2. Click Power.
  3. Press and hold the Shift key and click Restart.

After your computer finishes restarting, complete the following:

  1. Click Troubleshoot Advanced Options Startup Settings > Restart.
  2. Press 7.   

When your computer finishes restarting, Driver Signature Enforcement will be disabled and you can install the drivers.

Note: When you restart your computer after you install your drivers, driver signature enforcement will be enabled again. This does not prevent your newly installed drivers from working, but does prevent any other unsigned drivers from being installed until driver signature enforcement is disabled.­­­­­­­

Hur man

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Problemsökning

When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Serial cables

  • Serial ports

  • Serial devices

To test your setup components, try the following:

  • Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup.

  • Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the serial ports and serial device, it is recommended that you do the following:

Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4.

To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:

  1. If your serial port is not female, convert it by taking a female/female cable or gender changer and plugging it into the serial port.
  2. Take a metal paperclip or wire and cross pins 2 and 3. If you look closely at the female end, the pins should be numbered.
  3. Open a telnet session on the COM port number of the device that you are testing. To find out the COM port number, refer to the following FAQ: https://www.startech.com/faq/com-port-listing-windows.

Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.

  1. When the session is open, anything you type into it you should see. The loopback test fails when you cannot see what you are typing.

If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port. 

You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session.  When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.