StarTech.com

Native PCI Express seriellt-kort med lågprofil, 1 port och 16950

Lägg till 1 RS-232-port med hög hastighet till en dator med en PCI express-kortplats

Produkt ID: PEX1S952LP

  • En RS-232 seriell port med dataöverföringshastigheter på upp till 460,8 kbps
  • Single lane PCI express med ursprungligt enkelchip
  • Fäste i lågprofil/halvhöjd och valfritt standard profilfäste medföljer
Visa mer
  • Valbar strömutgång på 9-pin för den seriella porten
  • Högpresterande enkanalig Oxford 950 UART
  • 128-byte FIFO-djup per sändare och mottagare
  • Automatiserad intern programflödesreglering med programmerbar Xon/Xoff i båda riktningarna
  • Automatiserad extern hårdvaruflödeskontroll med hjälp av Tx/Rx/RTS/CTS/DSR/DTR/DCD/RI/GND
  • Kompatibelt med PCI express-basspecifikation revision 1.0a
62,99 € EUR exkl. moms
78,74 € EUR inkl. moms
Inte tillgängligt
Kan finnas hos partners
Var kan jag köpa
Från en partner

Besök vår europeiska online-butik idag för fler produkter som denna!

Överblick

PEX1S952LP 1-ports PCI Express RS232 adapterkort för serieport i lågprofil med 16950 UART lägger till en RS232 (DB9) seriell port med dataöverföringshastigheter på upp till 460 kbps till en dator genom en tillgänglig PCIe-kortplats i lågprofil och förlitar sig på en ursprunglig, enkelchipdesign (Oxford OXPCIe952) som utnyttjar PCI express sanna förmågor - garanterar maximal prestanda och pålitlighet samt reducerar CPU-belastningen med så mycket som 48 % över vanliga (bridge chip) seriella kort.

Det RS232 seriella kortet med 1 port har ett PCI express monteringsfäste i halvhöjd som är särskilt designat för chassin i lågprofil/liten formfaktor och inkluderar även ett valfritt fäste i standardhöjd. Kompatibelt med en bred skara av operativsystem inklusive Windows® och Linux för enkel integrering i blandade miljöer.

Täcks av StarTech.coms livstidsgaranti och gratis livstidsgaranti på teknisk support.

Fördelarna med StarTech.com

  • Fäste i lågprofil för installation i system med liten formfaktor
  • Minskad CPU-belastning och ökad prestanda via nativ enkelchip design
  • Dataöverföringshastigheter på 460 kbps ger effektiva seriella enheter

Användning

Bankkassor i antingen helprofil eller lågprofil för att kontrollera seriella enheter så som kassalådor, kortläsare/magnetremseläsare, skrivare, knappsatser, pennplattor

POS-användning i livsmedelsbutiker och andra butiker för att kontrollera tangentbord, kassalådor, kvittoskrivare, kortläsare/magnetremseläsare, vågar och upphöjda skyltar och stolpar

Automater och kiosker för att kontrollera serieenheter så som vågar, pekskärmar, magnetiska kortläsare, streckkodsskannrar, kvittoskrivare, etikettskrivare

Vanliga bankomater för att kontrollera knappsatser, kvittoskrivare, kortläsare/magnetremseläsare, pekskärmar i LCD, kamerastyrning m.m.

Används för att kontrollera flera övervaknings-/säkerhetskameror i parkeringshus, kontorsbyggnader m.m.

Tekniska specifikationer

Information om garanti
Garanti Lifetime
Hårdvara
Busstyp PCI Express
Chipset-ID PLX/Oxford - OXPCIe952
Gränssnitt Seriell
Korttyp Lågprofil (SP-fästen ingår)
Portar 1
Porttyp Inbyggd på kort
Prestanda
Databitar 4, 5, 6, 7, 8
FIFO 128 Bytes
Maximal överföringshastighet 460.8 kbps
Medeltid mellan fel (MTBF) 87,600 Hours
Seriellt protokoll RS-232
Stoppbitar 1, 1.5, 2
Kontakt(er)
Externa portar 1 - DB-9 (9-stifts, D-Sub) Hane
Kontakttyp(er) 1 - PCI Express x1 Hane
Mjukvara
Microsoft WHQL-certifierad Ja
OS-kompatibilitet Windows® CE 6.0 / 5.0, 95, 98SE, 2000, XP, XP Embedded, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Linux 2.4.x to 4.11.x LTS Versions only
Särskilda anmärkningar/krav
Obs. Valbar strömutgång med 9-pin på serieporten
Miljö
Drifttemperatur -10°C to 80°C (14°F to 176°F)
Förvaringstemperatur -20°C to 100°C (-4°F to 212°F)
Luftfuktighet 5~85 % RH
Utseende
Produktbredd 65 mm [2.6 in]
Produkthöjd 20 mm [0.8 in]
Produktlängd 90 mm [3.5 in]
Produktvikt 48 g [1.7 oz]
Förpackning
Fraktvikt (förpackning) 0.1 kg [0.3 lb]
Vad det är i lådan
Ingår i paketet 1 - Seriellt kort med 1 portar
1 - Standardprofilfäste
1 - Drivrutin CD
1 - Instruktionsbok

Kompatibilitet

Se alla kompatibla operativsystem
Windows® CE 6.0 / 5.0, 95, 98SE, 2000, XP, XP Embedded, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016
Linux 2.4.x to 4.11.x LTS Versions only

Certifikat

Relaterade produkter

PCI Express RS232 seriell-kortadapter med 2 portar och 16950 UART
PEX2S950
PCI Express RS232 seriell-kortadapter med 2 portar och 16950 UART

Lägg till 2 RS232 seriella portar till din standarddator eller dator med liten formfaktor genom en PCI Express-utbyggnadskortplats

59,99 € exkl. moms
74,99 € inkl. moms
Native PCI express RS232 seriell-kortadapter med 2 portar och 16950 UART
PEX2S952
Native PCI express RS232 seriell-kortadapter med 2 portar och 16950 UART

Lägg till 2 seriella RS-232 portar till din helhöjds- eller lågprofilsdator via en PCI Express-kortplats

49,99 € exkl. moms
62,49 € inkl. moms

Tillbehör

Produktsupport

Drivrutiner & hämtningsbara filer

Drivrutin(er):
Manual(er):
Specifikation(er)

Vanliga frågor

Before You Buy

Serial cards derive power from the PCI or PCI Express slot on the motherboard. When you power serial devices from the serial card ports, the power provided by the slot may not be enough to power all of the devices and you should connect additional sources of power from the power supply. When you troubleshoot issues, you should connect an additional source of power.

Some signs that you are experiencing power-related issues include certain devices not working correctly, not all of the devices working at the same time, and certain devices not working at all.

Installation

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.
  3. Right-click PCI Serial Port, which will have a “!” or “?” next to it to indicate a driver issue.
  4. Click Update Driver.
  5. Click Browse my computer for driver software.
  6. Select the Let me pick from a list of device drivers on my computer option.
  7. On the Select your device’s type from the list below screen, click Show All Devices, and click Next.

Note: The Select your device’s type from the list below screen does not appear on all systems. If you do not see this screen, skip this step.

  1. Select the Have Disk option.
  2. Browse to the Windows folder, select the folder for your operating system, and open the 32-bit or the 64-bit folder, depending on your system type.

Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  1. Click the OxMf or OxPCIeMf file. Click OK, and then click Next.

Note: If you are using a serial card that uses the OxPCIeMf file and installation fails, repeat steps 4 to 9, then browse to the Windows folder. Browse to the Serial Port Driver folder and click the oxserleg file.  Click OK, and then click Next.

Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).

  1. Download the latest drivers from the StarTech.com website at http://www.startech.com/Support. The part number and product ID are on the product packaging.

Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).

  1. After the download is complete, right-click the zip folder that you downloaded, click Extract All, and complete the instructions.
  2. Press the Windows key + R, type devmgmt.msc, and press Enter to open the Device Manager.
  3. Right-click PCI Serial Port, which will have “!” or “?” next to it to indicate a driver issue.
  4. Click Update Driver.
  5. On the Hardware Update Wizard screen, click Install from a list or specific location (Advanced), and then click Next.
  6. Select the Don’t search, I will choose the driver to install option, and then click Next.
  7. On the Hardware Type screen, click Show All Devices, and then click Next.

Note: The Hardware Type screen does not appear on all systems. If you do not see this screen, skip this step.

  1. On the Select the Device Driver you want to install for this hardware screen, select the Have Disk option.
  2. In the Install from Disk dialog box, click Browse.
  3. Browse to the Windows folder, select the folder for your operating system, and open the 32-bit or the 64-bit folder, depending on your system type.

Note: To view your system type, click Start. Right-click Computer, and then click Properties.

  1. Click the OxMf or OxPCIeMf file. Click OK, and then click Next.

Note: If you are using a serial card that uses the OxPCIeMf file and installation fails, repeat steps 4 to 10, then browse to the Windows folder. Browse to the Serial Port Driver folder and click the oxserleg file.  Click OK, and then click Next.

Hur man

To confirm that Windows detects your expansion card, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Problemsökning

When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Serial cables

  • Serial ports

  • Serial devices

To test your setup components, try the following:

  • Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup.

  • Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the serial ports and serial device, it is recommended that you do the following:

Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4.

To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:

  1. If your serial port is not female, convert it by taking a female/female cable or gender changer and plugging it into the serial port.
  2. Take a metal paperclip or wire and cross pins 2 and 3. If you look closely at the female end, the pins should be numbered.
  3. Open a telnet session on the COM port number of the device that you are testing. To find out the COM port number, refer to the following FAQ: https://www.startech.com/faq/com-port-listing-windows.

Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.

  1. When the session is open, anything you type into it you should see. The loopback test fails when you cannot see what you are typing.

If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port. 

You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session.  When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.