StarTech.com

USB DVI KVM-switch med 4 portar och DDM Fast Switching-teknik och -kablar

Kontrollera 4 DVI och USB-utrustade datorer med en enda uppsättning av kringutrustning, med USB Dynamic Device Mapping för att undvika fördröjningar vid växling

Produkt ID: SV431DVIUDDM

  • USB DDM-teknik och Dual Core-design för växling utan fördröjning
  • Stöder HD-upplösningar på upp till 1920x1200
  • Stöder DDC copy och emulering till alla portar
Visa mer
  • Fyra KVM-kablar (USB/DVI) på 1,8 m medföljer
  • Inbyggd USB 2.0-hubb med 2 portar
  • Snabbkommandon med ett knapptryck och knappar på frampanelen för att välja dator
  • Inga drivrutiner eller program behövs
390,99 € EUR exkl. moms
488,74 € EUR inkl. moms
Inte tillgängligt
Kan finnas hos partners
Var kan jag köpa

Besök vår europeiska online-butik idag för fler produkter som denna!

Överblick

SV431DVIUDDM USB DVI KVM-switchen med 4 portar låter dig kontrollera 4 DVI- och USB-utrustade datorer med en enda uppsättning av kringutrustning med högupplösta DVI-upplösningar på upp till 1920x1200.

De medföljande KVM-kablarna ger en lösning som fungerar direkt medan USB Dynamic Device Mapping (DDM) och Display Data Channel (DDC) reducerar fördröjning vid växling signifikant och förbättrar kompatibiliteten med din anslutna skärm och indataenheter för att bespara dig tid och pengar.

För nästa nivå inom KVM-prestanda integrerar denna DVI KVM-switch dual core-dedicerade körningar per kanal och innovativ USB DDM-teknik som låter dig växla mellan anslutna datorer snabbt med nästan ingen fördröjning. DDM upprätthåller en konstant kommunikationskanal mellan dina USB-tillägg och anslutna system för att undvika tiden det tar för systemen att känna av enheterna igen vid växling.

För ännu snabbare växling har KVM:en dessutom en All-time Display Data Channel-teknik (full DDC) för att upprätthålla skärmigenkänning mellan anslutna system, en enkel knapp för val av snabbkommando och en inbyggd USB-hubb med 2 portar som låter dig dela kringutrustning.

Täcks av StarTech.coms 2-årsgaranti och gratis livstidsgaranti på teknisk support.

Fördelarna med StarTech.com

  • Växla mellan enheter med minimal fördröjning genom snabbväxlande DDM-teknik
  • Snabb installation och användning med medföljande KVM-kablar
  • Nästan universell kompatibilitet med alla USB-enheter för indata genom USB DDM-portar

Användning

Kontrollera 4 USB-kapabla datorer med en enda uppsättning av tangentbord, mus och DVI-skärm

Använd för callcenters, supportavdelningar, utbildning och hemmakontor för att kontrollera flera system

Idealisk för finans-/bankväsendet, grafiska designers, multimedia-tillämpningar och industrier som använder CAD/CAM

Tekniska specifikationer

Information om garanti
Garanti 2 Years
Hårdvara
Audio Nej
Flera skärmar 1
Hyllmonterbar Nej
Kedjekoppling Nej
KVM-portar 4
Medföljande kablar Ja
PC-gränssnitt USB
PC-videotyp DVI
Prestanda
Hot-Key Selection Ja
IP-kontroll Nej
Maximal digital upplösning 1920x1200
Maximalt antal användare 1
Skärmvisning (OSD) & stöd för snabbtangenter Nej
Stöd för portval Tryckknapp och genvägskommandon
Kontakt(er)
Konsolgränssnitt 1 - DVI-I (29-stifts) Hona
2 - USB Type-A (4-stifts) USB 2.0 Hona
Övriga gränssnitt 1 - RJ-45 Hona
2 - USB Type-A (4-stifts) USB 2.0 Hona
Värdkontakter 4 - DVI-I (29-stifts) Hona
4 - USB B (4-stifts) Hona
Mjukvara
OS-kompatibilitet OS independent; No additional software or drivers required
Indikatorer
LED-indikatorer 4 - Indikatorer för datorval
4 - Indikatorer för val av snabbkommando
Ström
Inspänning 100 ~ 240 AC
Inström 0.4A
Kontakttyp M
Polaritet på mittpol Positiv
Power Source AC-adapter medföljer
Strömförbrukning 10
Utspänning 5 DC
Utström 2.0A
Miljö
Drifttemperatur 0°C to 60°C (32°F to 140°F)
Förvaringstemperatur -30°C to 70°C (-22°F to 158°F)
Luftfuktighet 0~80 % RH (icke-kondenserande)
Utseende
Färg Svart
Kabinettyp Stål
Produktbredd 138 mm [5.4 in]
Produkthöjd 22 mm [0.9 in]
Produktlängd 66 mm [2.6 in]
Produktvikt 1.2 kg [2.6 lb]
Förpackning
Fraktvikt (förpackning) 3.4 kg [7.4 lb]
Vad det är i lådan
Ingår i paketet 1 - KVM-switch
4 - 1,8 m DVI-D USB KVM-kablar
1 - Kabel för uppgradering av inbyggd programvara
1 - Universell strömadapter (NA/UK/EU)
1 - Instruktionsbok

Kompatibilitet

Se alla kompatibla operativsystem
OS independent; No additional software or drivers required

Certifikat

Relaterade produkter

USB DVI KVM-switch med 2 portar och DDM Fast Switching-teknik och -kablar
SV231DVIUDDM
USB DVI KVM-switch med 2 portar och DDM Fast Switching-teknik och -kablar

Kontrollera 2 DVI- och USB-utrustade datorer med en enda uppsättning av kringutrustning, med USB Dynamic Device Mapping för att undvika fördröjningar vid växling

283,99 € exkl. moms
354,99 € inkl. moms
USB VGA KVM-switch med 4 portar och DDM Fast Switching-teknik och -kablar
SV431USBDDM
USB VGA KVM-switch med 4 portar och DDM Fast Switching-teknik och -kablar

Kontrollera 4 VGA- och USB-utrustade datorer med en enda uppsättning av kringutrustning, med USB Dynamic Device Mapping för att undvika fördröjningar vid växling

386,99 € exkl. moms
483,74 € inkl. moms
USB VGA KVM-switch med 2 portar och DDM Fast Switching-teknik och -kablar
SV231USBDDM
USB VGA KVM-switch med 2 portar och DDM Fast Switching-teknik och -kablar

Kontrollera 2 VGA- och USB-utrustade datorer med en enda uppsättning av kringutrustning, med USB Dynamic Device Mapping för att undvika fördröjningar vid växling

280,99 € exkl. moms
351,24 € inkl. moms
KVM-switch för dubbla DVI-bildskärmar med audio, 2 portar & USB 2.0-hubb
SV231DD2DUA
KVM-switch för dubbla DVI-bildskärmar med audio, 2 portar & USB 2.0-hubb

Dela ett tangentbord, en mus och dubbla DVI-skärmar mellan 2 multimedia-datorer

358,99 € exkl. moms
448,74 € inkl. moms

Tillbehör

Produktsupport

Vanliga frågor

Before You Buy

Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types: 

Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).

Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.

DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.

KVM stands for Keyboard Video Mouse and KVM switches allow you to switch the use of a keyboard, display and mouse between multiple computers.  KVM switches also commonly let you switch audio and USB devices between computers.

There are different types of KVM switches as well.

  • Standard box KVM switches. (e.g. SV231USB)
  • Cable KVM switches. (e.g. SV211USB)
  • Multi-Monitor KVM switches.  (e.g. SV231DDUSB)
  • IP KVM switches. (e.g. SV841HDIE)

Standard box and cable KVM switches are a simple way to switch the use of a keyboard, display, and mouse between multiple computers.  Multi-monitor KVM switches allow you to switch multiple displays between computers, and IP KVM switches allow you to remotely control the KVM switch and connected computers over a network.

Here are some important things to consider before purchasing a KVM switch.

  • How many computers do you need to control?  Purchase a KVM switch that supports the number of computers in your setup.
  • Which video connections do your computers and display(s) support?  It is best practice to use the same video connections wherever possible.
  • Will you be using a PS/2 or USB mouse and keyboard?
  • Do you need multiple monitor support?  Ensure every computer can support the number of monitors you are looking to use in your setup.
  • Do you need audio support?
  • What resolution(s) do you want your display(s) running at?  The KVM switch must support the resolution(s) you want to use.
  • Would you like hotkey support?  Some KVM switches support the use of hotkey combinations to complete tasks such as switching between computers.

There are a couple of other important things you may want to take note of:

  • Some KVM switches require proprietary cables to function.  These KVM cables may vary by each KVM switch.  For StarTech.com KVM switches that require proprietary cables, the KVM switches will either come with these cables, or they will be listed in the Accessories tab on the individual product pages.  For more information, see our video dedicated to KVM switch cables.
  • Basic mice and keyboards are recommended for use with KVM switches.  Wireless, gaming or combo mice and keyboards (mice and keyboards that use a single USB connection / receiver for both units) can cause performance issues, and in general, are not supported for use with KVM switches.

It can be difficult to tell which ones are right for the KVM switch you are interested in.  How can you tell which KVM cables you require?  How can you tell if a KVM switch requires proprietary cables?  How do these cables work? 

Standard KVM Switches and Cables

Note: You will need one bundle of KVM cables per computer you want to connect to the KVM switch.

Standard KVM switches have no special cable requirements.  If you have spare video and PS/2 or USB cables, you can use them to hook up the KVM switch to your computers.  StarTech.com still sells KVM cable packages, but they are just for the convenience of buying them in bundles and usually involve some savings.  Keep in mind that even if you have some of the cables you need, it still might be advantageous to buy the bundle.

KVM Switches with Opposite Gender Video Connections

Some KVM switches use male video connections for the computers and female video connections for the console ports.  In this case you simply need a video extension cable, or a KVM cable package appropriate to the KVM switch.  This is so you cannot accidentally plug cables from your computer into the console ports.

KVM Switches Requiring Proprietary Cables

KVM switches can also use proprietary KVM cables to connect to the individual computers.  This is often done with larger KVM switches and KVM switches intended for a server environment.  These cables use a proprietary pinout which does not conform to the video standard in use, as the cable carries both the video and PS/2 or USB data along a single cable.

If you are unsure whether or not you need special cables, complete the following:

  1. Check the Technical Specifications tab on the individual product pages for What's in the Box.  This section lists everything that comes with your purchase, and your KVM switch might come with the cables.
  2. Check the Accessories tab.  This section lists potential accessories for the product you are looking at.  StarTech.com will list the appropriate KVM cables for the KVM switch here. 
  3. Check the Gallery and look at a picture of the back of the KVM switch.

Note: If there are no PS/2 or USB ports on the back of the KVM switch other than for the console, you will require proprietary cables.

If at this point you require further assistance in deciding which cables to purchase with your StarTech.com KVM switch, contact our technical support team.  

This device has a DVI-I connector and is compatible with both analog and digital DVI video signaling. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.

Target connection Conversion
VGA DVI to VGA: https://www.startech.com/Cables/Audio-Video/Video-Adapter/DVIVGA/.
HDMI

DVI to HDMI: https://www.startech.com/Cables/Audio-Video/HDMI/HDMI-to-DVI/.

DisplayPort DVI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.

Installation

  1. Turn off all of the computers and monitors that will be connected to the KVM switch.
  2. Connect the power adapter to the KVM switch.
  3. Connect the video cables from your monitors to the console video port on the KVM switch. 
  4. Turn on the monitors.
  5. Connect your keyboard and mouse to the console PS/2 or USB ports on the KVM switch.
  6. If you have not done so already, change the KVM switch to focus on port 1.
  7. Connect the video cables from PC1 to the KVM switch.
  8. Connect the PS/2 or USB cables from PC1 to the PC1 PS/2 or USB ports on the KVM switch.
  9. Turn on PC1. You should see the computer load the operating system that you are using on PC1.
  10. Make sure that the mouse and keyboard can control PC1.
  11. Repeat steps 4 to 8 for each additional computer that you want to connect to the KVM switch. Leave the computer in focus until you make sure that the mouse and keyboard can control the computer in step 8.

Problemsökning

There are some quick tests that you can perform to rule out potential issues. Start by turning off all of the connected computers and peripherals, unplugging everything from the KVM, including power, and leaving it for 10 seconds.  Then connect everything to the KVM following the procedure in the following FAQ: https://www.startech.com/faq/kvm-switches-setup.

You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • KVM switch

  • Video source (such as a DVR or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing your setup components, it is recommended that you avoid using any video adapters. For example, if you are converting a VGA source to HDMI to be used with an HDMI extender, you should test with an HDMI source.

To test your setup components, try the following:

  • Use the video cable, KVM switch, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different video cable, KVM switch, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the KVM switch from your setup and test to make sure that the video source and video destination work together without the KVM switch.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, KVM switch, and video destination all need to support the resolution that you are using.

There are four troubleshooting actions that you can try if some but not all of the ports and your computer are working with the KVM switch. 

  • To determine if a specific cable is the source of the problem, switch the cables that connect the KVM switch to the computers to one working port and computer, and one port and computer that is not working. Keep the computer plugged into the same ports and only switch the cables. If the issue persists when you switch cables, the issue may be with the cable itself.
  • To determine if the problem is between the computer and the KVM switch, using the same cables, connect the KVM switch to one computer that is working and one computer that is not working. If the issue persists when you switch computers, follows the issue may be with the computer and the KVM switch.
  • Try reinitializing the KVM.  This is done by following the setup instructions on the website.
  • To determine if the KVM switch is the source of the problem, if you have another KVM switch, disconnect the current KVM switch and connect the second KVM switch.

If the keys on your keyboard are repeating, complete the following:

  1. If the KVM you are using has USB ports, you can move your keyboard to the USB hub port on the back of the KVM (the USB hubs are marked).

Note: When you move the keyboard out of the keyboard port, you will not be able to access the hotkeys.

  1.  You can adjust the typematic rate in your operating system’s settings. Depending on the version of Windows you are running, you can adjust the typematic rate by doing one of the following:
    • Click Control Panel > Keyboard > Speed. Adjust the repeat delay and repeat rate until the keys no longer repeat.
    • Click Control Panel > Hardware and Sound > Devices and Printers. Right-click Keyboard Settings. Adjust the repeat delay and repeat rate until the keys no longer repeat.