StarTech.com

USB-C till Gigabit-nätverksadapter - USB 3.1 Gen 1 (5 Gbps) - vit

Lägg till en Gigabit Ethernet-port till din MacBook, Chromebook eller bärbara dator med USB Type-C

Produkt ID: US1GC30W

  • Lägg till en Gigabit Ethernet-nätverksanslutning till datorn genom den senaste USB 3.1 Gen 1-teknik (5 Gbps) och USB Type-C
  • Fungerar med de nyaste MacBook-, Chromebook Pixel™-datorerna och andra bärbara och stationära datorer med en USB-C-port
  • Thunderbolt 3 port-kompatibelt
Visa mer
  • Inbyggt stöd för drivrutiner i Chrome OS™, Mac OS 10.10, Windows® 8.1 för enkel installation
  • Strömförses direkt från USB-porten
  • Kompakt och lätt design för maximal portabilitet
  • Stöder automatiskt identifiering av 10/100/1000 Mbps
  • IEEE 802.3-, 802.3u- och 802.3ab-kompatibel
  • Med stöd för IEEE 802.1Q VLAN-taggning
  • Inbyggd kontrollsumma och avlastning för stor överföring
  • Stöd för upp till 9K jumboram
  • Wake-On-LAN-stöd
  • IEEE 802.3az Energy Efficient Ethernet-stöd
38,99 € EUR exkl. moms
48,74 € EUR inkl. moms
Inte tillgängligt
Kan finnas hos partners
Var kan jag köpa

Besök vår europeiska online-butik idag för fler produkter som denna!

Överblick

Nu kan du enkelt ansluta till ett Gigabit-nätverk genom USB-C™- eller Thunderbolt™ 3-porten på din bärbara eller stationära dator. Denna Gigabit Ethernet-nätverksadapter (GbE) ger en tillförlitlig nätverksanslutning utan att behöva installera drivrutiner. Den är redo att köra, med inbyggt stöd för drivrutiner för att garantera en snabb installation.

Kraftfulla Gigabit-nätverksanslutningar

USB Type-C™-nätverksadaptern stöder full Gigabit-bandbredd genom att utnyttja prestandan från USB 3.1 Gen 1 (5 Gbps). Du kan nå väldigt stora filer över ett nätverk med Gigabit-hastigheter.

Inbyggt stöd för drivrutiner gör installationen enkel

Kom igång snabbt. Koppla helt enkelt in adaptern i USB-C-porten på din bärbara dator och anslut till ditt nätverk. Nätverksadapterns chipset ger inbyggt stöd för drivrutiner så att du slipper installera extra mjukvara.

Problemfria anslutningar genom USB-C

USB Type-C-kontakten är mindre och enklare att använda än tidigare USB-kontakter. Det är en vändbar kontakt som kan anslutas till dina enheter med båda sidor upp. Du kan koppla in kabeln rätt varje gång - utan frustration eller risk för skador på porten.

Kompakt och lätt för perfekt bärbarhet

Denna USB Gigabit-nätverksadapter är kompakt och bärbar och är den idealiska nätverksadaptern för stationära datorer eller tillbehör för bärbara datorer. Den strömförses direkt från USB-porten så att den är enkel att ansluta när du är på väg. Dessutom gör den lätta designen adaptern till det perfekta resetillbehöret för din Chromebook Pixel™ eller MacBook.

US1GC30W har en vit design som passar perfekt med din Apple Mac och täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Användning

Lägg till Gigabit Ethernet till din MacBook eller Chromebook Pixel

Gör om din USB-C-port till en Gigabit LAN

Tekniska specifikationer

Information om garanti
Garanti 2 Years
Hårdvara
Busstyp USB 3.1 Gen 1
Chipset-ID Realtek - RTL8153
Gränssnitt RJ45 (Gigabit Ethernet)
Industristandarder IEEE 802.3, 802.3u och 802.3ab
Portar 1
Prestanda
Auto MDIX Ja
Kompatibla nätverk 10/100/1000 Mbps
Maximal dataöverföringshastighet 5 Gbps (USB 3.0)
2 Gbps (Ethernet - full-duplex)
Stöd för full-duplex Ja
Typ och hastighet USB 3.1 Gen 1 - 5 Gbit/s
Kontakt(er)
Externa portar 1 - RJ-45 Hona
Kontakttyp(er) 1 - USB Type-C (24-stifts) USB 3.0 Hane
Mjukvara
OS-kompatibilitet Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2016
Mac OS X® 10.7 to 10.13 VLAN tagging is currently not supported in Mac OS
Linux Kernel 2.6.25 to 4.11.x LTS Versions only
Ström
Power Source Strömförsörjd via USB
Miljö
Drifttemperatur 0°C to 70°C (32°F to 158°F)
Förvaringstemperatur -10°C to 80°C (14°F to 176°F)
Luftfuktighet 5% ~ 90% RH
Utseende
Färg Vit
Form Factor Inbyggd kabel
Kabellängd 145 mm [5.7 in]
Kabinettyp Av plast
Produktbredd 25 mm [1 in]
Produkthöjd 15 mm [0.6 in]
Produktlängd 210 mm [8.3 in]
Produktvikt 24 g [0.8 oz]
Förpackning
Fraktvikt (förpackning) 92 g [3.2 oz]
Vad det är i lådan
Ingår i paketet 1 - USB-C till GbE-nätverksadapter

Kompatibilitet

Se alla kompatibla operativsystem
Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2016
Mac OS X® 10.7 to 10.13 VLAN tagging is currently not supported in Mac OS
Linux Kernel 2.6.25 to 4.11.x LTS Versions only

Certifikat

Relaterade produkter

USB 3.0 till Gigabit Ethernet NIC-nätverksadapter
USB31000S
USB 3.0 till Gigabit Ethernet NIC-nätverksadapter

Lägg till gigabit E-nätverksanslutningsmöjligheter till en bärbar eller stationär dator via en USB 3.0-port

32,99 € exkl. moms
41,24 € inkl. moms
USB Type-C till Gigabit-nätverksadapter - USB 3.1 Gen 1 (5 Gbps)
US1GC30B
USB Type-C till Gigabit-nätverksadapter - USB 3.1 Gen 1 (5 Gbps)

Anslut till ett Gigabit-nätverk genom USB-C-porten på din dator

38,99 € exkl. moms
48,74 € inkl. moms
USB-C till Gigabit-nätverksadapter med extra USB-port
US1GC301AU
USB-C till Gigabit-nätverksadapter med extra USB-port

Använd USB Type-C-porten på din bärbara dator för att lägga till en Gigabit Ethernet-port och en USB 3.1 Gen 1-port (type-A)

58,99 € exkl. moms
73,74 € inkl. moms

Tillbehör

Produktsupport

Drivrutiner & hämtningsbara filer

Drivrutin(er):
Specifikation(er)

Vanliga frågor

Before You Buy

USB-C is a type of USB connector that is capable of supporting the following:

  • Data transfer speeds up to 10Gbps, if you use USB 3.1.
  • Bi-directional power delivery up to 100W, if both the USB host connection and the device support it.
  • Alternate modes, which deliver different types of data at different speeds. For example, DisplayPort Alternate Mode (DP Alt Mode).

If using Thunderbolt 3 over USB-C, the connection is capable of additional features. For example, Thunderbolt 3 is capable of 40Gbps of total bandwidth. For more information, refer to the following FAQ: https://www.startech.com/faq/thunderbolt-3-port-capabilities.

Not all USB-C ports or devices are capable of supporting all of the features listed above, or all of the features at the maximum capabilities. If you require a specific USB-C feature, your USB host connection, cables, and device must all support the feature that you require. For more information about whether your components support specific USB-C features, refer to the information provided by the manufacturers. 

Installation

Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).

To install the driver:

  1. Download the latest drivers from the StarTech.com website (http://www.startech.com/Support). You can find the part number and product ID on the product’s packaging.

Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).

  1. Once the download is complete, right-click the zip folder that you downloaded, select Extract All, and follow the on-screen instructions.
  2. Select the appropriate folder for your operating system.
  3. Right-click Setup.exe. 
  4. Click Run as Administrator.

Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.

  1. Follow the on-screen prompts to install the device drivers and restart the computer when prompted.
  2. Your computer will automatically complete the driver installation and your device should be ready to use.

Hur man

StarTech.com does not support a Preboot Execution Environment (PXE) as this requires third-party software. However, our devices can be used as long as the following conditions are met:

  1. The BIOS must support PXE.
  2. The BIOS must see the card.
  3. The environment must have drivers for the chipset used in the card.
  4. If using a USB networking card, the environment must have support for USB devices as well.

To confirm that Windows detects your USB device, complete the following:

  1. Press the Windows key+R, type devmgmt.msc, and press Enter.
  2. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.  For example, a USB controller card would be under Universal Serial Bus controllers.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

To confirm that the Mac OS detects your USB device, complete the following:

  1. Click the Apple icon.
  2. Click About This Mac.
  3. Click More Info or System Report.
  4. Under the appropriate heading, confirm that your USB device is listed and that there isn't an error. For example, a network card would be under Ethernet Cards.

You may need to refresh the System Information page after you plug in your device.  To do so, press Command R with the System Information page open.

Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.

Problemsökning

When you troubleshoot issues with a network adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Ethernet cables
  • Network devices
  • Computer system

To test your setup components, try the following:

  • Use the Ethernet cables, network devices, and computer system in another setup to see if the problem is with the components or the setup.
  • Use different Ethernet cables, network devices, and a different computer system in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.
  • Use short cables when you are testing.

When you test the Ethernet cables, network devices, and computer system, it is recommended that you do the following:

Sometimes an on-board network interface card (NIC) conflicts with a new NIC.  In these cases it is best to disable the on-board NIC.

The best way to disable your on-board NIC is to go into your BIOS and disable it there if possible.  To do this, consult your motherboard manual.

You can also disable any NIC in Windows.  Here is how you do this:

First click Start, or, in Windows 10 and 8, hold down the Windows key and press X.  Then click Control Panel.

Windows 10

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows 8

  1. Click Network and Sharing Center.
  2. On the left, click Change adapter settings.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows 7

  1. Click Network and Internet.
  2. Click Network and Sharing Center.
  3. On the left, click Change adapter settings.
  4. Right-click the NIC that you would like to disable and select Disable.

Windows Vista

  1. Click Network and Sharing Center.
  2. On the left, click Manage network connections.
  3. Right-click the NIC that you would like to disable and select Disable.

Windows XP

  1. Click Network Connections.
  2. Right-click the NIC that you would like to disable and select Disable.

If you are experiencing speed or connectivity issues, it is best to set a specific speed at half or full duplex in your settings.  You can set your network adapter to perform at a certain speed, but the device that the adapter is connected to (whether it is a router, switch, or computer) must also be able to perform at the same speed.

Note: You must log in as the local administrator before you continue.

To open Device Manager:

  • Press Windows key + R.
  • Type devmgmt.msc.
  • Click OK.
  1. Open the Networking adapters section.
  2. Right-click the network adapter that you want to change and select Properties.
  3. Click the Advanced tab.
  4. Scroll down to Speed & Duplex. By default, it is set to Auto-Negotiate. Select any of the speeds that you see in the list.
  5. Click OK and restart your computer.

If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power. 

The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
 

Windows 10 / 8

  1. On your keyboard, press the Windows key + X and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows 7 / Vista

  1. Click the Start button and select Control Panel.
  2. Click Hardware and Sound, then click Power Options.
  3. Click Change plan settings for the plan you want to change.
  4. Click Change advanced power settings.
  5. Click the plus sign (+) next to “USB settings” and “USB selective suspend setting” to expand the options and change the setting to Disabled.
  6. Click OK to apply the setting.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.

Windows XP

  1. On your desktop, right-click the My Computer icon and select Properties.
  2. Click the Device Manager tab.
  3. Expand Universal Serial Bus controllers by clicking the arrow to the left of it.
  4. Right-click the first USB Root Hub device and select Properties.
  5. Click the Power Management tab.
  6. Clear the box next to Allow the computer to turn off this device to save power.
  7. Click OK to apply the setting.
  8. Repeat steps 4-7 for any remaining devices in the Universal Serial Bus Controllers section with “Root Hub” in the name.

Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.