Gigabit-midspan med 1 port - PoE+-injektor - 802.3at och 802.3af

Deliver power and data to your Power over Ethernet device using this mountable PoE+ midspan

Produkt ID: POEINJ1G

  • Easily connect, power, and operate a Gigabit PoE-powered device (PD)
  • Supplies up to 30-watts power output
  • Flexible setup, with a desktop-sized, or surface-mountable housing
Visa mer
  • Save money by using your existing Cat5 or better Ethernet cable
  • Fast, plug-and-play setup and operation, with no configuration required
  • Provides one PoE+ (PSE, power and data) 10/100/1000Mbps compliant RJ45 port - 802.3at and 802.3af
  • Integrates shielded RJ45 connectors
  • Automatically detects the powered device to provide the appropriate level of power output
97,99 € EUR exkl. moms
122,49 € EUR inkl. moms
Inte tillgängligt
Kan finnas hos partners
Var kan jag köpa

Besök vår europeiska online-butik idag för fler produkter som denna!


This Gigabit Power over Ethernet (PoE+) injector supplies power and data connectivity to a Gigabit PoE-compliant device using standard Ethernet cable, at distances of up to 100 m (330 ft.).

The PoE midspan is a cost-effective alternative to upgrading your existing network switch to a PoE-capable model.

Convenience and cost savings

This versatile PoE injector lets you connect a PoE-powered device (PD) to a non-PoE network switch, so you can avoid the expense and aggravation of replacing your existing switch with a PoE-enabled model. It supplies up to 30 watts of power, so you can easily power and access a high-power PoE-compliant device, such as an IP camera or a wireless access point (WAP), using traditional copper (RJ45) Ethernet cable. The midspan injector makes it easy to extend data and power connectivity to your PoE+ device across long distances, even in a remote location where a typical power outlet isn’t available.

Easy to set up in mixed environments

You can integrate this compact injector discreetly into a variety of environments. It features a surface-mountable housing that’s perfect for installing on walls or under a desk, but it’s also palm-sized, for use on desktop surfaces.

Plus, with plug-and-play operation, you can enjoy fast and hassle-free setup without disrupting your workflow.

Intelligent power allocation

Not sure which class your PoE device is? The Gigabit PoE+ injector automatically detects the power requirements of your connected PoE PD, and delivers the appropriate level of power without damaging your device.

The POEINJ1G is backed by a 2-year warranty and free lifetime technical support.


Ideal for high-power PoE+ devices requiring Gigabit speeds such as PTZ (Pan, Tilt, Zoom) cameras and Wi-Fi® access points (WAP)

Enable remote installation of touchscreens, information kiosks, and phones in locations where a power connection isn’t available

Perfect for small and home offices, as well as SMB applications, including system integrations, and IT administration

Tekniska specifikationer

Information om garanti
Garanti 2 Years
Industristandarder IEEE 802.3af PoE, IEEE 802.3at PoE+
IEEE 802.3 (10BASE-T), IEEE 802.3u (100BASE-TX), IEEE 802.3ab (1000BASE-T)
Portar 1
Allmänna specifikationer 48 V DC, 30 W
Maximal dataöverföringshastighet 2 Gbps (Full-Duplex)
Maximal kabellängd 100 m [328 ft]
Kontakttyp(er) 2 - RJ-45 Hona
Särskilda anmärkningar/krav
Patents and Licenses The following patents are licensed for this product. This list might not be all inclusive.
• United States Patent No. 5,406,260 (expired)
• United States Patent No. 6,650,622
• United States Patent No. 7,457,250
• United States Patent No. 8,155,012
• United States Patent No. 8,902,760
• United States Patent No. 8,942,107
• United States Patent No. 9,019,838
• United States Patent No. 9,049,019
• United States Patent Application No. 14/695,456
• United States Patent Application No. 14/726,940
System- och kabelkrav If your connected devices do not meet the IEEE 802.3af or IEEE 802.3at PoE standard, then the POEINJ1G will not inject power to the connected device(s) / Ethernet cable(s)
LED-indikatorer 1 - Ström
Inspänning 100 ~ 240 AC
Inström 0.75 A
Kontakttyp M
Polaritet på mittpol Positiv
Power Source AC-adapter medföljer
Strömförbrukning 36
Utspänning 56 DC
Utström 0. 64 A
Drifttemperatur 0°C to 45°C (32°F to 113°F)
Förvaringstemperatur -20°C to 85°C (-4°F to 185°F)
Luftfuktighet 10~90 % RH icke-kondenserande
Färg Svart
Kabinettyp Av plast
Produktbredd 63 mm [2.5 in]
Produkthöjd 25 mm [1 in]
Produktlängd 70 mm [2.8 in]
Produktvikt 52 g [1.8 oz]
Fraktvikt (förpackning) 995 g [35.1 oz]
Vad det är i lådan
Ingår i paketet 1 - PoE+-injektor
4 - monteringsskruvar
1 - Strömadapter
4 - Strömkablar (NA/UK/EU/ANZ)
1 - Instruktionsbok


Relaterade produkter

Industriell Gigabit PoE+ Power over Ethernet-injektor med 2 portar 48 V/30 W – väggmonterbar
Industriell Gigabit PoE+ Power over Ethernet-injektor med 2 portar 48 V/30 W – väggmonterbar

Förse två Gigabit PoE-enheter med ström- och dataanslutning över standard Ethernet-kablage

177,99 € exkl. moms
222,49 € inkl. moms
Gigabit-midspan med 4 portar - PoE+-injektor - 802.3at/af
Gigabit-midspan med 4 portar - PoE+-injektor - 802.3at/af

Ge ström och data till fyra Power over Ethernet-enheter med hjälp av denna väggmonterbara PoE+ midspan-hub

190,99 € exkl. moms
238,74 € inkl. moms



Drivrutiner & hämtningsbara filer