StarTech.com

Bärbar SuperSpeed mini USB 3.0-hubb med 4 portar - Vit

Lägg till fyra externa USB 3.0-portar till din bärbara dator eller Ultrabook™ med en smal portabel hubb

Produkt ID: ST4300MINU3W

  • Fyra USB-portar av typ A som kan användas samtidigt
  • SuperSpeed USB 3.0-kompatibel med dataöverföringshastigheter på upp till 5 Gbps
  • Bakåtkompatibel med USB 2.0- och 1.0/1.1-specifikationer och -enheter
Visa mer
  • Kompakt och bärbar design med inbyggd kabel
  • Plug-and-play- och hot-swap-kompatibel
28,99 € EUR exkl. moms
36,24 € EUR inkl. moms

Överblick

Den ST4300MINU3W bärbara SuperSpeed mini USB 3.0-hubben (vit) med 4 portar ger dig flera USB-anslutningar genom att göra om en enda USB 3.0-port till fyra externa USB 3.0-portar. Designen med den inbyggda kabeln gör denna mini USB-hubb till det perfekta tillbehöret för din bärbara Mac®/PC eller Ultrabook™.

USB 3.0-hubben med 4 portar stöder USB 3.0-databandbredd (5 Gbps - upp till 10x snabbare än USB 2.0) och är bakåtkompatibel med USB 2.0- och 1.1-enheter för garanterad felfri prestanda från alla dina USB-tillägg/-enheter oavsett hur gamla de är.

Den externa USB 3.0-hubben är idealisk för hemma- och kontorsanvändare som kräver bärbarhet, är USB-driven och har en kompakt design med en inbyggd kabel så att inga extra kablar behövs för att ansluta hubben till systemet.

Täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Fördelarna med StarTech.com

  • Anslut upp till fyra USB 3.0/2.0/1.x-enheter samtidigt med deras maximala hastigheter
  • Kompakt design med en inbyggd kabel för enkel användning och bärbarhet

Användning

Användare med bärbar Mac/PC eller Ultrabook™ med begränsat antal USB 3.0-portar och flera USB 3.0-enheter

Gör svårnådda USB-portar mer lättillgängliga genom att placera hubben var du vill dit kabeln når

Separata USB-portar för att passa större USB-kontakter och förhindra trängsel

Tekniska specifikationer

Information om garanti
Garanti 2 Years
Hårdvara
Busstyp USB 3.0
Chipset-ID Genesys Logic - GL3522
Gränssnitt USB 3.0
Portar 4
Snabbladdningsport(ar) Nej
USB-C-enhetsport(ar) Nej
USB-C-värdanslutning Nej
Prestanda
Maximal dataöverföringshastighet 5 Gbps
Typ och hastighet USB 3.0 - 5 Gbit/s
Kontakt(er)
Externa portar 1 - USB Type-A (9-stifts) USB 3.0 Hane
4 - USB Type-A (9-stifts) USB 3.0 Hona
Mjukvara
OS-kompatibilitet OS Independent; No additional drivers or software required
Särskilda anmärkningar/krav
System- och kabelkrav Tillgänglig USB-port
Indikatorer
LED-indikatorer 1 - Ström
Ström
Power Source Strömförsörjd via USB
Miljö
Drifttemperatur 0°C to 40°C (32°F to 104°F)
Förvaringstemperatur -20°C to 60°C (-4°F to 140°F)
Luftfuktighet 0~80 % RH
Utseende
Färg Vit
Formfaktor Kompakt
Kabellängd 145 mm [5.7 in]
Kabinettyp Av plast
Produktbredd 36 mm [1.4 in]
Produkthöjd 14 mm [0.6 in]
Produktlängd 80 mm [3.1 in]
Produktvikt 38 g [1.3 oz]
Förpackning
Fraktvikt (förpackning) 112 g [4 oz]
Vad det är i lådan
Ingår i paketet 1 - USB 3.0-hub
1 - snabbstartsguide

Kompatibilitet

Se alla kompatibla operativsystem
OS Independent; No additional drivers or software required

Certifikat

Relaterade produkter

USB 3.0-/USB 2.0-kombohubb med 6 portar och 2A laddningsport – 2x USB 3.0 & 4x USB 2.0
ST7320USBC
USB 3.0-/USB 2.0-kombohubb med 6 portar och 2A laddningsport – 2x USB 3.0 & 4x USB 2.0

Lägg till 2x USB 3.0- och 4x USB 2.0-portar externt till en dator via en enda USB 3.0-anslutning

53,99 € exkl. moms
67,49 € inkl. moms
Mini USB 2.0-hubb med 4 portar
ST4200MINI
Mini USB 2.0-hubb med 4 portar

Ger 4 externa USB 2.0 portar i kompakt och bärbar formfaktor

10,99 € exkl. moms
13,74 € inkl. moms

Tillbehör

Produktsupport

Vanliga frågor

Before You Buy

It is possible to use some USB hubs without a power supply, however, doing so may prevent certain high-power USB peripherals from operating.

When a power adapter is not used on a hub that comes with a power adapter, power is drawn from the USB port on the computer and then divided between the ports on the hub. This reduces the power delivery to individual ports and high-powered USB peripherals, such as external hard drives, may not start.

On USB hubs that can use a power adapter, more power can be supplied to USB ports than what is possible with a single USB port.

If your USB peripherals require power adapters, they probably do not require power from the USB port and can be used on a USB hub without a power adapter. With USB peripherals that use power adapters, the USB ports on the hub are only used for data transfer and do not draw power from the hub.

USB peripherals that require low power (for example, keyboards and mice) can be used on hubs without a power adapter, in conjunction with other low-power USB peripherals. In this case, power is drawn from the computer's USB port, as described above.

Problemsökning

When you troubleshoot issues with a USB hub, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • USB A-to-B cable

  • Computer USB port

  • USB peripheral(s)

To test your setup components, try the following:

  • Use the USB cable and USB peripheral(s) in another setup to see if the problem is with the components or the setup.

  • Use a different USB cable, USB port, and USB peripheral in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the hub, make sure that you do the following:

  • If a power adapter is included, provide power to the USB hub.

  • Attach a USB peripheral. The USB hub will not appear in any hardware listings on your system, but USB devices do appear when they are connected.

  • Install the drivers for the USB peripheral.

  • Install the latest drivers for the USB controller and motherboard chipset.

Note: No drivers or software are required for the USB hub to work with your operating system. The USB hub works independently of software and works with any operating system.

When testing your USB peripherals, make sure that you do the following:

  • If required, attach external power.

  • Confirm that the peripheral works on a standard USB port.

If the USB peripheral(s) can be detected on a standard USB port and not on the hub, do the following:

  • Use a new USB A-to-B cable.

  • Test your setup using basic USB peripherals, such as a keyboard or mouse.

  • Test using another USB port.

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.